[Thu Jan 26 16:06:17 2012] Detection parameters:
  Position = (321.3, 327.6) = 0 42 42.68 41 17 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 625.0 +/- 36.9
  Background counts = 123.6
  Rate = 0.03 +/- 0.002

[Thu Jan 26 16:06:21 2012] Off-axis axis estimate = 2.69'
[Thu Jan 26 16:11:23 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 16:11:23 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Thu Jan 26 16:11:23 2012] source mask rpix=1.8, npix_max = 20, mask sum = 22, frac = 1.052
[Thu Jan 26 16:11:23 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 7.77"
[Thu Jan 26 21:18:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src52.ximg exists
[Thu Jan 26 21:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src52.csv
[Thu Jan 26 21:18:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src52_1.ximg exists
[Thu Jan 26 21:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src52.csv
[Thu Jan 26 21:18:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 21:18:37 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Thu Jan 26 21:18:37 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Thu Jan 26 21:18:37 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Fri Jan 27 04:11:11 2012] Source 61 is offset by -3.592704 and 6.470145 pixels which is larger than
2 X fitted extent = 0.891862 x 0.891862, not incorporating fit results
[Fri Jan 27 04:11:11 2012] Warning, spatial fit 52 centroid is now closest to src. 90
[Fri Jan 27 04:11:11 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:11 2012] Assessing source extent using major
[Fri Jan 27 04:11:11 2012] Source does appear to be extended
[Fri Jan 27 04:11:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 04:11:12 2012] Source is confused with source 90
[Fri Jan 27 04:12:11 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 04:12:11 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Fri Jan 27 04:12:11 2012] source mask rpix=1.8, npix_max = 20, mask sum = 22, frac = 1.052
[Fri Jan 27 04:12:11 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 7.77"
[Fri Jan 27 08:16:33 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src49.ximg exists
[Fri Jan 27 08:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src49.csv
[Fri Jan 27 08:16:33 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri Jan 27 08:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src49.csv
[Fri Jan 27 08:16:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 08:16:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri Jan 27 08:16:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Jan 27 08:16:35 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Fri Jan 27 14:47:14 2012] Source 61 is offset by 2.796377 and 6.751179 pixels which is larger than
2 X fitted extent = 2.103030 x 2.103030, not incorporating fit results
[Fri Jan 27 14:47:14 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:14 2012] Assessing source extent using major
[Fri Jan 27 14:47:14 2012] Source does appear to be extended
[Fri Jan 27 14:47:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 14:48:13 2012] XMMSAS src. selection expression = ellipse(27902.198792, 28453.138611, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 14:48:13 2012] Writing source region out to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src61_src.reg
[Fri Jan 27 14:48:13 2012] Extracting stamp from image fullrun_pn_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (284, 290) - (359, 365)
[Fri Jan 27 14:48:13 2012] XMMSAS bgd. selection expression = annulus(27902.198792, 28453.138611, 1087.500000, 2175.000000, X, Y) && !ellipse(26614.855800, 26373.068600, 509.527215, 509.527215, 0.000000, X, Y) && !ellipse(28831.611540, 27188.053600, 1403.232040, 1403.232040, 0.000000, X, Y) && !ellipse(27529.112830, 27353.546400, 641.577618, 641.577618, 0.000000, X, Y) && !ellipse(27216.654000, 27492.409600, 3479.952100, 3479.952100, 0.000000, X, Y) && !ellipse(25688.905120, 26705.096800, 401.221612, 401.221612, 0.000000, X, Y) && !ellipse(28466.415800, 30411.310000, 465.511213, 465.511213, 0.000000, X, Y) && !ellipse(26424.466600, 29802.072000, 348.545610, 348.545610, 0.000000, X, Y) && !ellipse(25762.238600, 28116.716600, 862.408025, 862.408025, 0.000000, X, Y) && !ellipse(27392.385376, 26408.290802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.684000, 26908.178000, 699.535220, 699.535220, 0.000000, X, Y) && !ellipse(25032.096191, 30242.392059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26481.590851, 29103.920807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24898.630524, 27197.848724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.378160, 31360.988000, 1363.672039, 1363.672039, 0.000000, X, Y) && !ellipse(27038.878200, 30380.914000, 2669.904077, 2669.904077, 0.000000, X, Y) && !ellipse(27240.028000, 29307.488000, 1318.024038, 1318.024038, 0.000000, X, Y) && !ellipse(27976.310000, 29129.136000, 1184.992034, 1184.992034, 0.000000, X, Y) && !ellipse(29015.370270, 29691.571716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24783.050000, 29575.013400, 1291.104037, 1291.104037, 0.000000, X, Y) && !ellipse(28878.379400, 28204.672000, 1292.512037, 1292.512037, 0.000000, X, Y) && !ellipse(24705.569600, 28328.292000, 2582.136074, 2582.136074, 0.000000, X, Y) && !ellipse(29139.556610, 28101.939301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25042.039276, 27794.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26572.792000, 25215.040000, 1112.408032, 1112.408032, 0.000000, X, Y) && !ellipse(31085.105600, 25540.328000, 1380.680040, 1380.680040, 0.000000, X, Y)
[Fri Jan 27 14:48:13 2012] Writing fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src61.gif
[Fri Jan 27 16:28:48 2012] Mean detx,y = (28.45, -1433.98) 
[Fri Jan 27 16:28:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 16:29:10 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 16:29:11 2012] Setting source spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Fri Jan 27 16:29:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sat Jan 28 01:54:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 01:54:13 2012] rmf not generated due to insufficient counts
[Sat Jan 28 11:06:24 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:25 2012] Error reading totcts from fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Jan 28 11:06:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:31 2012] Using photon index=1.80, rate=0.0345, arf fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src61.arf
[Sat Jan 28 11:06:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:31 2012] Updating source flux to 9e-14
[Sat Jan 28 11:20:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting