[Sun May  6 01:20:08 2012] Detection parameters:
  Position = (269.2, 297.9) = 17 45 45.45 -28 59 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2443.6 +/- 84.7
  Background counts = 1066.2
  Rate = 0.03 +/- 0.001

[Sun May  6 01:20:19 2012] Off-axis axis estimate = 2.12'
[Sun May  6 01:45:13 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:45:13 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Sun May  6 01:45:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Sun May  6 01:45:13 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 7.49"
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src73.ximg exists
[Sun May  6 14:08:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src73.csv
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src73_1.ximg exists
[Sun May  6 14:08:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src73.csv
[Sun May  6 14:08:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Sun May  6 14:08:57 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Tue May  8 12:13:03 2012] Source 78 is offset by -4.240127 and 3.455369 pixels which is larger than
2 X fitted extent = 2.963274 x 2.963274, not incorporating fit results
[Tue May  8 12:13:03 2012] Spatial fit model total counts = 22038.000000, observed total counts = 20984.000000
[Tue May  8 12:13:03 2012] Offset between fit and detection position for source 78 = 5.818379 pixels
[Tue May  8 12:13:03 2012] 20263.640000 total counts/ 5820.540000 bgd. counts: snr = 189.312277
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 5.818379 pixels
  Position = (273.0, 293.5) = 17 45 44.21 -28 59 21.3
  Extent = 15.0 (15.0-29.9)", rotation angle = 0
  Source counts = 14443.1 +/- 142.4
  Background counts = 5820.5
  Rate = 0.2 +/- 0.002
[Tue May  8 12:13:04 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:04 2012] Assessing source extent using major axis lower bound
[Tue May  8 12:13:04 2012] Source does appear to be extended
[Tue May  8 12:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:13:04 2012] Source is confused with source 5
[Tue May  8 12:15:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 12:15:59 2012] Initial guess for spatial extent in simple fitting = 14.97"
[Tue May  8 12:15:59 2012] source mask rpix=3.4, npix_max = 62, mask sum = 56, frac = 0.901
[Tue May  8 12:15:59 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 14.97"
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src62.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src62.csv
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src62_1.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src62.csv
[Thu May 10 00:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Thu May 10 00:04:03 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Thu May 10 00:04:03 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Sat May 12 00:41:15 2012] Spatial fit model total counts = 17795.600000, observed total counts = 17768.000000
[Sat May 12 00:41:15 2012] Offset between fit and detection position for source 78 = 1.097909 pixels
[Sat May 12 00:41:15 2012] Warning, changing simple spatial fit ID from 62 to 61
[Sat May 12 00:41:15 2012] 17217.527000 total counts/ 17033.400000 bgd. counts: snr = 1.410804
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 1.097909 pixels
  Position = (273.5, 294.5) = 17 45 44.05 -28 59 17.0
  Extent = 6.4 (4.1-9.3)", rotation angle = 0
  Source counts = 184.1 +/- 131.2
  Background counts = 17033.4
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability