[Thu Jan 26 16:06:20 2012] Detection parameters:
  Position = (265.8, 312.2) = 0 43 4.07 41 16 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.3 +/- 23.3
  Background counts = 102.0
  Rate = 0.01 +/- 0.001

[Thu Jan 26 16:06:21 2012] Off-axis axis estimate = 2.57'
[Thu Jan 26 16:11:23 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 16:11:23 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Thu Jan 26 16:11:23 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.726
[Thu Jan 26 16:11:23 2012] Giving source the simple spatial ID 96 for pass 0, mean size = 7.71"
[Thu Jan 26 21:18:36 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src96.ximg exists
[Thu Jan 26 21:18:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src96.csv
[Thu Jan 26 21:18:36 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src96_1.ximg exists
[Thu Jan 26 21:18:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src96.csv
[Thu Jan 26 21:18:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 21:18:37 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Thu Jan 26 21:18:37 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Thu Jan 26 21:18:37 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src96 appears to have run properly
[Fri Jan 27 04:11:11 2012] Warning, spatial fit 96 centroid is now closest to src. 38
[Fri Jan 27 04:11:11 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:11 2012] Assessing source extent using major
[Fri Jan 27 04:11:11 2012] Source does appear to be extended
[Fri Jan 27 04:11:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 04:11:12 2012] Source is confused with source 111
[Fri Jan 27 04:12:12 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 04:12:12 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Fri Jan 27 04:12:12 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.726
[Fri Jan 27 04:12:12 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 7.71"
[Fri Jan 27 08:16:34 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src83.ximg exists
[Fri Jan 27 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src83.csv
[Fri Jan 27 08:16:34 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src83_1.ximg exists
[Fri Jan 27 08:16:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src83.csv
[Fri Jan 27 08:16:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 08:16:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Fri Jan 27 08:16:35 2012] fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Fri Jan 27 08:16:35 2012] Fit fullrun_pn_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Fri Jan 27 14:47:14 2012] Source 108 is offset by -6.275339 and -2.732657 pixels which is larger than
2 X fitted extent = 1.112064 x 1.112064, not incorporating fit results
[Fri Jan 27 14:47:14 2012] Source 108 is offset by 4.058385 and -7.533806 pixels which is larger than
2 X fitted extent = 7.090667 x 7.090667, not incorporating fit results
[Fri Jan 27 14:47:14 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:14 2012] Assessing source extent using major
[Fri Jan 27 14:47:14 2012] Source does appear to be extended
[Fri Jan 27 14:47:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 14:48:15 2012] XMMSAS src. selection expression = ellipse(23078.549530, 27109.754852, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 14:48:15 2012] Writing source region out to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src108_src.reg
[Fri Jan 27 14:48:15 2012] Extracting stamp from image fullrun_pn_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (228, 275) - (303, 350)
[Fri Jan 27 14:48:15 2012] XMMSAS bgd. selection expression = annulus(23078.549530, 27109.754852, 1087.500000, 2175.000000, X, Y) && !ellipse(21608.494120, 25738.924800, 442.258413, 442.258413, 0.000000, X, Y) && !ellipse(27216.654000, 27492.409600, 3479.952100, 3479.952100, 0.000000, X, Y) && !ellipse(23146.630600, 29641.280800, 359.709610, 359.709610, 0.000000, X, Y) && !ellipse(25762.238600, 28116.716600, 862.408025, 862.408025, 0.000000, X, Y) && !ellipse(24037.136141, 27229.564016, 424.067199, 386.531649, 99.330276, X, Y) && !ellipse(24395.510000, 26505.068000, 476.514414, 476.514414, 0.000000, X, Y) && !ellipse(23359.148956, 26314.406311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24898.630524, 27197.848724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27038.878200, 30380.914000, 2669.904077, 2669.904077, 0.000000, X, Y) && !ellipse(24783.050000, 29575.013400, 1291.104037, 1291.104037, 0.000000, X, Y) && !ellipse(24705.569600, 28328.292000, 2582.136074, 2582.136074, 0.000000, X, Y) && !ellipse(25042.039276, 27794.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23116.110229, 26501.296478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26122.638855, 24675.111572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25692.300000, 24996.300000, 1066.400031, 1066.400031, 0.000000, X, Y) && !ellipse(23750.004200, 24528.512000, 469.731492, 469.731492, 0.000000, X, Y)
[Fri Jan 27 14:48:15 2012] Writing fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src108.gif
[Fri Jan 27 17:25:25 2012] Mean detx,y = (-4080.76, 1200.54) 
[Fri Jan 27 17:25:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 17:25:44 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 17:25:44 2012] Setting source spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src108_src_b10.pi.gz
[Fri Jan 27 17:25:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src108_bgd.pi.gz
[Sat Jan 28 04:41:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 04:41:34 2012] rmf not generated due to insufficient counts
[Sat Jan 28 11:06:26 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:27 2012] Error reading totcts from fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src108_src_b10.pi.gz
[Sat Jan 28 11:06:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:33 2012] Using photon index=1.80, rate=0.0136, arf fullrun_pn_xmm0505720201_pi300-10000_pass1_cl_src108.arf
[Sat Jan 28 11:06:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:33 2012] Updating source flux to 4.3e-14
[Sat Jan 28 11:20:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting