[Thu Jan 26 16:06:17 2012] Detection parameters:
  Position = (383.8, 285.1) = 0 42 18.59 41 14 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3281.3 +/- 70.7
  Background counts = 74.9
  Rate = 0.2 +/- 0.004

[Thu Jan 26 16:06:21 2012] Off-axis axis estimate = 6.26'
[Thu Jan 26 16:11:23 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 16:11:23 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Thu Jan 26 16:11:23 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.031
[Thu Jan 26 16:11:23 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 9.56"
[Thu Jan 26 21:18:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src36.ximg exists
[Thu Jan 26 21:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src36.csv
[Thu Jan 26 21:18:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu Jan 26 21:18:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src36.csv
[Thu Jan 26 21:18:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 21:18:36 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu Jan 26 21:18:36 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu Jan 26 21:18:36 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Fri Jan 27 04:11:11 2012] Warning, spatial fit 36 centroid is now closest to src. 37
[Fri Jan 27 04:11:11 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:11 2012] Assessing source extent using major
[Fri Jan 27 04:11:11 2012] Source does appear to be extended
[Fri Jan 27 04:11:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 04:12:11 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 04:12:11 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Fri Jan 27 04:12:11 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.031
[Fri Jan 27 04:12:11 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 9.56"
[Fri Jan 27 08:16:33 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src33.ximg exists
[Fri Jan 27 08:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src33.csv
[Fri Jan 27 08:16:33 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri Jan 27 08:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src33.csv
[Fri Jan 27 08:16:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 08:16:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri Jan 27 08:16:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Jan 27 08:16:35 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Fri Jan 27 14:47:14 2012] Spatial fit model total counts = 5047.620000, observed total counts = 5041.000000
[Fri Jan 27 14:47:14 2012] Offset between fit and detection position for source 41 = 0.089152 pixels
[Fri Jan 27 14:47:14 2012] 4906.190000 total counts/ 2782.740000 bgd. counts: snr = 40.253692
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.089152 pixels
  Position = (383.7, 285.2) = 0 42 18.60 41 14 2.2
  Extent = 5.2 (5.0-5.3)", rotation angle = 0
  Source counts = 2123.4 +/- 70.0
  Background counts = 2782.7
  Rate = 0.08 +/- 0.003
[Fri Jan 27 14:47:14 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:14 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 14:47:14 2012] Source does appear to be extended
[Fri Jan 27 14:47:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 14:48:12 2012] Counts = 2123.450000, rescaling region sizes by 2.000000
[Fri Jan 27 14:48:12 2012] XMMSAS src. selection expression = ellipse(33335.167200, 24761.022200, 618.632418, 618.632418, 0.000000, X, Y)
[Fri Jan 27 14:48:12 2012] Writing source region out to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src41_src.reg
[Fri Jan 27 14:48:12 2012] Extracting stamp from image fullrun_pn_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (348, 250) - (419, 321)
[Fri Jan 27 14:48:12 2012] XMMSAS bgd. selection expression = annulus(33335.167200, 24761.022200, 2062.108059, 4124.216119, X, Y) && !ellipse(28831.611540, 27188.053600, 1403.232040, 1403.232040, 0.000000, X, Y) && !ellipse(27216.654000, 27492.409600, 3479.952100, 3479.952100, 0.000000, X, Y) && !ellipse(33402.769012, 22816.389282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30497.330000, 27552.282000, 257.652007, 257.652007, 0.000000, X, Y) && !ellipse(32684.219000, 27132.373200, 452.773613, 452.773613, 0.000000, X, Y) && !ellipse(32357.648590, 26174.778320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33706.376923, 25995.736420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31856.769348, 24288.170258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32482.825340, 24185.513600, 351.466410, 351.466410, 0.000000, X, Y) && !ellipse(30283.744141, 23769.406738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31126.577881, 22823.722473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31179.920074, 19934.455872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35400.190000, 29230.738000, 347.137610, 347.137610, 0.000000, X, Y) && !ellipse(32175.678192, 26445.100128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29197.813340, 25280.268400, 327.219209, 293.770408, 359.313691, X, Y) && !ellipse(32316.190472, 24879.487200, 336.096810, 336.096810, 0.000000, X, Y) && !ellipse(34884.482452, 20896.712830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27038.878200, 30380.914000, 2669.904077, 2669.904077, 0.000000, X, Y) && !ellipse(29015.370270, 29691.571716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28878.379400, 28204.672000, 1292.512037, 1292.512037, 0.000000, X, Y) && !ellipse(34845.742920, 28069.707245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29139.556610, 28101.939301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31085.105600, 25540.328000, 1380.680040, 1380.680040, 0.000000, X, Y) && !ellipse(29320.985382, 24597.807739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35851.457397, 20485.639954, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 14:48:12 2012] Writing fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src41.gif
[Fri Jan 27 15:55:56 2012] Mean detx,y = (6377.21, 543.17) 
[Fri Jan 27 15:56:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 15:57:09 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 15:57:09 2012] Setting source spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Fri Jan 27 15:57:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Sat Jan 28 11:06:23 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:23 2012] Error reading totcts from fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat Jan 28 11:06:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:30 2012] Using photon index=1.80, rate=0.0827, arf fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src41.arf
[Sat Jan 28 11:06:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:30 2012] Updating source flux to 2.6e-13