[Sun May  6 01:20:07 2012] Detection parameters:
  Position = (175.5, 302.1) = 17 46 16.53 -28 58 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.1 +/- 34.8
  Background counts = 561.7
  Rate = 0.004 +/- 0.0006

[Sun May  6 01:20:19 2012] Off-axis axis estimate = 8.92'
[Sun May  6 01:45:13 2012] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:45:13 2012] Initial guess for spatial extent in simple fitting = 10.89"
[Sun May  6 01:45:13 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.998
[Sun May  6 01:45:13 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 10.89"
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src71.ximg exists
[Sun May  6 14:08:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src71.csv
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src71_1.ximg exists
[Sun May  6 14:08:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src71.csv
[Sun May  6 14:08:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sun May  6 14:08:57 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Tue May  8 12:13:03 2012] Spatial fit model total counts = 5170.190000, observed total counts = 5171.000000
[Tue May  8 12:13:03 2012] Offset between fit and detection position for source 76 = 4.507376 pixels
[Tue May  8 12:13:03 2012] 5096.889000 total counts/ 4242.890000 bgd. counts: snr = 13.110718
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 4.507376 pixels
  Position = (179.1, 304.7) = 17 46 15.33 -28 58 32.0
  Extent = 21.8 (21.7-43.6)", rotation angle = 0
  Source counts = 854.0 +/- 71.4
  Background counts = 4242.9
  Rate = 0.01 +/- 0.0008
[Tue May  8 12:13:04 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:04 2012] Assessing source extent using major axis lower bound
[Tue May  8 12:13:04 2012] Source does appear to be extended
[Tue May  8 12:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:13:04 2012] Source is confused with source 65
[Tue May  8 12:15:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 12:15:59 2012] Initial guess for spatial extent in simple fitting = 21.78"
[Tue May  8 12:15:59 2012] source mask rpix=5.0, npix_max = 121, mask sum = 121, frac = 0.998
[Tue May  8 12:15:59 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 21.78"
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src60.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src60.csv
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src60_1.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src60.csv
[Thu May 10 00:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Thu May 10 00:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src60.csv
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Thu May 10 00:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src60.csv
[Thu May 10 00:04:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:41:15 2012] Warning, spatial fit 60 centroid is now closest to src. 65
[Sat May 12 00:41:16 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:16 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:41:16 2012] Source does appear to be extended
[Sat May 12 00:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 00:43:20 2012] XMMSAS src. selection expression = ellipse(15532.152000, 26464.602800, 1306.542038, 1306.542038, 0.000000, X, Y)
[Sat May 12 00:43:20 2012] Writing source region out to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src76_src.reg
[Sat May 12 00:43:20 2012] Extracting stamp from image fullrun_pn_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (104, 230) - (254, 380)
[Sat May 12 00:43:20 2012] XMMSAS bgd. selection expression = annulus(15532.152000, 26464.602800, 2177.570063, 4355.140125, X, Y) && !ellipse(24797.492400, 24082.276200, 6979.008201, 3958.200114, 32.072000, X, Y) && !ellipse(14513.940000, 32669.918000, 1898.128055, 1107.784032, 310.826000, X, Y) && !ellipse(12729.232000, 32569.556000, 2010.344058, 2010.344058, 0.000000, X, Y) && !ellipse(13466.430145, 31263.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12390.328186, 31453.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18214.675247, 30923.736298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14658.424133, 30848.856506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13449.909225, 30840.564850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14033.435547, 30063.562561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12979.925232, 30401.553101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13629.766220, 30330.695679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18388.383194, 29922.986725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19320.421936, 28562.706360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18687.556000, 28509.102600, 1561.288045, 1561.288045, 0.000000, X, Y) && !ellipse(15801.987732, 27253.009613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19251.809341, 26666.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19297.197067, 26052.137207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17618.902603, 24897.172913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19186.031620, 24202.006600, 591.142417, 591.142417, 0.000000, X, Y) && !ellipse(20589.855164, 23733.401886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14559.046387, 23417.049835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19675.408000, 21088.128000, 1886.216054, 1886.216054, 0.000000, X, Y) && !ellipse(14446.007187, 22048.005219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20413.798843, 21842.709061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15901.070770, 21893.751999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19595.260000, 21236.260000, 925.392027, 925.392027, 0.000000, X, Y)
[Sat May 12 00:43:20 2012] Writing fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src76.gif
[Sat May 12 05:00:12 2012] Mean detx,y = (9320.64, 2482.87) 
[Sat May 12 05:00:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 05:02:34 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 05:02:35 2012] Setting source spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Sat May 12 05:02:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Tue May 15 01:58:12 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:12 2012] Error reading totcts from fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Tue May 15 01:58:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:21 2012] Using photon index=1.80, rate=0.0102, arf fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src76.arf
[Tue May 15 01:58:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:21 2012] Updating source flux to 3.7e-14
[Tue May 15 02:19:35 2012] Flag c found in src. 76 procflags, skipping spectral fitting