[Thu Jan 26 16:08:09 2012] Detection parameters:
  Position = (411.7, 154.9) = 0 42 7.93 41 4 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.4 +/- 14.9
  Background counts = 9.6
  Rate = 0.005 +/- 0.0005

[Thu Jan 26 16:08:10 2012] Off-axis axis estimate = 13.25'
[Fri Jan 27 00:39:01 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 00:39:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan 27 00:39:01 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Fri Jan 27 00:39:01 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Fri Jan 27 00:39:01 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 13.06"
[Fri Jan 27 04:10:46 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src67.ximg exists
[Fri Jan 27 04:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src67.csv
[Fri Jan 27 04:10:46 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src67_1.ximg exists
[Fri Jan 27 04:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src67.csv
[Fri Jan 27 04:10:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 04:10:48 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Fri Jan 27 04:10:48 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Fri Jan 27 04:10:48 2012] Fit fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Fri Jan 27 04:11:47 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 13.578914 pixels away
[Fri Jan 27 04:11:48 2012] Warning, spatial fit 67 centroid is now closest to src. 29
[Fri Jan 27 04:11:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:48 2012] Assessing source extent using major
[Fri Jan 27 04:11:48 2012] Source does appear to be extended
[Fri Jan 27 04:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 11:46:09 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 11:46:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan 27 11:46:09 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Fri Jan 27 11:46:09 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Fri Jan 27 11:46:09 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 13.06"
[Fri Jan 27 14:46:52 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src65.ximg exists
[Fri Jan 27 14:46:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src65.csv
[Fri Jan 27 14:46:52 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src65_1.ximg exists
[Fri Jan 27 14:46:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src65.csv
[Fri Jan 27 14:46:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 14:46:53 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Fri Jan 27 14:46:53 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Fri Jan 27 14:46:53 2012] Fit fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Fri Jan 27 14:47:45 2012] Source 55 is offset by 8.465803 and 1.717818 pixels which is larger than
2 X fitted extent = 2.255968 x 2.255968, not incorporating fit results
[Fri Jan 27 14:47:46 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:46 2012] Assessing source extent using major
[Fri Jan 27 14:47:46 2012] Source does appear to be extended
[Fri Jan 27 14:47:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:02:41 2012] XMMSAS src. selection expression = ellipse(35765.946869, 13429.918182, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 08:02:41 2012] Writing source region out to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src55_src.reg
[Sat Jan 28 08:02:41 2012] Extracting stamp from image fullrun_mos2_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (374, 117) - (449, 192)
[Sat Jan 28 08:02:41 2012] XMMSAS bgd. selection expression = annulus(35765.946869, 13429.918182, 1087.500000, 2175.000000, X, Y) && !ellipse(34998.546720, 13257.889000, 616.630418, 285.581608, 328.475000, X, Y) && !ellipse(35130.330200, 16043.369720, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 08:02:41 2012] Writing fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src55.gif
[Sat Jan 28 08:28:05 2012] Mean detx,y = (-11672.81, -10818.88) 
[Sat Jan 28 08:28:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 08:28:25 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 08:28:25 2012] Setting source spectrum file to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat Jan 28 08:28:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sat Jan 28 11:04:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 11:04:36 2012] rmf not generated due to insufficient counts
[Sat Jan 28 11:06:45 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:45 2012] Error reading totcts from fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat Jan 28 11:06:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:49 2012] Using photon index=1.80, rate=0.00486, arf fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src55.arf
[Sat Jan 28 11:06:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:49 2012] Updating source flux to 1.2e-13
[Sat Jan 28 11:15:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting