[Thu Jan 26 16:07:08 2012] Detection parameters:
  Position = (321.6, 310.1) = 0 42 42.57 41 15 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1404.2 +/- 51.5
  Background counts = 51.6
  Rate = 0.05 +/- 0.002

[Thu Jan 26 16:07:12 2012] Off-axis axis estimate = 1.88'
[Thu Jan 26 21:18:37 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:18:37 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Thu Jan 26 21:18:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.039
[Thu Jan 26 21:18:37 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.37"
[Fri Jan 27 00:38:58 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jan 27 00:38:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src15.csv
[Fri Jan 27 00:38:58 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jan 27 00:38:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src15.csv
[Fri Jan 27 00:38:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:39:00 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jan 27 00:39:00 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jan 27 00:39:00 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Jan 27 04:11:29 2012] Warning, spatial fit 15 centroid is now closest to src. 4
[Fri Jan 27 04:11:30 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 04:11:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 04:11:30 2012] Assessing source extent using major
[Fri Jan 27 04:11:30 2012] Source does appear to be extended
[Fri Jan 27 04:11:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 04:11:30 2012] Source is confused with source 4
[Fri Jan 27 08:16:36 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Fri Jan 27 08:16:36 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Fri Jan 27 08:16:36 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.039
[Fri Jan 27 08:16:36 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.37"
[Fri Jan 27 11:46:06 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src15.ximg exists
[Fri Jan 27 11:46:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src15.csv
[Fri Jan 27 11:46:06 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Jan 27 11:46:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src15.csv
[Fri Jan 27 11:46:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 11:46:08 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Jan 27 11:46:08 2012] fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Jan 27 11:46:08 2012] Fit fullrun_mos1_xmm0505720201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Jan 27 14:47:29 2012] Source 13 is offset by 4.696404 and -4.358677 pixels which is larger than
2 X fitted extent = 4.590455 x 2.190952, not incorporating fit results
[Fri Jan 27 14:47:29 2012] Warning, spatial fit 15 centroid is now closest to src. 4
[Fri Jan 27 14:47:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 14:47:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 14:47:29 2012] Assessing source extent using major
[Fri Jan 27 14:47:29 2012] Source does appear to be extended
[Fri Jan 27 14:47:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 05:02:52 2012] Counts = 1404.217529, rescaling region sizes by 2.000000
[Sat Jan 28 05:02:52 2012] XMMSAS src. selection expression = ellipse(27927.591492, 26932.555542, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jan 28 05:02:52 2012] Writing source region out to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src13_src.reg
[Sat Jan 28 05:02:52 2012] Extracting stamp from image fullrun_mos1_xmm0505720201_pi300-10000_cl_sm2.00.img.gz, (247, 235) - (397, 385)
[Sat Jan 28 05:02:52 2012] XMMSAS bgd. selection expression = annulus(27927.591492, 26932.555542, 4350.000000, 8700.000000, X, Y) && !ellipse(28829.739840, 27177.655400, 414.271212, 414.271212, 0.000000, X, Y) && !ellipse(21604.707660, 25737.521400, 422.620812, 422.620812, 0.000000, X, Y) && !ellipse(26612.464713, 26372.861505, 582.879568, 390.453561, 123.245792, X, Y) && !ellipse(27541.482000, 27274.912000, 400.281612, 400.281612, 0.000000, X, Y) && !ellipse(27159.380000, 27505.029200, 1159.896033, 1159.896033, 0.000000, X, Y) && !ellipse(25142.626000, 27171.138000, 362.632810, 362.632810, 0.000000, X, Y) && !ellipse(30508.146760, 27537.102600, 413.699212, 413.699212, 0.000000, X, Y) && !ellipse(25693.848300, 30592.947200, 385.500811, 385.500811, 0.000000, X, Y) && !ellipse(23299.821000, 26428.107800, 485.322414, 422.778412, 64.456700, X, Y) && !ellipse(31146.955000, 22754.363000, 430.896012, 381.600011, 313.611400, X, Y) && !ellipse(33431.979720, 22763.041800, 429.322412, 429.322412, 0.000000, X, Y) && !ellipse(32359.033200, 26602.908000, 334.078410, 334.078410, 0.000000, X, Y) && !ellipse(25688.500160, 