[Thu Jan 26 16:07:10 2012] Detection parameters:
  Position = (266.0, 312.1) = 0 43 3.99 41 16 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.6 +/- 15.7
  Background counts = 33.5
  Rate = 0.004 +/- 0.0007

[Thu Jan 26 16:07:12 2012] Off-axis axis estimate = 2.55'
[Thu Jan 26 21:18:37 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:18:37 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Thu Jan 26 21:18:37 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.776
[Thu Jan 26 21:18:37 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 7.70"
[Fri Jan 27 00:38:59 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src68.ximg exists
[Fri Jan 27 00:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src68.csv
[Fri Jan 27 00:38:59 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src68_1.ximg exists
[Fri Jan 27 00:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src68.csv
[Fri Jan 27 00:38:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:39:01 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Fri Jan 27 00:39:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src68.csv
[Fri Jan 27 00:39:01 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Fri Jan 27 00:39:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src68.csv
[Fri Jan 27 00:39:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 04:11:29 2012] Source 69 is offset by -3.172149 and 4.881257 pixels which is larger than
2 X fitted extent = 2.214349 x 2.214349, not incorporating fit results
[Fri Jan 27 04:11:30 2012] Spatial fit model total counts = 1065.080000, observed total counts = 1355.000000
[Fri Jan 27 04:11:30 2012] Poor agreement between spatial fit and data for source 69
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jan 27 04:11:30 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:30 2012] Assessing source extent using major
[Fri Jan 27 04:11:30 2012] Source does appear to be extended
[Fri Jan 27 04:11:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 08:16:36 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 08:16:36 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Jan 27 08:16:36 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.776
[Fri Jan 27 08:16:36 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 7.70"
[Fri Jan 27 11:46:07 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src66.ximg exists
[Fri Jan 27 11:46:07 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src66_1.ximg exists
[Fri Jan 27 11:46:07 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src66 appears to have run properly
[Fri Jan 27 11:46:08 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Fri Jan 27 11:46:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src66.csv
[Fri Jan 27 11:46:08 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Fri Jan 27 11:46:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src66.csv
[Fri Jan 27 11:46:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 14:47:29 2012] Source 69 is offset by -2.205804 and 6.180981 pixels which is larger than
2 X fitted extent = 2.347099 x 2.161904, not incorporating fit results
[Fri Jan 27 14:47:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:29 2012] Assessing source extent using major
[Fri Jan 27 14:47:29 2012] Source does appear to be extended
[Fri Jan 27 14:47:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 05:02:53 2012] XMMSAS src. selection expression = ellipse(23097.363068, 27104.009369, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 05:02:53 2012] Writing source region out to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src69_src.reg
[Sat Jan 28 05:02:53 2012] Extracting stamp from image fullrun_mos1_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (229, 275) - (304, 350)
[Sat Jan 28 05:02:53 2012] XMMSAS bgd. selection expression = annulus(23097.363068, 27104.009369, 1087.500000, 2175.000000, X, Y) && !ellipse(21604.707660, 25737.521400, 422.620812, 422.620812, 0.000000, X, Y) && !ellipse(25142.626000, 27171.138000, 362.632810, 362.632810, 0.000000, X, Y) && !ellipse(23299.821000, 26428.107800, 485.322414, 422.778412, 64.456700, X, Y) && !ellipse(24029.636000, 27142.432000, 286.347208, 286.347208, 0.000000, X, Y) && !ellipse(23139.724400, 29600.117400, 396.023211, 396.023211, 0.000000, X, Y) && !ellipse(25616.028000, 28059.416000, 452.484813, 452.484813, 0.000000, X, Y) && !ellipse(24380.339600, 26490.756012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25334.313600, 30435.290000, 1285.576037, 1285.576037, 0.000000, X, Y) && !ellipse(24995.748840, 28588.983185, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 05:02:53 2012] Writing fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src69.gif
[Sat Jan 28 05:27:59 2012] Mean detx,y = (-1299.69, -4228.39) 
[Sat Jan 28 05:28:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:28:09 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:28:09 2012] Setting source spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Sat Jan 28 05:28:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Sat Jan 28 07:55:19 2012] Not generating rmf since there are only 98 counts
[Sat Jan 28 07:55:19 2012] rmf not generated due to insufficient counts
[Sat Jan 28 11:06:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:38 2012] Error reading totcts from fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Sat Jan 28 11:06:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:41 2012] Using photon index=1.80, rate=0.00449, arf fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src69.arf
[Sat Jan 28 11:06:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:41 2012] Updating source flux to 5.2e-14
[Sat Jan 28 11:06:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting