[Thu Jan 26 16:06:15 2012] Detection parameters:
  Position = (317.2, 314.2) = 0 42 44.23 41 16 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10861.5 +/- 127.4
  Background counts = 144.3
  Rate = 0.5 +/- 0.006

[Thu Jan 26 16:06:21 2012] Off-axis axis estimate = 1.78'
[Thu Jan 26 16:11:23 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 16:11:23 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Thu Jan 26 16:11:23 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Thu Jan 26 16:11:23 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.32"
[Thu Jan 26 21:18:34 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jan 26 21:18:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src4.csv
[Thu Jan 26 21:18:34 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jan 26 21:18:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src4.csv
[Thu Jan 26 21:18:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 21:18:36 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jan 26 21:18:36 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jan 26 21:18:36 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jan 27 04:11:11 2012] Spatial fit model total counts = 30280.100000, observed total counts = 30327.000000
[Fri Jan 27 04:11:11 2012] Offset between fit and detection position for source 4 = 0.800820 pixels
[Fri Jan 27 04:11:11 2012] 29733.440000 total counts/ 23418.400000 bgd. counts: snr = 41.266487
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.800820 pixels
  Position = (317.0, 315.0) = 0 42 44.33 41 16 12.1
  Extent = 8.0 (7.7-8.4)", rotation angle = 0
  Source counts = 6315.0 +/- 172.4
  Background counts = 23418.4
  Rate = 0.2 +/- 0.007
[Fri Jan 27 04:11:11 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:11 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 04:11:11 2012] Source does appear to be extended
[Fri Jan 27 04:11:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 04:11:11 2012] Source is confused with source 5
[Fri Jan 27 04:12:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan 27 04:12:11 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Fri Jan 27 04:12:11 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.728
[Fri Jan 27 04:12:11 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.02"
[Fri Jan 27 08:16:33 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jan 27 08:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src4.csv
[Fri Jan 27 08:16:33 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jan 27 08:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src4.csv
[Fri Jan 27 08:16:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 08:16:34 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jan 27 08:16:34 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jan 27 08:16:34 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jan 27 14:47:14 2012] Warning, spatial fit 4 centroid is now closest to src. 5
[Fri Jan 27 14:47:14 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:14 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 14:47:14 2012] Source does appear to be extended
[Fri Jan 27 14:47:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 14:48:10 2012] Counts = 6315.040000, rescaling region sizes by 2.000000
[Fri Jan 27 14:48:10 2012] XMMSAS src. selection expression = ellipse(27529.112830, 27353.546400, 962.366428, 962.366428, 0.000000, X, Y)
[Fri Jan 27 14:48:10 2012] Writing source region out to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src4_src.reg
[Fri Jan 27 14:48:10 2012] Extracting stamp from image fullrun_pn_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (262, 260) - (372, 370)
[Fri Jan 27 14:48:10 2012] XMMSAS bgd. selection expression = annulus(27529.112830, 27353.546400, 3207.888092, 6415.776185, X, Y) && !ellipse(26614.855800, 26373.068600, 509.527215, 509.527215, 0.000000, X, Y) && !ellipse(28831.611540, 27188.053600, 1403.232040, 1403.232040, 0.000000, X, Y) && !ellipse(21608.494120, 25738.924800, 442.258413, 442.258413, 0.000000, X, Y) && !ellipse(27216.654000, 27492.409600, 3479.952100, 3479.952100, 0.000000, X, Y) && !ellipse(25688.905120, 26705.096800, 401.221612, 401.221612, 0.000000, X, Y) && !ellipse(33402.769012, 22816.389282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30497.330000, 27552.282000, 257.652007, 257.652007, 0.000000, X, Y) && !ellipse(23257.190520, 33540.731200, 440.267213, 440.267213, 0.000000, X, Y) && !ellipse(29580.878235, 31962.420929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31750.002655, 31097.112366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30474.515860, 31486.785600, 428.394412, 428.394412, 0.000000, X, Y) && !ellipse(24081.838400, 31095.516800, 434.272812, 434.272812, 0.000000, X, Y) && !ellipse(28466.415800, 30411.310000, 465.511213, 465.511213, 0.000000, X, Y) && !ellipse(26424.466600, 29802.072000, 348.545610, 348.545610, 0.000000, X, Y) && !ellipse(23146.630600, 29641.280800, 359.709610, 359.709610, 0.000000, X, Y) && !ellipse(25762.238600, 28116.716600, 862.408025, 862.408025, 0.000000, X, Y) && !ellipse(32684.219000, 27132.373200, 452.773613, 452.773613, 0.000000, X, Y) && !ellipse(24037.136141, 27229.564016, 424.067199, 386.531649, 