[Sun May  6 01:20:04 2012] Detection parameters:
  Position = (256.6, 333.9) = 17 45 49.62 -28 56 22.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.0 +/- 43.8
  Background counts = 892.5
  Rate = 0.004 +/- 0.0006

[Sun May  6 01:20:19 2012] Off-axis axis estimate = 3.97'
[Sun May  6 01:45:13 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:45:13 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Sun May  6 01:45:13 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.054
[Sun May  6 01:45:13 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 8.42"
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src49.ximg exists
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src49_1.ximg exists
[Sun May  6 14:08:55 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src49 appears to have run properly
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sun May  6 14:08:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src49.csv
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sun May  6 14:08:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src49.csv
[Sun May  6 14:08:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:13:02 2012] Warning, spatial fit 49 centroid is now closest to src. 47
[Tue May  8 12:13:04 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:04 2012] Assessing source extent using major
[Tue May  8 12:13:04 2012] Source does appear to be extended
[Tue May  8 12:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:13:04 2012] Source is confused with source 47
[Tue May  8 12:15:59 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Tue May  8 12:15:59 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Tue May  8 12:15:59 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.054
[Tue May  8 12:15:59 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 8.42"
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src41.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src41.csv
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src41_1.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src41.csv
[Thu May 10 00:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Thu May 10 00:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Thu May 10 00:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Thu May 10 00:04:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:41:15 2012] Warning, spatial fit 41 centroid is now closest to src. 58
[Sat May 12 00:41:16 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:16 2012] Assessing source extent using major
[Sat May 12 00:41:16 2012] Source does appear to be extended
[Sat May 12 00:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 00:43:17 2012] XMMSAS src. selection expression = ellipse(22277.890930, 28999.758698, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 00:43:17 2012] Writing source region out to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src51_src.reg
[Sat May 12 00:43:17 2012] Extracting stamp from image fullrun_pn_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (219, 296) - (294, 371)
[Sat May 12 00:43:17 2012] XMMSAS bgd. selection expression = annulus(22277.890930, 28999.758698, 1087.500000, 2175.000000, X, Y) && !ellipse(24797.492400, 24082.276200, 6979.008201, 3958.200114, 32.072000, X, Y) && !ellipse(24043.320801, 24397.984924, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23873.601600, 24627.858000, 3566.640103, 3566.640103, 0.000000, X, Y) && !ellipse(21974.419754, 31353.824493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.447800, 30337.046000, 1387.640040, 1387.640040, 0.000000, X, Y) && !ellipse(22699.732000, 29199.854000, 1322.976038, 1322.976038, 0.000000, X, Y) && !ellipse(23161.232452, 29367.363434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21129.528366, 28917.394379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19320.421936, 28562.706360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18687.556000, 28509.102600, 1561.288045, 1561.288045, 0.000000, X, Y) && !ellipse(21822.628000, 28599.900000, 1310.896038, 1310.896038, 0.000000, X, Y) && !ellipse(21221.660538, 28135.254608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24239.437195, 27432.391357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22467.950440, 27282.737600, 440.408013, 440.408013, 0.000000, X, Y) && !ellipse(24339.548800, 26853.862000, 489.360814, 489.360814, 0.000000, X, Y) && !ellipse(19251.809341, 26666.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23379.328400, 26519.681600, 471.667214, 471.667214, 0.000000, X, Y) && !ellipse(24307.188232, 26054.909058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19297.197067, 26052.137207, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 00:43:17 2012] Writing fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src51.gif
[Sat May 12 03:52:20 2012] Mean detx,y = (2477.03, 4677.59) 
[Sat May 12 03:52:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 03:53:13 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 03:53:13 2012] Setting source spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sat May 12 03:53:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sun May 13 02:32:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 13 02:32:07 2012] rmf not generated due to insufficient counts
[Tue May 15 01:58:10 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:10 2012] Error reading totcts from fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Tue May 15 01:58:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:21 2012] Using photon index=1.80, rate=0.00417, arf fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src51.arf
[Tue May 15 01:58:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:21 2012] Updating source flux to 1.3e-14
[Tue May 15 02:19:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting