[Thu Jan 26 16:07:10 2012] Detection parameters:
  Position = (413.8, 331.7) = 0 42 6.97 41 17 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.4 +/- 9.3
  Background counts = 15.6
  Rate = 0.002 +/- 0.0005

[Thu Jan 26 16:07:12 2012] Off-axis axis estimate = 8.70'
[Thu Jan 26 21:18:37 2012] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:18:37 2012] Initial guess for spatial extent in simple fitting = 10.78"
[Thu Jan 26 21:18:37 2012] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.817
[Thu Jan 26 21:18:37 2012] Giving source the simple spatial ID 92 for pass 0, mean size = 10.78"
[Fri Jan 27 00:39:00 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src92.ximg exists
[Fri Jan 27 00:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src92.csv
[Fri Jan 27 00:39:00 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src92_1.ximg exists
[Fri Jan 27 00:39:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src92.csv
[Fri Jan 27 00:39:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:39:01 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Fri Jan 27 00:39:01 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Fri Jan 27 00:39:01 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src92 appears to have run properly
[Fri Jan 27 04:11:29 2012] Source 61 is offset by -8.206742 and -2.348800 pixels which is larger than
2 X fitted extent = 1.247830 x 1.247830, not incorporating fit results
[Fri Jan 27 04:11:30 2012] Spatial fit model total counts = 400.272000, observed total counts = 405.000000
[Fri Jan 27 04:11:30 2012] Offset between fit and detection position for source 61 = 9.432679 pixels
[Fri Jan 27 04:11:30 2012] 377.203000 total counts/ 164.561000 bgd. counts: snr = 16.576223
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 9.432679 pixels
  Position = (421.3, 326.0) = 0 42 4.07 41 16 59.5
  Extent = 21.6 (21.6-21.6)", rotation angle = 0
  Source counts = 212.6 +/- 19.4
  Background counts = 164.6
  Rate = 0.008 +/- 0.0007
[Fri Jan 27 04:11:30 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:30 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 04:11:30 2012] Source does appear to be extended
[Fri Jan 27 04:11:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 08:16:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan 27 08:16:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan 27 08:16:36 2012] Initial guess for spatial extent in simple fitting = 21.56"
[Fri Jan 27 08:16:36 2012] source mask rpix=5.0, npix_max = 119, mask sum = 100, frac = 0.840
[Fri Jan 27 08:16:36 2012] Giving source the simple spatial ID 78 for pass 1, mean size = 21.56"
[Fri Jan 27 11:46:07 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src78.ximg exists
[Fri Jan 27 11:46:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src78.csv
[Fri Jan 27 11:46:07 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src78_1.ximg exists
[Fri Jan 27 11:46:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src78.csv
[Fri Jan 27 11:46:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 11:46:09 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Fri Jan 27 11:46:09 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Fri Jan 27 11:46:09 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src78 appears to have run properly
[Fri Jan 27 14:47:29 2012] Warning, spatial fit 78 centroid is now closest to src. 59
[Fri Jan 27 14:47:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:29 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 14:47:29 2012] Source does appear to be extended
[Fri Jan 27 14:47:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 05:02:53 2012] XMMSAS src. selection expression = ellipse(36606.466000, 28314.214000, 1293.546037, 1293.546037, 0.000000, X, Y)
[Sat Jan 28 05:02:53 2012] Writing source region out to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src61_src.reg
[Sat Jan 28 05:02:53 2012] Extracting stamp from image fullrun_mos1_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (347, 252) - (496, 400)
[Sat Jan 28 05:02:53 2012] XMMSAS bgd. selection expression = annulus(36606.466000, 28314.214000, 2155.910062, 4311.820124, X, Y) && !ellipse(32359.033200, 26602.908000, 334.078410, 334.078410, 0.000000, X, Y) && !ellipse(35801.465851, 29811.817993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32683.598400, 27129.155600, 306.364009, 306.364009, 0.000000, X, Y) && !ellipse(33337.550873, 24752.033081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34557.817800, 30242.432600, 359.629610, 359.629610, 0.000000, X, Y) && !ellipse(34001.791412, 28729.471405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33660.134000, 26070.606600, 418.090412, 354.692810, 89.942000, X, Y) && !ellipse(31659.731659, 30999.834747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31866.818634, 24449.919952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35516.344600, 32860.964000, 392.268011, 392.268011, 0.000000, X, Y) && !ellipse(32298.363680, 24846.248000, 288.660008, 288.660008, 0.000000, X, Y) && !ellipse(35444.656000, 29597.016000, 1647.008047, 1647.008047, 0.000000, X, Y) && !ellipse(39453.988184, 25541.703444, 500.781513, 306.663060, 91.994185, X, Y) && !ellipse(34078.909393, 32568.473846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41728.882477, 31095.960083, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 05:02:53 2012] Writing fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src61.gif
[Sat Jan 28 05:29:58 2012] Mean detx,y = (3967.10, 8031.01) 
[Sat Jan 28 05:29:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:30:42 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:30:42 2012] Setting source spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Jan 28 05:30:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sat Jan 28 11:06:38 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:38 2012] Error reading totcts from fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Jan 28 11:06:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:41 2012] Using photon index=1.80, rate=0.00781, arf fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src61.arf
[Sat Jan 28 11:06:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:41 2012] Updating source flux to 9.3e-14
[Sat Jan 28 11:06:54 2012] Flag b found in src. 61 procflags, skipping spectral fitting