[Sun May  6 01:20:03 2012] Detection parameters:
  Position = (257.9, 340.1) = 17 45 49.20 -28 55 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 539.2 +/- 47.1
  Background counts = 847.8
  Rate = 0.008 +/- 0.0007

[Sun May  6 01:20:19 2012] Off-axis axis estimate = 4.21'
[Sun May  6 01:45:13 2012] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:45:13 2012] Initial guess for spatial extent in simple fitting = 8.53"
[Sun May  6 01:45:13 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.031
[Sun May  6 01:45:13 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 8.53"
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src46.ximg exists
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src46_1.ximg exists
[Sun May  6 14:08:55 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src46 appears to have run properly
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sun May  6 14:08:57 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Tue May  8 12:13:02 2012] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 11.059183 pixels away
[Tue May  8 12:13:02 2012] Spatial fit model total counts = 7374.740000, observed total counts = 7375.000000
[Tue May  8 12:13:02 2012] Offset between fit and detection position for source 47 = 5.414047 pixels
[Tue May  8 12:13:02 2012] Warning, changing simple spatial fit ID from 46 to 47
[Tue May  8 12:13:02 2012] 7341.737000 total counts/ 6708.720000 bgd. counts: snr = 7.728506
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 5.414047 pixels
  Position = (261.7, 336.2) = 17 45 47.94 -28 56 15.4
  Extent = 16.5 (16.5-33.1)", rotation angle = 0
  Source counts = 633.0 +/- 85.7
  Background counts = 6708.7
  Rate = 0.008 +/- 0.001
[Tue May  8 12:13:02 2012] Source 47 is offset by -2.422874 and -0.151917 pixels which is larger than
2 X fitted extent = 1.060175 x 1.060175, not incorporating fit results
[Tue May  8 12:13:04 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:04 2012] Assessing source extent using major axis lower bound
[Tue May  8 12:13:04 2012] Source does appear to be extended
[Tue May  8 12:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:13:04 2012] Source is confused with source 48
[Tue May  8 12:13:04 2012] Source is confused with source 51
[Tue May  8 12:15:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 12:15:59 2012] Initial guess for spatial extent in simple fitting = 16.54"
[Tue May  8 12:15:59 2012] source mask rpix=3.8, npix_max = 74, mask sum = 81, frac = 1.094
[Tue May  8 12:15:59 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 16.54"
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src39.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src39.csv
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src39_1.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src39.csv
[Thu May 10 00:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Thu May 10 00:04:02 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sat May 12 00:41:15 2012] Warning, spatial fit 39 centroid is now closest to src. 58
[Sat May 12 00:41:15 2012] Spatial fit model total counts = 7381.570000, observed total counts = 7375.000000
[Sat May 12 00:41:15 2012] Offset between fit and detection position for source 47 = 0.235041 pixels
[Sat May 12 00:41:15 2012] Warning, changing simple spatial fit ID from 39 to 40
[Sat May 12 00:41:15 2012] 7348.151000 total counts/ 6768.630000 bgd. counts: snr = 7.043991
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.235041 pixels
  Position = (261.5, 336.2) = 17 45 48.02 -28 56 15.5
  Extent = 16.5 (16.5-33.1)", rotation angle = 0
  Source counts = 579.5 +/- 85.7
  Background counts = 6768.6
  Rate = 0.007 +/- 0.001
[Sat May 12 00:41:16 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:16 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:41:16 2012] Source does appear to be extended
[Sat May 12 00:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 00:43:17 2012] XMMSAS src. selection expression = ellipse(22699.732000, 29199.854000, 992.232029, 992.232029, 0.000000, X, Y)
[Sat May 12 00:43:17 2012] Writing source region out to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src47_src.reg
[Sat May 12 00:43:17 2012] Extracting stamp from image fullrun_pn_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (204, 279) - (318, 393)
[Sat May 12 00:43:17 2012] XMMSAS bgd. selection expression = annulus(22699.732000, 29199.854000, 1653.720048, 3307.440095, X, Y) && !ellipse(24797.492400, 24082.276200, 6979.008201, 3958.200114, 32.072000, X, Y) && !ellipse(24043.320801, 24397.984924, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23873.601600, 24627.858000, 3566.640103, 3566.640103, 0.000000, X, Y) && !ellipse(24426.906158, 33344.536255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21650.601761, 32866.779663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26664.243591, 32556.327087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24237.024240, 31950.097040, 693.753620, 693.753620, 0.000000, X, Y) && !ellipse(21974.419754, 31353.824493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.447800, 30337.046000, 1387.640040, 1387.640040, 0.000000, X, Y) && !ellipse(23161.232452, 29367.363434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26743.267883, 29152.112244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22277.890930, 28999.758698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21129.528366, 28917.394379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25835.470200, 28742.621600, 404.719212, 404.719212, 0.000000, X, Y) && !ellipse(19320.421936, 28562.706360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18687.556000, 28509.102600, 1561.288045, 1561.288045, 0.000000, X, Y) && !ellipse(21822.628000, 28599.900000, 1310.896038, 1310.896038, 0.000000, X, Y) && !ellipse(21221.660538, 28135.254608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24239.437195, 27432.391357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25566.606689, 27239.336212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25974.808000, 27020.552000, 867.648025, 404.544012, 126.522400, X, Y) && !ellipse(22467.950440, 27282.737600, 440.408013, 440.408013, 0.000000, X, Y) && !ellipse(24339.548800, 26853.862000, 489.360814, 489.360814, 0.000000, X, Y) && !ellipse(19251.809341, 26666.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25554.021851, 26385.608887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23379.328400, 26519.681600, 471.667214, 471.667214, 0.000000, X, Y) && !ellipse(24307.188232, 26054.909058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19297.197067, 26052.137207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26561.416000, 25634.060000, 1084.776031, 1084.776031, 0.000000, X, Y)
[Sat May 12 00:43:17 2012] Writing fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src47.gif
[Sat May 12 03:44:52 2012] Mean detx,y = (2069.83, 4845.39) 
[Sat May 12 03:45:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 03:45:45 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 03:45:46 2012] Setting source spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sat May 12 03:45:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Tue May 15 01:58:10 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:10 2012] Error reading totcts from fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue May 15 01:58:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:20 2012] Using photon index=1.80, rate=0.00689, arf fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src47.arf
[Tue May 15 01:58:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:20 2012] Updating source flux to 2.1e-14
[Tue May 15 02:19:35 2012] Flag b found in src. 47 procflags, skipping spectral fitting
[Tue May 15 02:19:35 2012] Flag c found in src. 47 procflags, skipping spectral fitting