[Thu Jan 26 16:06:20 2012] Detection parameters:
  Position = (309.4, 255.7) = 0 42 47.27 41 11 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.3 +/- 25.5
  Background counts = 101.0
  Rate = 0.01 +/- 0.001

[Thu Jan 26 16:06:21 2012] Off-axis axis estimate = 3.20'
[Thu Jan 26 16:11:23 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 16:11:23 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Thu Jan 26 16:11:23 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.136
[Thu Jan 26 16:11:23 2012] Giving source the simple spatial ID 115 for pass 0, mean size = 8.03"
[Fri Jan 27 04:11:11 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:11 2012] Assessing source extent using major
[Fri Jan 27 04:11:11 2012] Source does appear to be extended
[Fri Jan 27 04:11:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 04:11:11 2012] Source is confused with source 48
[Fri Jan 27 04:12:12 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 04:12:12 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Fri Jan 27 04:12:12 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.136
[Fri Jan 27 04:12:12 2012] Giving source the simple spatial ID 93 for pass 1, mean size = 8.03"
[Fri Jan 27 08:16:34 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src93.ximg exists
[Fri Jan 27 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src93.csv
[Fri Jan 27 08:16:34 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src93_1.ximg exists
[Fri Jan 27 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src93.csv
[Fri Jan 27 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src93_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 08:16:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Fri Jan 27 08:16:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src93.csv
[Fri Jan 27 08:16:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Fri Jan 27 08:16:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src93.csv
[Fri Jan 27 08:16:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src93_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 14:47:14 2012] Source 128 is offset by -6.275267 and 3.686844 pixels which is larger than
2 X fitted extent = 1.516009 x 1.516009, not incorporating fit results
[Fri Jan 27 14:47:14 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:14 2012] Assessing source extent using major
[Fri Jan 27 14:47:14 2012] Source does appear to be extended
[Fri Jan 27 14:47:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 14:48:15 2012] XMMSAS src. selection expression = ellipse(26867.395813, 22196.705444, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 14:48:15 2012] Writing source region out to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src128_src.reg
[Fri Jan 27 14:48:15 2012] Extracting stamp from image fullrun_pn_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (272, 218) - (347, 293)
[Fri Jan 27 14:48:15 2012] XMMSAS bgd. selection expression = annulus(26867.395813, 22196.705444, 1087.500000, 2175.000000, X, Y) && !ellipse(27216.654000, 27492.409600, 3479.952100, 3479.952100, 0.000000, X, Y) && !ellipse(28366.624600, 24062.772600, 397.008811, 397.008811, 0.000000, X, Y) && !ellipse(27424.224560, 21875.066800, 410.060812, 410.060812, 0.000000, X, Y) && !ellipse(24469.685800, 21199.577000, 447.541613, 447.541613, 0.000000, X, Y) && !ellipse(27373.285095, 24857.740417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26572.792000, 25215.040000, 1112.408032, 1112.408032, 0.000000, X, Y) && !ellipse(26122.638855, 24675.111572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29320.985382, 24597.807739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25692.300000, 24996.300000, 1066.400031, 1066.400031, 0.000000, X, Y) && !ellipse(25872.230240, 23564.579800, 367.350411, 367.350411, 0.000000, X, Y) && !ellipse(28377.602000, 20575.486200, 418.594412, 418.594412, 0.000000, X, Y)
[Fri Jan 27 14:48:15 2012] Writing fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src128.gif
[Fri Jan 27 17:32:53 2012] Mean detx,y = (1203.64, 4836.16) 
[Fri Jan 27 17:32:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 17:33:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 17:33:11 2012] Setting source spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src128_src_b10.pi.gz
[Fri Jan 27 17:33:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src128_bgd.pi.gz
[Sat Jan 28 04:58:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 04:58:07 2012] rmf not generated due to insufficient counts
[Sat Jan 28 11:06:27 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:27 2012] Error reading totcts from fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src128_src_b10.pi.gz
[Sat Jan 28 11:06:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:34 2012] Using photon index=1.80, rate=0.0122, arf fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src128.arf
[Sat Jan 28 11:06:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:34 2012] Updating source flux to 3.7e-14
[Sat Jan 28 11:20:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting