[Thu Jan 26 16:08:09 2012] Detection parameters:
  Position = (254.0, 268.1) = 0 43 8.63 41 12 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.6 +/- 17.7
  Background counts = 19.9
  Rate = 0.009 +/- 0.0008

[Thu Jan 26 16:08:10 2012] Off-axis axis estimate = 3.90'
[Fri Jan 27 00:39:01 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 00:39:01 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Fri Jan 27 00:39:01 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.679
[Fri Jan 27 00:39:01 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 8.38"
[Fri Jan 27 04:10:46 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src59.ximg exists
[Fri Jan 27 04:10:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src59.csv
[Fri Jan 27 04:10:46 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src59_1.ximg exists
[Fri Jan 27 04:10:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src59.csv
[Fri Jan 27 04:10:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 04:10:48 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Fri Jan 27 04:10:48 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Fri Jan 27 04:10:48 2012] Fit fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Fri Jan 27 04:11:48 2012] Spatial fit model total counts = 374.999000, observed total counts = 375.000000
[Fri Jan 27 04:11:48 2012] Offset between fit and detection position for source 67 = 0.112576 pixels
[Fri Jan 27 04:11:48 2012] 373.677000 total counts/ 260.106000 bgd. counts: snr = 7.041939
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 0.112576 pixels
  Position = (254.0, 268.2) = 0 43 8.63 41 12 48.4
  Extent = 3.9 (3.3-4.7)", rotation angle = 0
  Source counts = 113.6 +/- 19.3
  Background counts = 260.1
  Rate = 0.004 +/- 0.0007
[Fri Jan 27 04:11:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 04:11:48 2012] Source does appear to be extended
[Fri Jan 27 04:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 11:46:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan 27 11:46:09 2012] Initial guess for spatial extent in simple fitting = 3.91"
[Fri Jan 27 11:46:09 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.767
[Fri Jan 27 11:46:09 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 3.91"
[Fri Jan 27 14:46:51 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src57.ximg exists
[Fri Jan 27 14:46:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src57.csv
[Fri Jan 27 14:46:51 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src57_1.ximg exists
[Fri Jan 27 14:46:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src57.csv
[Fri Jan 27 14:46:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 14:46:53 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Fri Jan 27 14:46:53 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Fri Jan 27 14:46:53 2012] Fit fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Fri Jan 27 14:47:45 2012] Spatial fit model total counts = 374.999000, observed total counts = 375.000000
[Fri Jan 27 14:47:45 2012] Offset between fit and detection position for source 67 = 0.002771 pixels
[Fri Jan 27 14:47:45 2012] 373.674000 total counts/ 260.542000 bgd. counts: snr = 7.008847
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 0.002771 pixels
  Position = (254.0, 268.2) = 0 43 8.63 41 12 48.4
  Extent = 3.9 (3.3-4.7)", rotation angle = 0
  Source counts = 113.1 +/- 19.3
  Background counts = 260.5
  Rate = 0.004 +/- 0.0007
[Fri Jan 27 14:47:46 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:46 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 14:47:46 2012] Source does appear to be extended
[Fri Jan 27 14:47:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:02:41 2012] XMMSAS src. selection expression = ellipse(22048.013586, 23281.913600, 232.669207, 232.669207, 0.000000, X, Y)
[Sat Jan 28 08:02:41 2012] Writing source region out to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src67_src.reg
[Sat Jan 28 08:02:41 2012] Extracting stamp from image fullrun_mos2_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (241, 255) - (267, 282)
[Sat Jan 28 08:02:41 2012] XMMSAS bgd. selection expression = annulus(22048.013586, 23281.913600, 387.782011, 775.564022, X, Y)
[Sat Jan 28 08:02:41 2012] Writing fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src67.gif
[Sat Jan 28 08:25:37 2012] Mean detx,y = (4148.77, -5257.60) 
[Sat Jan 28 08:25:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 08:25:45 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 08:25:45 2012] Setting source spectrum file to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sat Jan 28 08:25:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Sat Jan 28 11:06:44 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:44 2012] Error reading totcts from fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sat Jan 28 11:06:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:49 2012] Using photon index=1.80, rate=0.00415, arf fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src67.arf
[Sat Jan 28 11:06:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:49 2012] Updating source flux to 8.5e-14