[Thu Jan 26 16:07:07 2012] Detection parameters:
  Position = (248.9, 296.2) = 0 43 10.60 41 14 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2912.6 +/- 65.0
  Background counts = 24.2
  Rate = 0.1 +/- 0.003

[Thu Jan 26 16:07:12 2012] Off-axis axis estimate = 3.60'
[Thu Jan 26 21:18:37 2012] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:18:37 2012] Initial guess for spatial extent in simple fitting = 8.23"
[Thu Jan 26 21:18:37 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.093
[Thu Jan 26 21:18:37 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.23"
[Fri Jan 27 00:38:58 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jan 27 00:38:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src2.csv
[Fri Jan 27 00:38:58 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jan 27 00:38:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src2.csv
[Fri Jan 27 00:38:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:39:00 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jan 27 00:39:00 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jan 27 00:39:00 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jan 27 04:11:29 2012] Spatial fit model total counts = 2821.000000, observed total counts = 2821.000000
[Fri Jan 27 04:11:29 2012] Offset between fit and detection position for source 2 = 0.169314 pixels
[Fri Jan 27 04:11:29 2012] 2835.401000 total counts/ 774.051000 bgd. counts: snr = 74.091255
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.169314 pixels
  Position = (248.9, 296.4) = 0 43 10.60 41 14 51.2
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 2061.3 +/- 53.2
  Background counts = 774.1
  Rate = 0.08 +/- 0.002
[Fri Jan 27 04:11:30 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:30 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 04:11:30 2012] Source does appear to be extended
[Fri Jan 27 04:11:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 08:16:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan 27 08:16:36 2012] Initial guess for spatial extent in simple fitting = 5.27"
[Fri Jan 27 08:16:36 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.024
[Fri Jan 27 08:16:36 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.27"
[Fri Jan 27 11:46:06 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jan 27 11:46:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src2.csv
[Fri Jan 27 11:46:06 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jan 27 11:46:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src2.csv
[Fri Jan 27 11:46:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 11:46:07 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jan 27 11:46:07 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jan 27 11:46:07 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jan 27 14:47:29 2012] Spatial fit model total counts = 2816.660000, observed total counts = 2821.000000
[Fri Jan 27 14:47:29 2012] Offset between fit and detection position for source 2 = 0.000189 pixels
[Fri Jan 27 14:47:29 2012] 2830.997000 total counts/ 771.417000 bgd. counts: snr = 74.153911
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000189 pixels
  Position = (248.9, 296.4) = 0 43 10.60 41 14 51.2
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 2059.6 +/- 53.2
  Background counts = 771.4
  Rate = 0.08 +/- 0.002
[Fri Jan 27 14:47:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:29 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 14:47:29 2012] Source does appear to be extended
[Fri Jan 27 14:47:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 05:02:51 2012] Counts = 2059.580000, rescaling region sizes by 2.000000
[Sat Jan 28 05:02:51 2012] XMMSAS src. selection expression = ellipse(21604.707660, 25737.521400, 633.931218, 633.931218, 0.000000, X, Y)
[Sat Jan 28 05:02:51 2012] Writing source region out to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src2_src.reg
[Sat Jan 28 05:02:51 2012] Extracting stamp from image fullrun_mos1_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (212, 260) - (285, 333)
[Sat Jan 28 05:02:51 2012] XMMSAS bgd. selection expression = annulus(21604.707660, 25737.521400, 2113.104061, 4226.208122, X, Y) && !ellipse(25142.626000, 27171.138000, 362.632810, 362.632810, 0.000000, X, Y) && !ellipse(23299.821000, 26428.107800, 485.322414, 422.778412, 64.456700, X, Y) && !ellipse(25688.500160, 26703.022600, 268.315208, 268.315208, 0.000000, X, Y) && !ellipse(24463.303955, 21265.702164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24029.636000, 27142.432000, 286.347208, 286.347208, 0.000000, X, Y) && !ellipse(23139.724400, 29600.117400, 396.023211, 396.023211, 0.000000, X, Y) && !ellipse(16652.773285, 20732.180664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25616.028000, 28059.416000, 452.484813, 452.484813, 0.000000, X, Y) && !ellipse(24380.339600, 26490.756012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25334.313600, 30435.290000, 1285.576037, 1285.576037, 0.000000, X, Y) && !ellipse(22035.838000, 23279.542800, 343.156810, 343.156810, 0.000000, X, Y) && !ellipse(17696.763102, 30119.041488, 383.356118, 370.656983, 90.000000, X, Y) && !ellipse(26463.563202, 28874.542206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23097.363068, 27104.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24995.748840, 28588.983185, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 05:02:51 2012] Writing fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src2.gif
[Sat Jan 28 05:03:12 2012] Mean detx,y = (-2782.27, -5449.36) 
[Sat Jan 28 05:03:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:03:36 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:03:36 2012] Setting source spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jan 28 05:03:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jan 28 11:06:34 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:34 2012] Error reading totcts from fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jan 28 11:06:38 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:38 2012] Using photon index=1.80, rate=0.0756, arf fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src2.arf
[Sat Jan 28 11:06:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:38 2012] Updating source flux to 9.8e-13