[Thu Jan 26 16:06:18 2012] Detection parameters:
  Position = (315.2, 286.3) = 0 42 45.03 41 14 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 679.9 +/- 38.5
  Background counts = 149.6
  Rate = 0.03 +/- 0.002

[Thu Jan 26 16:06:21 2012] Off-axis axis estimate = 1.50'
[Thu Jan 26 16:11:23 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 16:11:23 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Thu Jan 26 16:11:23 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Thu Jan 26 16:11:23 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 7.18"
[Thu Jan 26 21:18:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src56.ximg exists
[Thu Jan 26 21:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src56.csv
[Thu Jan 26 21:18:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src56_1.ximg exists
[Thu Jan 26 21:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src56.csv
[Thu Jan 26 21:18:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 21:18:37 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Thu Jan 26 21:18:37 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Thu Jan 26 21:18:37 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Fri Jan 27 04:11:11 2012] Source 67 is offset by -5.495689 and -7.322777 pixels which is larger than
2 X fitted extent = 0.844041 x 0.844041, not incorporating fit results
[Fri Jan 27 04:11:11 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:11 2012] Assessing source extent using major
[Fri Jan 27 04:11:11 2012] Source does appear to be extended
[Fri Jan 27 04:11:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 04:12:11 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 04:12:11 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Fri Jan 27 04:12:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Fri Jan 27 04:12:11 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 7.18"
[Fri Jan 27 08:16:33 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src53.ximg exists
[Fri Jan 27 08:16:33 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri Jan 27 08:16:33 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src53 appears to have run properly
[Fri Jan 27 08:16:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri Jan 27 08:16:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Jan 27 08:16:35 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Fri Jan 27 14:47:14 2012] Source 67 is offset by -5.474884 and -7.322777 pixels which is larger than
2 X fitted extent = 0.825177 x 0.825177, not incorporating fit results
[Fri Jan 27 14:47:14 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:14 2012] Assessing source extent using major
[Fri Jan 27 14:47:14 2012] Source does appear to be extended
[Fri Jan 27 14:47:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 14:48:13 2012] XMMSAS src. selection expression = ellipse(27373.285095, 24857.740417, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 14:48:13 2012] Writing source region out to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src67_src.reg
[Fri Jan 27 14:48:13 2012] Extracting stamp from image fullrun_pn_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (278, 249) - (353, 324)
[Fri Jan 27 14:48:14 2012] XMMSAS bgd. selection expression = annulus(27373.285095, 24857.740417, 1087.500000, 2175.000000, X, Y) && !ellipse(26614.855800, 26373.068600, 509.527215, 509.527215, 0.000000, X, Y) && !ellipse(28831.611540, 27188.053600, 1403.232040, 1403.232040, 0.000000, X, Y) && !ellipse(27529.112830, 27353.546400, 641.577618, 641.577618, 0.000000, X, Y) && !ellipse(27216.654000, 27492.409600, 3479.952100, 3479.952100, 0.000000, X, Y) && !ellipse(25688.905120, 26705.096800, 401.221612, 401.221612, 0.000000, X, Y) && !ellipse(27392.385376, 26408.290802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.684000, 26908.178000, 699.535220, 699.535220, 0.000000, X, Y) && !ellipse(28006.725000, 25594.291000, 460.752013, 460.752013, 0.000000, X, Y) && !ellipse(28629.509600, 25282.344400, 378.905611, 378.905611, 0.000000, X, Y) && !ellipse(28366.624600, 24062.772600, 397.008811, 397.008811, 0.000000, X, Y) && !ellipse(30283.744141, 23769.406738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24898.630524, 27197.848724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29197.813340, 25280.268400, 327.219209, 293.770408, 359.313691, X, Y) && !ellipse(28878.379400, 28204.672000, 1292.512037, 1292.512037, 0.000000, X, Y) && !ellipse(24705.569600, 28328.292000, 2582.136074, 2582.136074, 0.000000, X, Y) && !ellipse(25042.039276, 27794.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26572.792000, 25215.040000, 1112.408032, 1112.408032, 0.000000, X, Y) && !ellipse(26122.638855, 24675.111572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29320.985382, 24597.807739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25692.300000, 24996.300000, 1066.400031, 1066.400031, 0.000000, X, Y) && !ellipse(25872.230240, 23564.579800, 367.350411, 367.350411, 0.000000, X, Y) && !ellipse(26867.395813, 22196.705444, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 14:48:14 2012] Writing fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src67.gif
[Fri Jan 27 16:32:31 2012] Mean detx,y = (622.01, 2028.05) 
[Fri Jan 27 16:32:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 16:32:50 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 16:32:50 2012] Setting source spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Fri Jan 27 16:32:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Sat Jan 28 02:03:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 02:03:27 2012] rmf not generated due to insufficient counts
[Sat Jan 28 11:06:25 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:25 2012] Error reading totcts from fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sat Jan 28 11:06:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:31 2012] Using photon index=1.80, rate=0.0315, arf fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src67.arf
[Sat Jan 28 11:06:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:31 2012] Updating source flux to 7.7e-14
[Sat Jan 28 11:20:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting