[Sun May  6 01:20:01 2012] Detection parameters:
  Position = (144.1, 368.0) = 17 46 26.88 -28 53 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 462.4 +/- 41.1
  Background counts = 472.9
  Rate = 0.005 +/- 0.0004

[Sun May  6 01:20:19 2012] Off-axis axis estimate = 12.27'
[Sun May  6 01:45:13 2012] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:45:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  6 01:45:13 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Sun May  6 01:45:13 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Sun May  6 01:45:13 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 12.56"
[Sun May  6 14:08:54 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src31.ximg exists
[Sun May  6 14:08:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src31.csv
[Sun May  6 14:08:54 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun May  6 14:08:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src31.csv
[Sun May  6 14:08:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:08:56 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun May  6 14:08:56 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun May  6 14:08:56 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue May  8 12:13:02 2012] Warning, spatial fit 31 centroid is now closest to src. 29
[Tue May  8 12:13:03 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:04 2012] Assessing source extent using major
[Tue May  8 12:13:04 2012] Source does appear to be extended
[Tue May  8 12:13:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:13:04 2012] Source is confused with source 29
[Tue May  8 12:13:04 2012] Source is confused with source 36
[Tue May  8 12:15:59 2012] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Tue May  8 12:15:59 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Tue May  8 12:15:59 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Tue May  8 12:15:59 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 12.56"
[Thu May 10 00:03:59 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src25.ximg exists
[Thu May 10 00:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src25.csv
[Thu May 10 00:03:59 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu May 10 00:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src25.csv
[Thu May 10 00:03:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu May 10 00:04:02 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat May 12 00:41:15 2012] Warning, spatial fit 25 centroid is now closest to src. 29
[Sat May 12 00:41:15 2012] Source 32 is offset by -5.294599 and 0.423831 pixels which is larger than
2 X fitted extent = 1.387825 x 1.387825, not incorporating fit results
[Sat May 12 00:41:16 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:16 2012] Assessing source extent using major
[Sat May 12 00:41:16 2012] Source does appear to be extended
[Sat May 12 00:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 00:43:16 2012] XMMSAS src. selection expression = ellipse(12491.837921, 31971.623260, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 00:43:16 2012] Writing source region out to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src32_src.reg
[Sat May 12 00:43:16 2012] Extracting stamp from image fullrun_pn_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (107, 331) - (182, 406)
[Sat May 12 00:43:16 2012] XMMSAS bgd. selection expression = annulus(12491.837921, 31971.623260, 1087.500000, 2175.000000, X, Y) && !ellipse(13608.994598, 33945.087952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14513.940000, 32669.918000, 1898.128055, 1107.784032, 310.826000, X, Y) && !ellipse(13754.069320, 33212.993820, 693.122420, 693.122420, 0.000000, X, Y) && !ellipse(12729.232000, 32569.556000, 2010.344058, 2010.344058, 0.000000, X, Y) && !ellipse(13466.430145, 31263.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12390.328186, 31453.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14658.424133, 30848.856506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13449.909225, 30840.564850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14033.435547, 30063.562561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12979.925232, 30401.553101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13629.766220, 30330.695679, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 00:43:16 2012] Writing fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src32.gif
[Sat May 12 03:12:26 2012] Mean detx,y = (12082.47, 8084.22) 
[Sat May 12 03:12:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 03:13:02 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 03:13:03 2012] Setting source spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat May 12 03:13:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sun May 13 02:13:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 13 02:13:08 2012] rmf not generated due to insufficient counts
[Tue May 15 01:58:09 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:09 2012] Error reading totcts from fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue May 15 01:58:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:20 2012] Using photon index=1.80, rate=0.00479, arf fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src32.arf
[Tue May 15 01:58:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:20 2012] Updating source flux to 2.8e-14
[Tue May 15 02:19:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting