[Thu Jan 26 16:06:19 2012] Detection parameters:
  Position = (325.9, 341.9) = 0 42 40.89 41 18 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.6 +/- 20.3
  Background counts = 102.0
  Rate = 0.006 +/- 0.001

[Thu Jan 26 16:06:21 2012] Off-axis axis estimate = 3.73'
[Thu Jan 26 16:11:23 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 16:11:23 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Thu Jan 26 16:11:23 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.079
[Thu Jan 26 16:11:23 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 8.29"
[Thu Jan 26 21:18:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src78.ximg exists
[Thu Jan 26 21:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src78.csv
[Thu Jan 26 21:18:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src78_1.ximg exists
[Thu Jan 26 21:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src78.csv
[Thu Jan 26 21:18:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 21:18:37 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Thu Jan 26 21:18:37 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Thu Jan 26 21:18:37 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly
[Fri Jan 27 04:11:11 2012] Source 90 is offset by 0.341822 and 7.445812 pixels which is larger than
2 X fitted extent = 5.086345 x 5.086345, not incorporating fit results
[Fri Jan 27 04:11:11 2012] Source 90 is offset by -0.672293 and -7.983821 pixels which is larger than
2 X fitted extent = 2.690809 x 2.690809, not incorporating fit results
[Fri Jan 27 04:11:11 2012] Spatial fit model total counts = 2569.440000, observed total counts = 2570.000000
[Fri Jan 27 04:11:11 2012] Offset between fit and detection position for source 90 = 7.531964 pixels
[Fri Jan 27 04:11:11 2012] 2599.003000 total counts/ 1918.530000 bgd. counts: snr = 15.535549
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 7.531964 pixels
  Position = (322.1, 335.4) = 0 42 42.35 41 17 40.9
  Extent = 14.8 (12.9-16.6)", rotation angle = 0
  Source counts = 680.5 +/- 51.0
  Background counts = 1918.5
  Rate = 0.03 +/- 0.002
[Fri Jan 27 04:11:11 2012] Source 90 is offset by -3.680138 and -0.510529 pixels which is larger than
2 X fitted extent = 1.912966 x 7.430253, not incorporating fit results
[Fri Jan 27 04:11:11 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:11 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 04:11:11 2012] Source does appear to be extended
[Fri Jan 27 04:11:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 04:11:11 2012] Source is confused with source 28
[Fri Jan 27 04:12:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan 27 04:12:11 2012] Initial guess for spatial extent in simple fitting = 14.81"
[Fri Jan 27 04:12:11 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.049
[Fri Jan 27 04:12:11 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 14.81"
[Fri Jan 27 08:16:34 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src72.ximg exists
[Fri Jan 27 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src72.csv
[Fri Jan 27 08:16:34 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src72_1.ximg exists
[Fri Jan 27 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src72.csv
[Fri Jan 27 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 08:16:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Fri Jan 27 08:16:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Fri Jan 27 08:16:35 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Fri Jan 27 14:47:14 2012] Warning, spatial fit 72 centroid is now closest to src. 89
[Fri Jan 27 14:47:14 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:14 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 14:47:14 2012] Source does appear to be extended
[Fri Jan 27 14:47:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 14:48:14 2012] XMMSAS src. selection expression = ellipse(27976.310000, 29129.136000, 888.744026, 888.744026, 0.000000, X, Y)
[Fri Jan 27 14:48:14 2012] Writing source region out to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src90_src.reg
[Fri Jan 27 14:48:14 2012] Extracting stamp from image fullrun_pn_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (271, 284) - (373, 386)
[Fri Jan 27 14:48:14 2012] XMMSAS bgd. selection expression = annulus(27976.310000, 29129.136000, 1481.240043, 2962.480085, X, Y) && !ellipse(26614.855800, 26373.068600, 509.527215, 509.527215, 0.000000, X, Y) && !ellipse(28831.611540, 27188.053600, 1403.232040, 1403.232040, 0.000000, X, Y) && !ellipse(27529.112830, 27353.546400, 641.577618, 641.577618, 0.000000, X, Y) && !ellipse(27216.654000, 27492.409600, 3479.952100, 3479.952100, 0.000000, X, Y) && !ellipse(25688.905120, 26705.096800, 401.221612, 401.221612, 0.000000, X, Y) && !ellipse(30497.330000, 27552.282000, 257.652007, 257.652007, 0.000000, X, Y) && !ellipse(29580.878235, 31962.420929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31750.002655, 31097.112366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30474.515860, 31486.785600, 428.394412, 428.394412, 0.000000, X, Y) && !ellipse(28466.415800, 30411.310000, 465.511213, 465.511213, 0.000000, X, Y) && !ellipse(26424.466600, 29802.072000, 348.545610, 348.545610, 0.000000, X, Y) && !ellipse(25762.238600, 28116.716600, 862.408025, 862.408025, 0.000000, X, Y) && !ellipse(27392.385376, 26408.290802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.684000, 26908.178000, 699.535220, 699.535220, 0.000000, X, Y) && !ellipse(25032.096191, 30242.392059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26481.590851, 29103.920807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.198792, 28453.138611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24898.630524, 27197.848724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.378160, 31360.988000, 1363.672039, 1363.672039, 0.000000, X, Y) && !ellipse(27038.878200, 30380.914000, 2669.904077, 2669.904077, 0.000000, X, Y) && !ellipse(27240.028000, 29307.488000, 1318.024038, 1318.024038, 0.000000, X, Y) && !ellipse(29015.370270, 29691.571716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24783.050000, 29575.013400, 1291.104037, 1291.104037, 0.000000, X, Y) && !ellipse(28878.379400, 28204.672000, 1292.512037, 1292.512037, 0.000000, X, Y) && !ellipse(24705.569600, 28328.292000, 2582.136074, 2582.136074, 0.000000, X, Y) && !ellipse(29139.556610, 28101.939301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25042.039276, 27794.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26572.792000, 25215.040000, 1112.408032, 1112.408032, 0.000000, X, Y) && !ellipse(31085.105600, 25540.328000, 1380.680040, 1380.680040, 0.000000, X, Y)
[Fri Jan 27 14:48:14 2012] Writing fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src90.gif
[Fri Jan 27 16:59:06 2012] Mean detx,y = (-133.00, -1966.82) 
[Fri Jan 27 16:59:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 16:59:25 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 16:59:26 2012] Setting source spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Fri Jan 27 16:59:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src90_bgd.pi.gz
[Sat Jan 28 11:06:26 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:26 2012] Error reading totcts from fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Sat Jan 28 11:06:32 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:32 2012] Using photon index=1.80, rate=0.0265, arf fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src90.arf
[Sat Jan 28 11:06:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:32 2012] Updating source flux to 7.1e-14
[Sat Jan 28 11:20:54 2012] Flag b found in src. 90 procflags, skipping spectral fitting
[Sat Jan 28 11:20:54 2012] Flag c found in src. 90 procflags, skipping spectral fitting