99.330276, X, Y) && !ellipse(24395.510000, 26505.068000, 476.514414, 476.514414, 0.000000, X, Y) && !ellipse(32357.648590, 26174.778320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27392.385376, 26408.290802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.684000, 26908.178000, 699.535220, 699.535220, 0.000000, X, Y) && !ellipse(33706.376923, 25995.736420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23359.148956, 26314.406311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28006.725000, 25594.291000, 460.752013, 460.752013, 0.000000, X, Y) && !ellipse(28629.509600, 25282.344400, 378.905611, 378.905611, 0.000000, X, Y) && !ellipse(33335.167200, 24761.022200, 412.421612, 412.421612, 0.000000, X, Y) && !ellipse(31856.769348, 24288.170258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32482.825340, 24185.513600, 351.466410, 351.466410, 0.000000, X, Y) && !ellipse(28366.624600, 24062.772600, 397.008811, 397.008811, 0.000000, X, Y) && !ellipse(30283.744141, 23769.406738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31126.577881, 22823.722473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27424.224560, 21875.066800, 410.060812, 410.060812, 0.000000, X, Y) && !ellipse(24469.685800, 21199.577000, 447.541613, 447.541613, 0.000000, X, Y) && !ellipse(22264.144800, 32303.283600, 386.081611, 386.081611, 0.000000, X, Y) && !ellipse(25032.096191, 30242.392059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26481.590851, 29103.920807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.198792, 28453.138611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24898.630524, 27197.848724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32175.678192, 26445.100128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29197.813340, 25280.268400, 327.219209, 293.770408, 359.313691, X, Y) && !ellipse(32316.190472, 24879.487200, 336.096810, 336.096810, 0.000000, X, Y) && !ellipse(27373.285095, 24857.740417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22015.729000, 23288.660800, 358.912810, 358.912810, 0.000000, X, Y) && !ellipse(23237.976074, 20188.096130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.055900, 33213.789000, 384.420011, 384.420011, 0.000000, X, Y) && !ellipse(23388.872009, 32765.901825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34054.987579, 32552.084351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22516.150867, 31015.876694, 443.664195, 365.012487, 79.465075, X, Y) && !ellipse(26932.378160, 31360.988000, 1363.672039, 1363.672039, 0.000000, X, Y) && !ellipse(27038.878200, 30380.914000, 2669.904077, 2669.904077, 0.000000, X, Y) && !ellipse(27240.028000, 29307.488000, 1318.024038, 1318.024038, 0.000000, X, Y) && !ellipse(27976.310000, 29129.136000, 1184.992034, 1184.992034, 0.000000, X, Y) && !ellipse(29015.370270, 29691.571716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24783.050000, 29575.013400, 1291.104037, 1291.104037, 0.000000, X, Y) && !ellipse(28878.379400, 28204.672000, 1292.512037, 1292.512037, 0.000000, X, Y) && !ellipse(24705.569600, 28328.292000, 2582.136074, 2582.136074, 0.000000, X, Y) && !ellipse(29139.556610, 28101.939301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25042.039276, 27794.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23078.549530, 27109.754852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23116.110229, 26501.296478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26572.792000, 25215.040000, 1112.408032, 1112.408032, 0.000000, X, Y) && !ellipse(31085.105600, 25540.328000, 1380.680040, 1380.680040, 0.000000, X, Y) && !ellipse(26122.638855, 24675.111572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29320.985382, 24597.807739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25692.300000, 24996.300000, 1066.400031, 1066.400031, 0.000000, X, Y) && !ellipse(23750.004200, 24528.512000, 469.731492, 469.731492, 0.000000, X, Y) && !ellipse(25872.230240, 23564.579800, 367.350411, 367.350411, 0.000000, X, Y) && !ellipse(26867.395813, 22196.705444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20496.504333, 21634.532196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28377.602000, 20575.486200, 418.594412, 418.594412, 0.000000, X, Y)
[Fri Jan 27 14:48:10 2012] Writing fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src4.gif
[Fri Jan 27 14:56:02 2012] Mean detx,y = (26.64, -293.76) 
[Fri Jan 27 14:56:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 14:57:28 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 14:57:28 2012] Setting source spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jan 27 14:57:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jan 28 11:06:21 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:21 2012] Error reading totcts from fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jan 28 11:06:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:28 2012] Using photon index=1.80, rate=0.246, arf fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src4.arf
[Sat Jan 28 11:06:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:28 2012] Updating source flux to 5.6e-13
[Sat Jan 28 11:20:54 2012] Flag c found in src. 4 procflags, skipping spectral fitting