[Sun May  6 01:20:07 2012] Detection parameters:
  Position = (269.5, 305.1) = 17 45 45.37 -28 58 29.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3783.4 +/- 90.6
  Background counts = 1024.2
  Rate = 0.05 +/- 0.001

[Sun May  6 01:20:19 2012] Off-axis axis estimate = 2.15'
[Sun May  6 01:45:13 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:45:13 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Sun May  6 01:45:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.010
[Sun May  6 01:45:13 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 7.51"
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src70.ximg exists
[Sun May  6 14:08:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src70.csv
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src70_1.ximg exists
[Sun May  6 14:08:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src70.csv
[Sun May  6 14:08:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Sun May  6 14:08:57 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Tue May  8 12:13:03 2012] Source 75 is offset by 3.160848 and -2.911881 pixels which is larger than
2 X fitted extent = 1.707991 x 1.707991, not incorporating fit results
[Tue May  8 12:13:03 2012] Spatial fit model total counts = 16443.000000, observed total counts = 16434.000000
[Tue May  8 12:13:03 2012] Offset between fit and detection position for source 75 = 0.377019 pixels
[Tue May  8 12:13:03 2012] 16204.950000 total counts/ 14426.800000 bgd. counts: snr = 14.804147
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 0.377019 pixels
  Position = (269.3, 305.4) = 17 45 45.43 -28 58 29.5
  Extent = 5.9 (5.5-6.2)", rotation angle = 0
  Source counts = 1778.2 +/- 127.3
  Background counts = 14426.8
  Rate = 0.02 +/- 0.002
[Tue May  8 12:13:04 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:04 2012] Assessing source extent using major axis lower bound
[Tue May  8 12:13:04 2012] Source does appear to be extended
[Tue May  8 12:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:15:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 12:15:59 2012] Initial guess for spatial extent in simple fitting = 5.88"
[Tue May  8 12:15:59 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.874
[Tue May  8 12:15:59 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 5.88"
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src59.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src59.csv
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src59_1.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src59.csv
[Thu May 10 00:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Thu May 10 00:04:02 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Sat May 12 00:41:15 2012] Spatial fit model total counts = 16437.600000, observed total counts = 16434.000000
[Sat May 12 00:41:15 2012] Offset between fit and detection position for source 75 = 0.008793 pixels
[Sat May 12 00:41:15 2012] 16256.560000 total counts/ 14485.800000 bgd. counts: snr = 14.712567
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 0.008793 pixels
  Position = (269.3, 305.4) = 17 45 45.43 -28 58 29.6
  Extent = 5.9 (5.5-6.3)", rotation angle = 0
  Source counts = 1770.8 +/- 127.5
  Background counts = 14485.8
  Rate = 0.02 +/- 0.002
[Sat May 12 00:41:16 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:16 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:41:16 2012] Source does appear to be extended
[Sat May 12 00:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 00:43:20 2012] Counts = 1770.760000, rescaling region sizes by 2.000000
[Sat May 12 00:43:20 2012] XMMSAS src. selection expression = ellipse(23379.328400, 26519.681600, 707.500820, 707.500820, 0.000000, X, Y)
[Sat May 12 00:43:20 2012] Writing source region out to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src75_src.reg
[Sat May 12 00:43:20 2012] Extracting stamp from image fullrun_pn_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (229, 265) - (310, 346)
[Sat May 12 00:43:20 2012] XMMSAS bgd. selection expression = annulus(23379.328400, 26519.681600, 2358.336068, 4716.672136, X, Y) && !ellipse(25962.656416, 22845.332800, 1804.545652, 1804.545652, 0.000000, X, Y) && !ellipse(24797.492400, 24082.276200, 6979.008201, 3958.200114, 32.072000, X, Y) && !ellipse(24043.320801, 24397.984924, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25698.697052, 23811.863312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.601600, 24627.858000, 3566.640103, 3566.640103, 0.000000, X, Y) && !ellipse(21974.419754, 31353.824493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18214.675247, 30923.736298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.447800, 30337.046000, 1387.640040, 1387.640040, 0.000000, X, Y) && !ellipse(18388.383194, 29922.986725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22699.732000, 29199.854000, 1322.976038, 1322.976038, 0.000000, X, Y) && !ellipse(23161.232452, 29367.363434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26743.267883, 29152.112244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22277.890930, 28999.758698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21129.528366, 28917.394379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25835.470200, 28742.621600, 404.719212, 404.719212, 0.000000, X, Y) && !ellipse(19320.421936, 28562.706360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18687.556000, 28509.102600, 1561.288045, 1561.288045, 0.000000, X, Y) && !ellipse(21822.628000, 28599.900000, 1310.896038, 1310.896038, 0.000000, X, Y) && !ellipse(21221.660538, 28135.254608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24239.437195, 27432.391357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25566.606689, 27239.336212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25974.808000, 27020.552000, 867.648025, 404.544012, 126.522400, X, Y) && !ellipse(22467.950440, 27282.737600, 440.408013, 440.408013, 0.000000, X, Y) && !ellipse(24339.548800, 26853.862000, 489.360814, 489.360814, 0.000000, X, Y) && !ellipse(27807.339905, 26903.700684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19251.809341, 26666.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25554.021851, 26385.608887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24307.188232, 26054.909058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19297.197067, 26052.137207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28621.037354, 25437.545715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27851.596588, 25349.327057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26561.416000, 25634.060000, 1084.776031, 1084.776031, 0.000000, X, Y) && !ellipse(27316.687836, 24995.894867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19186.031620, 24202.006600, 591.142417, 591.142417, 0.000000, X, Y) && !ellipse(21218.230240, 24152.800934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27400.448700, 24063.228210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20589.855164, 23733.401886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22525.164429, 22755.618317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23912.167664, 22484.462830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28432.336456, 22403.165833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22615.246918, 22049.417694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.812805, 21887.466217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19675.408000, 21088.128000, 1886.216054, 1886.216054, 0.000000, X, Y) && !ellipse(20413.798843, 21842.709061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21699.101181, 21440.599564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28119.284607, 21532.253830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24221.279449, 21528.924423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19595.260000, 21236.260000, 925.392027, 925.392027, 0.000000, X, Y) && !ellipse(22387.225037, 21094.485962, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 00:43:20 2012] Writing fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src75.gif
[Sat May 12 04:57:29 2012] Mean detx,y = (1434.07, 2105.31) 
[Sat May 12 04:57:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 04:58:30 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 04:58:31 2012] Setting source spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Sat May 12 04:58:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Tue May 15 01:58:12 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:12 2012] Error reading totcts from fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Tue May 15 01:58:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:21 2012] Using photon index=1.80, rate=0.0211, arf fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src75.arf
[Tue May 15 01:58:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:21 2012] Updating source flux to 5.3e-14
[Tue May 15 02:19:35 2012] Flag b found in src. 75 procflags, skipping spectral fitting