[Thu Jan 26 16:08:07 2012] Detection parameters:
  Position = (358.8, 262.1) = 0 42 28.23 41 12 22.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1788.0 +/- 51.9
  Background counts = 33.7
  Rate = 0.08 +/- 0.002

[Thu Jan 26 16:08:10 2012] Off-axis axis estimate = 5.10'
[Fri Jan 27 00:39:01 2012] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 00:39:01 2012] Initial guess for spatial extent in simple fitting = 8.98"
[Fri Jan 27 00:39:01 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.950
[Fri Jan 27 00:39:01 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.98"
[Fri Jan 27 04:10:45 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src10.ximg exists
[Fri Jan 27 04:10:45 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Jan 27 04:10:45 2012] Fit fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_src10 appears to have run properly
[Fri Jan 27 04:10:47 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Jan 27 04:10:47 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Jan 27 04:10:47 2012] Fit fullrun_mos2_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Jan 27 04:11:47 2012] Spatial fit model total counts = 1872.990000, observed total counts = 1875.000000
[Fri Jan 27 04:11:47 2012] Offset between fit and detection position for source 10 = 0.125522 pixels
[Fri Jan 27 04:11:47 2012] 1888.578000 total counts/ 694.698000 bgd. counts: snr = 45.296292
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.125522 pixels
  Position = (358.7, 262.2) = 0 42 28.27 41 12 22.6
  Extent = 5.0 (4.7-5.2)", rotation angle = 0
  Source counts = 1193.9 +/- 43.5
  Background counts = 694.7
  Rate = 0.04 +/- 0.002
[Fri Jan 27 04:11:48 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:48 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 04:11:48 2012] Source does appear to be extended
[Fri Jan 27 04:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 11:46:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan 27 11:46:09 2012] Initial guess for spatial extent in simple fitting = 4.97"
[Fri Jan 27 11:46:09 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.835
[Fri Jan 27 11:46:09 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 4.97"
[Fri Jan 27 14:46:51 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src10.ximg exists
[Fri Jan 27 14:46:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src10.csv
[Fri Jan 27 14:46:51 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Jan 27 14:46:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src10.csv
[Fri Jan 27 14:46:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 14:46:52 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Jan 27 14:46:52 2012] fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Jan 27 14:46:52 2012] Fit fullrun_mos2_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Jan 27 14:47:45 2012] Spatial fit model total counts = 1870.440000, observed total counts = 1870.000000
[Fri Jan 27 14:47:45 2012] Offset between fit and detection position for source 10 = 0.007497 pixels
[Fri Jan 27 14:47:45 2012] 1879.645000 total counts/ 678.595000 bgd. counts: snr = 46.105821
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.007497 pixels
  Position = (358.7, 262.2) = 0 42 28.26 41 12 22.6
  Extent = 5.0 (4.7-5.2)", rotation angle = 0
  Source counts = 1201.0 +/- 43.4
  Background counts = 678.6
  Rate = 0.04 +/- 0.002
[Fri Jan 27 14:47:45 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:45 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 14:47:45 2012] Source does appear to be extended
[Fri Jan 27 14:47:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 08:02:39 2012] Counts = 1201.050000, rescaling region sizes by 2.000000
[Sat Jan 28 08:02:39 2012] XMMSAS src. selection expression = ellipse(31157.881400, 22765.768600, 599.314817, 599.314817, 0.000000, X, Y)
[Sat Jan 28 08:02:39 2012] Writing source region out to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src10_src.reg
[Sat Jan 28 08:02:39 2012] Extracting stamp from image fullrun_mos2_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (324, 228) - (393, 297)
[Sat Jan 28 08:02:39 2012] XMMSAS bgd. selection expression = annulus(31157.881400, 22765.768600, 1997.716057, 3995.432115, X, Y) && !ellipse(28830.869600, 27180.551200, 419.944012, 419.944012, 0.000000, X, Y) && !ellipse(26654.214000, 25978.070000, 869.512025, 869.512025, 0.000000, X, Y) && !ellipse(32368.218456, 26608.554846, 367.250044, 338.758689, 237.502819, X, Y) && !ellipse(33421.141815, 22945.954712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27420.469200, 21871.767400, 360.024810, 360.024810, 0.000000, X, Y) && !ellipse(33343.543274, 24747.341644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30287.447600, 23779.876200, 436.823213, 436.823213, 0.000000, X, Y) && !ellipse(31171.793030, 19902.133545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28034.058285, 25557.889479, 570.608242, 288.095190, 45.381415, X, Y) && !ellipse(32474.155380, 24189.565000, 345.691210, 345.691210, 0.000000, X, Y) && !ellipse(28352.489105, 24059.163361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28614.437000, 25266.944600, 282.228808, 282.228808, 0.000000, X, Y) && !ellipse(33669.036000, 26070.090800, 424.018412, 424.018412, 0.000000, X, Y) && !ellipse(31877.428131, 24302.244568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29893.834503, 27519.964844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34892.322600, 20902.053200, 305.108009, 305.108009, 0.000000, X, Y) && !ellipse(32295.917800, 24861.808600, 215.864806, 215.864806, 0.000000, X, Y) && !ellipse(27365.086365, 24873.582977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34140.999908, 23012.197693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26871.049133, 22186.062759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28395.400200, 20555.012980, 542.989240, 542.989240, 0.000000, X, Y) && !ellipse(29186.946228, 25278.713898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30193.945740, 26490.989655, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 08:02:39 2012] Writing fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src10.gif
[Sat Jan 28 08:05:25 2012] Mean detx,y = (-4720.36, -3147.89) 
[Sat Jan 28 08:05:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 08:05:55 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 08:05:55 2012] Setting source spectrum file to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jan 28 08:05:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jan 28 11:06:42 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:42 2012] Error reading totcts from fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jan 28 11:06:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:46 2012] Using photon index=1.80, rate=0.0441, arf fullrun_mos2_xmm0505720201_pi300-10000_pass1_cl_src10.arf
[Sat Jan 28 11:06:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:46 2012] Updating source flux to 5.5e-13