[Thu Jan 26 16:08:10 2012] Detection parameters:
  Position = (346.8, 139.6) = 0 42 32.90 41 3 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.3 +/- 11.8
  Background counts = 9.9
  Rate = 0.003 +/- 0.0004

[Thu Jan 26 16:08:10 2012] Off-axis axis estimate = 12.03'
[Fri Jan 27 00:39:01 2012] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 00:39:01 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Fri Jan 27 00:39:01 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.084
[Fri Jan 27 00:39:01 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 12.45"
[Fri Jan 27 04:10:46 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src83.ximg exists
[Fri Jan 27 04:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src83.csv
[Fri Jan 27 04:10:46 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src83_1.ximg exists
[Fri Jan 27 04:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src83.csv
[Fri Jan 27 04:10:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 04:10:48 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Fri Jan 27 04:10:48 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Fri Jan 27 04:10:48 2012] Fit fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Fri Jan 27 04:11:48 2012] Warning: source 83 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 99 at 12.427863 pixels away
[Fri Jan 27 04:11:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:48 2012] Assessing source extent using major
[Fri Jan 27 04:11:48 2012] Source does appear to be extended
[Fri Jan 27 04:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 11:46:09 2012] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 11:46:09 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Fri Jan 27 11:46:09 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.084
[Fri Jan 27 11:46:09 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 12.45"
[Fri Jan 27 14:46:52 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src75.ximg exists
[Fri Jan 27 14:46:52 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src75_1.ximg exists
[Fri Jan 27 14:46:52 2012] Fit fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src75 appears to have run properly
[Fri Jan 27 14:46:53 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Fri Jan 27 14:46:53 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Fri Jan 27 14:46:53 2012] Fit fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly
[Fri Jan 27 14:47:45 2012] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 99 at 13.444201 pixels away
[Fri Jan 27 14:47:46 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:46 2012] Assessing source extent using major
[Fri Jan 27 14:47:46 2012] Source does appear to be extended
[Fri Jan 27 14:47:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:02:41 2012] XMMSAS src. selection expression = ellipse(30120.536835, 12099.897186, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 08:02:41 2012] Writing source region out to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src99_src.reg
[Sat Jan 28 08:02:41 2012] Extracting stamp from image fullrun_mos2_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (309, 102) - (384, 177)
[Sat Jan 28 08:02:41 2012] XMMSAS bgd. selection expression = annulus(30120.536835, 12099.897186, 1087.500000, 2175.000000, X, Y) && !ellipse(30981.546724, 13433.452090, 740.118421, 334.174365, 172.769825, X, Y)
[Sat Jan 28 08:02:41 2012] Writing fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src99.gif
[Sat Jan 28 08:30:33 2012] Mean detx,y = (-6732.61, -13707.63) 
[Sat Jan 28 08:30:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 08:30:43 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 08:30:43 2012] Setting source spectrum file to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Sat Jan 28 08:30:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Sat Jan 28 11:05:11 2012] Not generating rmf since there are only 80 counts
[Sat Jan 28 11:05:11 2012] rmf not generated due to insufficient counts
[Sat Jan 28 11:06:45 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:45 2012] Error reading totcts from fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Sat Jan 28 11:06:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:49 2012] Using photon index=1.80, rate=0.00295, arf fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src99.arf
[Sat Jan 28 11:06:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:49 2012] Updating source flux to 6.9e-14
[Sat Jan 28 11:15:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting