[Thu Jan 26 16:07:09 2012] Detection parameters:
  Position = (351.3, 362.3) = 0 42 31.09 41 19 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 658.6 +/- 31.8
  Background counts = 23.5
  Rate = 0.03 +/- 0.001

[Thu Jan 26 16:07:12 2012] Off-axis axis estimate = 6.01'
[Thu Jan 26 21:18:37 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:18:37 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Thu Jan 26 21:18:37 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.878
[Thu Jan 26 21:18:37 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.43"
[Fri Jan 27 00:38:59 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jan 27 00:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src27.csv
[Fri Jan 27 00:38:59 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jan 27 00:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src27.csv
[Fri Jan 27 00:38:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:39:00 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jan 27 00:39:00 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jan 27 00:39:00 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Jan 27 04:11:29 2012] Warning, spatial fit 27 centroid is now closest to src. 46
[Fri Jan 27 04:11:30 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:30 2012] Assessing source extent using major
[Fri Jan 27 04:11:30 2012] Source does appear to be extended
[Fri Jan 27 04:11:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 08:16:36 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 08:16:36 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Fri Jan 27 08:16:36 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.878
[Fri Jan 27 08:16:36 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 9.43"
[Fri Jan 27 11:46:06 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jan 27 11:46:06 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jan 27 11:46:06 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src27 appears to have run properly
[Fri Jan 27 11:46:08 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jan 27 11:46:08 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jan 27 11:46:08 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jan 27 14:47:29 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 11.943522 pixels away
[Fri Jan 27 14:47:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:29 2012] Assessing source extent using major
[Fri Jan 27 14:47:29 2012] Source does appear to be extended
[Fri Jan 27 14:47:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 05:02:52 2012] XMMSAS src. selection expression = ellipse(30511.152710, 31467.666840, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 05:02:52 2012] Writing source region out to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src44_src.reg
[Sat Jan 28 05:02:52 2012] Extracting stamp from image fullrun_mos1_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (314, 325) - (389, 400)
[Sat Jan 28 05:02:52 2012] XMMSAS bgd. selection expression = annulus(30511.152710, 31467.666840, 1087.500000, 2175.000000, X, Y) && !ellipse(28468.125200, 30395.346000, 324.337609, 324.337609, 0.000000, X, Y) && !ellipse(29585.990200, 32010.643200, 345.372810, 345.372810, 0.000000, X, Y) && !ellipse(31659.731659, 30999.834747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.533000, 33186.792000, 445.918413, 445.918413, 0.000000, X, Y) && !ellipse(28958.905762, 28913.826019, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 05:02:52 2012] Writing fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src44.gif
[Sat Jan 28 05:18:00 2012] Mean detx,y = (5194.89, 1467.94) 
[Sat Jan 28 05:18:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:18:14 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:18:14 2012] Setting source spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Jan 28 05:18:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Jan 28 06:58:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 06:58:33 2012] rmf not generated due to insufficient counts
[Sat Jan 28 11:06:36 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:36 2012] Error reading totcts from fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Jan 28 11:06:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:40 2012] Using photon index=1.80, rate=0.0288, arf fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src44.arf
[Sat Jan 28 11:06:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:40 2012] Updating source flux to 3.3e-13
[Sat Jan 28 11:06:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting