[Thu Jan 26 16:07:08 2012] Detection parameters:
  Position = (348.7, 273.9) = 0 42 32.10 41 13 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1144.7 +/- 42.1
  Background counts = 37.4
  Rate = 0.05 +/- 0.002

[Thu Jan 26 16:07:12 2012] Off-axis axis estimate = 4.06'
[Thu Jan 26 21:18:37 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:18:37 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Thu Jan 26 21:18:37 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.046
[Thu Jan 26 21:18:37 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.46"
[Fri Jan 27 00:38:59 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jan 27 00:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src23.csv
[Fri Jan 27 00:38:59 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jan 27 00:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src23.csv
[Fri Jan 27 00:38:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:39:00 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jan 27 00:39:00 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jan 27 00:39:00 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Jan 27 04:11:29 2012] Warning, spatial fit 23 centroid is now closest to src. 80
[Fri Jan 27 04:11:30 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:30 2012] Assessing source extent using major
[Fri Jan 27 04:11:30 2012] Source does appear to be extended
[Fri Jan 27 04:11:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 08:16:36 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 08:16:36 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Fri Jan 27 08:16:36 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.046
[Fri Jan 27 08:16:36 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 8.46"
[Fri Jan 27 11:46:06 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src23.ximg exists
[Fri Jan 27 11:46:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src23.csv
[Fri Jan 27 11:46:06 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Jan 27 11:46:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src23.csv
[Fri Jan 27 11:46:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 11:46:08 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Jan 27 11:46:08 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Jan 27 11:46:08 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Jan 27 14:47:29 2012] Spatial fit model total counts = 1483.080000, observed total counts = 1481.000000
[Fri Jan 27 14:47:29 2012] Offset between fit and detection position for source 24 = 0.126215 pixels
[Fri Jan 27 14:47:29 2012] 1483.380000 total counts/ 702.260000 bgd. counts: snr = 29.476017
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.126215 pixels
  Position = (348.6, 273.9) = 0 42 32.14 41 13 13.2
  Extent = 5.3 (4.9-5.6)", rotation angle = 0
  Source counts = 781.1 +/- 38.5
  Background counts = 702.3
  Rate = 0.03 +/- 0.001
[Fri Jan 27 14:47:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:29 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 14:47:29 2012] Source does appear to be extended
[Fri Jan 27 14:47:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 05:02:52 2012] XMMSAS src. selection expression = ellipse(30281.497600, 23777.687200, 316.453809, 316.453809, 0.000000, X, Y)
[Sat Jan 28 05:02:52 2012] Writing source region out to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src24_src.reg
[Sat Jan 28 05:02:52 2012] Extracting stamp from image fullrun_mos1_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (330, 256) - (367, 292)
[Sat Jan 28 05:02:52 2012] XMMSAS bgd. selection expression = annulus(30281.497600, 23777.687200, 527.423015, 1054.846030, X, Y) && !ellipse(31146.955000, 22754.363000, 430.896012, 381.600011, 313.611400, X, Y) && !ellipse(31866.818634, 24449.919952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29184.081451, 25307.005890, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 05:02:52 2012] Writing fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src24.gif
[Sat Jan 28 05:17:10 2012] Mean detx,y = (-2238.24, 3421.80) 
[Sat Jan 28 05:17:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:17:17 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:17:17 2012] Setting source spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Jan 28 05:17:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat Jan 28 11:06:35 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:36 2012] Error reading totcts from fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Jan 28 11:06:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:40 2012] Using photon index=1.80, rate=0.0287, arf fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src24.arf
[Sat Jan 28 11:06:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:40 2012] Updating source flux to 3.7e-13