26703.022600, 268.315208, 268.315208, 0.000000, X, Y) && !ellipse(35801.465851, 29811.817993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32683.598400, 27129.155600, 306.364009, 306.364009, 0.000000, X, Y) && !ellipse(27418.688800, 21872.932200, 400.096012, 400.096012, 0.000000, X, Y) && !ellipse(33337.550873, 24752.033081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.796200, 31087.690760, 403.665612, 403.665612, 0.000000, X, Y) && !ellipse(24463.303955, 21265.702164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34557.817800, 30242.432600, 359.629610, 359.629610, 0.000000, X, Y) && !ellipse(24029.636000, 27142.432000, 286.347208, 286.347208, 0.000000, X, Y) && !ellipse(30281.497600, 23777.687200, 421.938412, 421.938412, 0.000000, X, Y) && !ellipse(23139.724400, 29600.117400, 396.023211, 396.023211, 0.000000, X, Y) && !ellipse(31169.438019, 19821.982193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30511.152710, 31467.666840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28008.659000, 25578.188400, 402.324012, 402.324012, 0.000000, X, Y) && !ellipse(28468.125200, 30395.346000, 324.337609, 324.337609, 0.000000, X, Y) && !ellipse(34001.791412, 28729.471405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27335.164400, 28748.484800, 248.674407, 248.674407, 0.000000, X, Y) && !ellipse(29585.990200, 32010.643200, 345.372810, 345.372810, 0.000000, X, Y) && !ellipse(25616.028000, 28059.416000, 452.484813, 452.484813, 0.000000, X, Y) && !ellipse(28604.162800, 25265.902800, 251.192007, 251.192007, 0.000000, X, Y) && !ellipse(33660.134000, 26070.606600, 418.090412, 354.692810, 89.942000, X, Y) && !ellipse(28358.130400, 24040.177800, 394.052811, 394.052811, 0.000000, X, Y) && !ellipse(24380.339600, 26490.756012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31659.731659, 30999.834747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23290.654510, 33538.751648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31866.818634, 24449.919952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34890.164000, 20880.673800, 442.278650, 442.278650, 0.000000, X, Y) && !ellipse(29875.883850, 27458.426575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25334.313600, 30435.290000, 1285.576037, 1285.576037, 0.000000, X, Y) && !ellipse(35516.344600, 32860.964000, 392.268011, 392.268011, 0.000000, X, Y) && !ellipse(32298.363680, 24846.248000, 288.660008, 288.660008, 0.000000, X, Y) && !ellipse(26441.132000, 29820.402000, 302.207209, 302.207209, 0.000000, X, Y) && !ellipse(22035.838000, 23279.542800, 343.156810, 343.156810, 0.000000, X, Y) && !ellipse(35444.656000, 29597.016000, 1647.008047, 1647.008047, 0.000000, X, Y) && !ellipse(27330.145400, 24871.114800, 388.067211, 388.067211, 0.000000, X, Y) && !ellipse(27396.657318, 29146.475616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.533000, 33186.792000, 445.918413, 445.918413, 0.000000, X, Y) && !ellipse(34078.909393, 32568.473846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26463.563202, 28874.542206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23097.363068, 27104.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26888.171417, 22191.699387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29184.081451, 25307.005890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24995.748840, 28588.983185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28958.905762, 28913.826019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36606.466000, 28314.214000, 1724.728050, 1724.728050, 0.000000, X, Y)
[Sat Jan 28 05:02:52 2012] Writing fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src13.gif
[Sat Jan 28 05:12:50 2012] Mean detx,y = (381.70, 421.11) 
[Sat Jan 28 05:12:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 05:14:45 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 05:14:45 2012] Setting source spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jan 28 05:14:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jan 28 06:34:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 06:34:25 2012] rmf not generated due to insufficient counts
[Sat Jan 28 11:06:35 2012] Updating aperture counts using extracted products
[Sat Jan 28 11:06:35 2012] Error reading totcts from fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jan 28 11:06:39 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 11:06:39 2012] Using photon index=1.80, rate=0.0523, arf fullrun_mos1_xmm0505720201_pi300-10000_pass1_cl_src13.arf
[Sat Jan 28 11:06:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 11:06:39 2012] Updating source flux to 4.7e-13
[Sat Jan 28 11:06:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting