[Sun May  6 01:20:02 2012] Detection parameters:
  Position = (161.9, 346.1) = 17 46 21.02 -28 55 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 237.7 +/- 36.3
  Background counts = 537.1
  Rate = 0.002 +/- 0.0004

[Sun May  6 01:20:19 2012] Off-axis axis estimate = 10.49'
[Sun May  6 01:45:13 2012] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:45:13 2012] Initial guess for spatial extent in simple fitting = 11.67"
[Sun May  6 01:45:13 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.888
[Sun May  6 01:45:13 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 11.67"
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src42.ximg exists
[Sun May  6 14:08:55 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun May  6 14:08:55 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src42 appears to have run properly
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun May  6 14:08:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun May  6 14:08:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun May  6 14:08:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun May  6 14:08:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:13:02 2012] Warning, spatial fit 42 centroid is now closest to src. 41
[Tue May  8 12:13:02 2012] Source 43 is offset by 1.448087 and 6.528903 pixels which is larger than
2 X fitted extent = 1.364156 x 1.364156, not incorporating fit results
[Tue May  8 12:13:02 2012] Source 43 is offset by -6.051913 and 7.028903 pixels which is larger than
2 X fitted extent = 1.364156 x 1.364156, not incorporating fit results
[Tue May  8 12:13:04 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:04 2012] Assessing source extent using major
[Tue May  8 12:13:04 2012] Source does appear to be extended
[Tue May  8 12:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:13:04 2012] Source is confused with source 45
[Tue May  8 12:15:59 2012] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Tue May  8 12:15:59 2012] Initial guess for spatial extent in simple fitting = 11.67"
[Tue May  8 12:15:59 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.888
[Tue May  8 12:15:59 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 11.67"
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src35.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src35.csv
[Thu May 10 00:04:00 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu May 10 00:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src35.csv
[Thu May 10 00:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu May 10 00:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu May 10 00:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu May 10 00:04:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:41:15 2012] Source 43 is offset by -2.511453 and 1.657547 pixels which is larger than
2 X fitted extent = 1.383494 x 1.383494, not incorporating fit results
[Sat May 12 00:41:15 2012] Warning, spatial fit 35 centroid is now closest to src. 45
[Sat May 12 00:41:15 2012] Spatial fit model total counts = 5167.880000, observed total counts = 4431.000000
[Sat May 12 00:41:15 2012] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 12 00:41:15 2012] Source 43 is offset by -6.051913 and 7.028903 pixels which is larger than
2 X fitted extent = 1.364156 x 1.364156, not incorporating fit results
[Sat May 12 00:41:16 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:16 2012] Assessing source extent using major
[Sat May 12 00:41:16 2012] Source does appear to be extended
[Sat May 12 00:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 00:43:17 2012] XMMSAS src. selection expression = ellipse(14033.435547, 30063.562561, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 00:43:17 2012] Writing source region out to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src43_src.reg
[Sat May 12 00:43:17 2012] Extracting stamp from image fullrun_pn_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (124, 309) - (199, 384)
[Sat May 12 00:43:17 2012] XMMSAS bgd. selection expression = annulus(14033.435547, 30063.562561, 1087.500000, 2175.000000, X, Y) && !ellipse(14513.940000, 32669.918000, 1898.128055, 1107.784032, 310.826000, X, Y) && !ellipse(12729.232000, 32569.556000, 2010.344058, 2010.344058, 0.000000, X, Y) && !ellipse(16622.018753, 32148.052612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12491.837921, 31971.623260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13466.430145, 31263.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12390.328186, 31453.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14658.424133, 30848.856506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13449.909225, 30840.564850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12979.925232, 30401.553101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13629.766220, 30330.695679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15801.987732, 27253.009613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15532.152000, 26464.602800, 1742.056050, 1742.056050, 0.000000, X, Y)
[Sat May 12 00:43:17 2012] Writing fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src43.gif
[Sat May 12 03:35:49 2012] Mean detx,y = (10670.22, 6139.58) 
[Sat May 12 03:35:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 03:36:16 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 03:36:17 2012] Setting source spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat May 12 03:36:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun May 13 02:23:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 13 02:23:56 2012] rmf not generated due to insufficient counts
[Tue May 15 01:58:10 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:10 2012] Error reading totcts from fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Tue May 15 01:58:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:20 2012] Using photon index=1.80, rate=0.00246, arf fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src43.arf
[Tue May 15 01:58:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:20 2012] Updating source flux to 1.2e-14
[Tue May 15 02:19:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting