[Thu Jan 26 16:07:11 2012] Detection parameters:
  Position = (358.8, 228.4) = 0 42 28.22 41 9 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 543.3 +/- 30.0
  Background counts = 16.7
  Rate = 0.03 +/- 0.002

[Thu Jan 26 16:07:12 2012] Off-axis axis estimate = 6.70'
[Thu Jan 26 21:18:37 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:18:37 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Thu Jan 26 21:18:37 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.827
[Thu Jan 26 21:18:37 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 9.78"
[Fri Jan 27 00:38:59 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src25.ximg exists
[Fri Jan 27 00:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src25.csv
[Fri Jan 27 00:38:59 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Jan 27 00:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src25.csv
[Fri Jan 27 00:38:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:39:00 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Jan 27 00:39:00 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Jan 27 00:39:00 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Jan 27 04:11:29 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 92 at 13.272194 pixels away
[Fri Jan 27 04:11:30 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:30 2012] Assessing source extent using major
[Fri Jan 27 04:11:30 2012] Source does appear to be extended
[Fri Jan 27 04:11:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 08:16:36 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 08:16:36 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Fri Jan 27 08:16:36 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.827
[Fri Jan 27 08:16:36 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 9.78"
[Fri Jan 27 11:46:06 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src25.ximg exists
[Fri Jan 27 11:46:06 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src25.csv
[Fri Jan 27 11:46:06 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Jan 27 11:46:06 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src25.csv
[Fri Jan 27 11:46:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 11:46:08 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Jan 27 11:46:08 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Jan 27 11:46:08 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Jan 27 14:47:29 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 92 at 13.272194 pixels away
[Fri Jan 27 14:47:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:29 2012] Assessing source extent using major
[Fri Jan 27 14:47:29 2012] Source does appear to be extended
[Fri Jan 27 14:47:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 05:02:52 2012] XMMSAS src. selection expression = ellipse(31169.438019, 19821.982193, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 05:02:52 2012] Writing source region out to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src92_src.reg
[Sat Jan 28 05:02:52 2012] Extracting stamp from image fullrun_mos1_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (321, 191) - (396, 266)
[Sat Jan 28 05:02:52 2012] XMMSAS bgd. selection expression = annulus(31169.438019, 19821.982193, 1087.500000, 2175.000000, X, Y)
[Sat Jan 28 05:02:52 2012] Writing fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src92.gif
[Sat Jan 28 05:17:27 2012] Mean detx,y = (-5738.51, 5344.56) 
[Sat Jan 28 05:17:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:17:46 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:17:46 2012] Setting source spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Sat Jan 28 05:17:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Sat Jan 28 06:58:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 06:58:27 2012] rmf not generated due to insufficient counts
[Sat Jan 28 11:06:36 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:36 2012] Error reading totcts from fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Sat Jan 28 11:06:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:40 2012] Using photon index=1.80, rate=0.035, arf fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src92.arf
[Sat Jan 28 11:06:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:40 2012] Updating source flux to 4.5e-13
[Sat Jan 28 11:06:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting