[Sun May  6 01:20:08 2012] Detection parameters:
  Position = (424.5, 302.2) = 17 44 53.97 -28 58 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1020.4 +/- 46.5
  Background counts = 323.6
  Rate = 0.01 +/- 0.0005

[Sun May  6 01:20:19 2012] Off-axis axis estimate = 9.15'
[Sun May  6 01:45:13 2012] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:45:13 2012] Initial guess for spatial extent in simple fitting = 11.00"
[Sun May  6 01:45:13 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.981
[Sun May  6 01:45:13 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 11.00"
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src75.ximg exists
[Sun May  6 14:08:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src75.csv
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src75_1.ximg exists
[Sun May  6 14:08:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src75.csv
[Sun May  6 14:08:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Sun May  6 14:08:57 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Tue May  8 12:13:03 2012] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 80 at 13.398673 pixels away
[Tue May  8 12:13:04 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:04 2012] Assessing source extent using major
[Tue May  8 12:13:04 2012] Source does appear to be extended
[Tue May  8 12:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:15:59 2012] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Tue May  8 12:15:59 2012] Initial guess for spatial extent in simple fitting = 11.00"
[Tue May  8 12:15:59 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.981
[Tue May  8 12:15:59 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 11.00"
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src64.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src64.csv
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src64_1.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src64.csv
[Thu May 10 00:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:04:03 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Thu May 10 00:04:03 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Thu May 10 00:04:03 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Sat May 12 00:41:15 2012] Spatial fit model total counts = 2848.230000, observed total counts = 2622.000000
[Sat May 12 00:41:15 2012] Offset between fit and detection position for source 80 = 0.529440 pixels
[Sat May 12 00:41:15 2012] Warning, changing simple spatial fit ID from 64 to 57
[Sat May 12 00:41:15 2012] 2806.298000 total counts/ 2277.620000 bgd. counts: snr = 11.077726
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.529440 pixels
  Position = (424.1, 302.5) = 17 44 54.12 -28 58 41.8
  Extent = 5.6" x 5.6", rotation angle = 0
  Source counts = 528.7 +/- 53.0
  Background counts = 2277.6
  Rate = 0.006 +/- 0.0006
[Sat May 12 00:41:15 2012] Spatial fit model total counts = 3251.560000, observed total counts = 3251.000000
[Sat May 12 00:41:15 2012] Offset between fit and detection position for source 80 = 0.145214 pixels
[Sat May 12 00:41:15 2012] Warning, changing simple spatial fit ID from 57 to 64
[Sat May 12 00:41:15 2012] 3268.968000 total counts/ 2714.390000 bgd. counts: snr = 10.644531
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.145214 pixels
  Position = (424.2, 302.5) = 17 44 54.08 -28 58 41.9
  Extent = 5.1 (4.7-5.6)", rotation angle = 0
  Source counts = 554.6 +/- 57.2
  Background counts = 2714.4
  Rate = 0.007 +/- 0.0007
[Sat May 12 00:41:16 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:16 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:41:16 2012] Source does appear to be extended
[Sat May 12 00:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 00:43:20 2012] XMMSAS src. selection expression = ellipse(36857.330280, 26264.947000, 306.091209, 306.091209, 0.000000, X, Y)
[Sat May 12 00:43:20 2012] Writing source region out to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src80_src.reg
[Sat May 12 00:43:20 2012] Extracting stamp from image fullrun_pn_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (407, 285) - (442, 320)
[Sat May 12 00:43:20 2012] XMMSAS bgd. selection expression = annulus(36857.330280, 26264.947000, 510.152015, 1020.304029, X, Y) && !ellipse(37438.171936, 26650.185211, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 00:43:20 2012] Writing fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src80.gif
[Sat May 12 05:13:14 2012] Mean detx,y = (-12008.01, 1374.39) 
[Sat May 12 05:13:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 05:13:49 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 05:13:50 2012] Setting source spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Sat May 12 05:13:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Tue May 15 01:58:12 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:12 2012] Error reading totcts from fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Tue May 15 01:58:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:22 2012] Using photon index=1.80, rate=0.00659, arf fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src80.arf
[Tue May 15 01:58:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:22 2012] Updating source flux to 4.9e-14