[Thu Jan 26 16:08:07 2012] Detection parameters:
  Position = (238.9, 192.9) = 0 43 14.40 41 7 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1621.3 +/- 48.0
  Background counts = 12.0
  Rate = 0.06 +/- 0.002

[Thu Jan 26 16:08:10 2012] Off-axis axis estimate = 8.78'
[Fri Jan 27 00:39:01 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 00:39:01 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Fri Jan 27 00:39:01 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.009
[Fri Jan 27 00:39:01 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.82"
[Fri Jan 27 04:10:45 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jan 27 04:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src13.csv
[Fri Jan 27 04:10:45 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jan 27 04:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src13.csv
[Fri Jan 27 04:10:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 04:10:47 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jan 27 04:10:47 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jan 27 04:10:47 2012] Fit fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jan 27 04:11:47 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.289986 pixels away
[Fri Jan 27 04:11:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:48 2012] Assessing source extent using major
[Fri Jan 27 04:11:48 2012] Source does appear to be extended
[Fri Jan 27 04:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 11:46:09 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 11:46:09 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Fri Jan 27 11:46:09 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.009
[Fri Jan 27 11:46:09 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 10.82"
[Fri Jan 27 14:46:51 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jan 27 14:46:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src13.csv
[Fri Jan 27 14:46:51 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jan 27 14:46:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src13.csv
[Fri Jan 27 14:46:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 14:46:52 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jan 27 14:46:52 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jan 27 14:46:52 2012] Fit fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jan 27 14:47:45 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.289986 pixels away
[Fri Jan 27 14:47:45 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:46 2012] Assessing source extent using major
[Fri Jan 27 14:47:46 2012] Source does appear to be extended
[Fri Jan 27 14:47:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:02:40 2012] Counts = 1621.315552, rescaling region sizes by 2.000000
[Sat Jan 28 08:02:40 2012] XMMSAS src. selection expression = ellipse(20738.544769, 16737.251007, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jan 28 08:02:40 2012] Writing source region out to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src4_src.reg
[Sat Jan 28 08:02:40 2012] Extracting stamp from image fullrun_mos2_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (164, 118) - (314, 268)
[Sat Jan 28 08:02:40 2012] XMMSAS bgd. selection expression = annulus(20738.544769, 16737.251007, 4350.000000, 8700.000000, X, Y) && !ellipse(26654.214000, 25978.070000, 869.512025, 869.512025, 0.000000, X, Y) && !ellipse(21603.891626, 25742.039153, 437.700388, 369.609468, 77.368403, X, Y) && !ellipse(27420.469200, 21871.767400, 360.024810, 360.024810, 0.000000, X, Y) && !ellipse(15598.079660, 25564.115000, 650.800819, 455.625613, 76.853759, X, Y) && !ellipse(28034.058285, 25557.889479, 570.608242, 288.095190, 45.381415, X, Y) && !ellipse(17400.458740, 17281.530685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16707.655396, 20748.506439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28352.489105, 24059.163361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24473.748840, 21430.296722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28614.437000, 25266.944600, 282.228808, 282.228808, 0.000000, X, Y) && !ellipse(16235.903420, 23983.919400, 496.397614, 496.397614, 0.000000, X, Y) && !ellipse(27365.086365, 24873.582977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22048.013586, 23281.913600, 310.225609, 310.225609, 0.000000, X, Y) && !ellipse(23286.627720, 20207.632800, 499.944814, 351.260810, 12.671600, X, Y) && !ellipse(26871.049133, 22186.062759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28395.400200, 20555.012980, 542.989240, 542.989240, 0.000000, X, Y) && !ellipse(29186.946228, 25278.713898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30120.536835, 12099.897186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26283.931885, 25393.966064, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 08:02:40 2012] Writing fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src4.gif
[Sat Jan 28 08:08:57 2012] Mean detx,y = (3542.73, -11901.82) 
[Sat Jan 28 08:08:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 08:11:35 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 08:11:35 2012] Setting source spectrum file to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jan 28 08:11:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jan 28 09:20:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 09:20:25 2012] rmf not generated due to insufficient counts
[Sat Jan 28 11:06:42 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:42 2012] Error reading totcts from fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jan 28 11:06:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:46 2012] Using photon index=1.80, rate=0.0595, arf fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src4.arf
[Sat Jan 28 11:06:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:46 2012] Updating source flux to 1.1e-12
[Sat Jan 28 11:15:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting