[Sun May  6 01:20:10 2012] Detection parameters:
  Position = (259.5, 262.1) = 17 45 48.69 -29 1 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 883.5 +/- 64.2
  Background counts = 966.3
  Rate = 0.009 +/- 0.0007

[Sun May  6 01:20:19 2012] Off-axis axis estimate = 3.86'
[Sun May  6 01:45:13 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:45:13 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Sun May  6 01:45:13 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.066
[Sun May  6 01:45:13 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 8.36"
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src85.ximg exists
[Sun May  6 14:08:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src85.csv
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src85_1.ximg exists
[Sun May  6 14:08:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src85.csv
[Sun May  6 14:08:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Sun May  6 14:08:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src85.csv
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Sun May  6 14:08:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src85.csv
[Sun May  6 14:08:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:13:03 2012] Source 93 is offset by 4.429890 and 4.225061 pixels which is larger than
2 X fitted extent = 1.542106 x 1.542106, not incorporating fit results
[Tue May  8 12:13:04 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:04 2012] Assessing source extent using major
[Tue May  8 12:13:04 2012] Source does appear to be extended
[Tue May  8 12:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:15:59 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Tue May  8 12:15:59 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Tue May  8 12:15:59 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.066
[Tue May  8 12:15:59 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 8.36"
[Thu May 10 00:04:01 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src73.ximg exists
[Thu May 10 00:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src73.csv
[Thu May 10 00:04:01 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src73_1.ximg exists
[Thu May 10 00:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src73.csv
[Thu May 10 00:04:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:04:03 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Thu May 10 00:04:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src73.csv
[Thu May 10 00:04:03 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Thu May 10 00:04:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src73.csv
[Thu May 10 00:04:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:41:16 2012] Source 93 is offset by 4.425430 and 4.232371 pixels which is larger than
2 X fitted extent = 1.478915 x 1.478915, not incorporating fit results
[Sat May 12 00:41:16 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:16 2012] Assessing source extent using major
[Sat May 12 00:41:16 2012] Source does appear to be extended
[Sat May 12 00:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 00:43:22 2012] XMMSAS src. selection expression = ellipse(22525.164429, 22755.618317, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 00:43:22 2012] Writing source region out to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src93_src.reg
[Sat May 12 00:43:22 2012] Extracting stamp from image fullrun_pn_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (222, 225) - (297, 300)
[Sat May 12 00:43:22 2012] XMMSAS bgd. selection expression = annulus(22525.164429, 22755.618317, 1087.500000, 2175.000000, X, Y) && !ellipse(25962.656416, 22845.332800, 1804.545652, 1804.545652, 0.000000, X, Y) && !ellipse(24797.492400, 24082.276200, 6979.008201, 3958.200114, 32.072000, X, Y) && !ellipse(24043.320801, 24397.984924, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23873.601600, 24627.858000, 3566.640103, 3566.640103, 0.000000, X, Y) && !ellipse(21218.230240, 24152.800934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20589.855164, 23733.401886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23912.167664, 22484.462830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22615.246918, 22049.417694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19675.408000, 21088.128000, 1886.216054, 1886.216054, 0.000000, X, Y) && !ellipse(20413.798843, 21842.709061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21699.101181, 21440.599564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24221.279449, 21528.924423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19595.260000, 21236.260000, 925.392027, 925.392027, 0.000000, X, Y) && !ellipse(20869.849243, 20664.709732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22387.225037, 21094.485962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24441.495544, 20753.081055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23108.360199, 20682.396210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21384.445694, 20492.760742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20024.917200, 20540.898000, 810.272023, 810.272023, 0.000000, X, Y) && !ellipse(21944.636963, 20281.569092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24404.107422, 19977.935959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20282.004517, 19964.707275, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 00:43:22 2012] Writing fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src93.gif
[Sat May 12 05:47:04 2012] Mean detx,y = (2396.13, -1633.53) 
[Sat May 12 05:47:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 05:47:56 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 05:47:56 2012] Setting source spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Sat May 12 05:47:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Sun May 13 03:55:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 13 03:55:29 2012] rmf not generated due to insufficient counts
[Tue May 15 01:58:13 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:13 2012] Error reading totcts from fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Tue May 15 01:58:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:22 2012] Using photon index=1.80, rate=0.00915, arf fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src93.arf
[Tue May 15 01:58:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:22 2012] Updating source flux to 2.5e-14
[Tue May 15 02:19:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting