[Sun May 6 01:20:00 2012] Detection parameters: Position = (159.5, 382.1) = 17 46 21.80 -28 52 54.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 962.3 +/- 52.8 Background counts = 555.3 Rate = 0.01 +/- 0.0005 [Sun May 6 01:20:19 2012] Off-axis axis estimate = 11.76' [Sun May 6 01:45:13 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting [Sun May 6 01:45:13 2012] Initial guess for spatial extent in simple fitting = 12.31" [Sun May 6 01:45:13 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.947 [Sun May 6 01:45:13 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 12.31" [Sun May 6 14:08:54 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src27.ximg exists [Sun May 6 14:08:54 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src27_1.ximg exists [Sun May 6 14:08:54 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src27 appears to have run properly [Sun May 6 14:08:56 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists [Sun May 6 14:08:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src27.csv [Sun May 6 14:08:56 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists [Sun May 6 14:08:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src27.csv [Sun May 6 14:08:56 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 8 12:13:02 2012] Source 28 is offset by -1.017503 and 1.977596 pixels which is larger than 2 X fitted extent = 1.448009 x 1.448009, not incorporating fit results [Tue May 8 12:13:02 2012] Spatial fit model total counts = 6240.280000, observed total counts = 6720.000000 [Tue May 8 12:13:02 2012] Offset between fit and detection position for source 28 = 0.845203 pixels [Tue May 8 12:13:02 2012] 6169.236000 total counts/ 5968.120000 bgd. counts: snr = 2.603322 Spatial fit parameters: Offset between fit and detection position for source 28 = 0.845203 pixels Position = (158.7, 382.3) = 17 46 22.07 -28 52 54.4 Extent = 8.7" x 8.7", rotation angle = 0 Source counts = 201.1 +/- 78.5 Background counts = 5968.1 Rate = 0.002 +/- 0.0009 [Tue May 8 12:13:03 2012] Vigneting correction estimate = 1.000000 [Tue May 8 12:13:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 8 12:13:03 2012] Assessing source extent using major [Tue May 8 12:13:03 2012] Source does appear to be extended [Tue May 8 12:13:03 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 8 12:13:04 2012] Source is confused with source 29 [Tue May 8 12:15:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 8 12:15:59 2012] Initial guess for spatial extent in simple fitting = 8.66" [Tue May 8 12:15:59 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007 [Tue May 8 12:15:59 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.66" [Thu May 10 00:03:59 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src21.ximg exists [Thu May 10 00:03:59 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src21_1.ximg exists [Thu May 10 00:03:59 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src21 appears to have run properly [Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists [Thu May 10 00:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src21.csv [Thu May 10 00:04:02 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists [Thu May 10 00:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src21.csv [Thu May 10 00:04:02 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 12 00:41:15 2012] Warning, spatial fit 21 centroid is now closest to src. 22 [Sat May 12 00:41:15 2012] Spatial fit model total counts = 22639.200000, observed total counts = 17796.000000 [Sat May 12 00:41:15 2012] Poor agreement between spatial fit and data for source 28 It may help to tweak spatial fit manually Not incorporating fit results [Sat May 12 00:41:16 2012] Vigneting correction estimate = 1.000000 [Sat May 12 00:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 12 00:41:16 2012] Assessing source extent using major [Sat May 12 00:41:16 2012] Source does appear to be extended [Sat May 12 00:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 12 00:43:15 2012] XMMSAS src. selection expression = ellipse(13754.069320, 33212.993820, 519.841815, 519.841815, 0.000000, X, Y) [Sat May 12 00:43:15 2012] Writing source region out to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src28_src.reg [Sat May 12 00:43:15 2012] Extracting stamp from image fullrun_pn_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (129, 352) - (189, 412) [Sat May 12 00:43:15 2012] XMMSAS bgd. selection expression = annulus(13754.069320, 33212.993820, 866.403025, 1732.806050, X, Y) && !ellipse(13608.994598, 33945.087952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15611.539825, 33161.955200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14513.940000, 32669.918000, 1898.128055, 1107.784032, 310.826000, X, Y) && !ellipse(12729.232000, 32569.556000, 2010.344058, 2010.344058, 0.000000, X, Y) && !ellipse(12491.837921, 31971.623260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13466.430145, 31263.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12390.328186, 31453.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14658.424133, 30848.856506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13449.909225, 30840.564850, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 12 00:43:15 2012] Writing fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src28.gif [Sat May 12 02:55:16 2012] Mean detx,y = (10802.90, 9264.54) [Sat May 12 02:55:24 2012] Setting backscal keywords in source and bgd. spectrum [Sat May 12 02:55:59 2012] Binned source spectrum to 10 counts/bin [Sat May 12 02:56:00 2012] Setting source spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src28_src_b10.pi.gz [Sat May 12 02:56:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src28_bgd.pi.gz [Tue May 15 01:58:09 2012] Updating aperture counts using extracted products [Tue May 15 01:58:09 2012] Error reading totcts from fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src28_src_b10.pi.gz [Tue May 15 01:58:20 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 15 01:58:20 2012] Using photon index=1.80, rate=0.00239, arf fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src28.arf [Tue May 15 01:58:20 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 15 01:58:20 2012] Updating source flux to 1.5e-14 [Tue May 15 02:19:35 2012] Flag b found in src. 28 procflags, skipping spectral fitting [Tue May 15 02:19:35 2012] Flag p found in src. 28 procflags, skipping spectral fitting [Tue May 15 02:19:35 2012] Flag c found in src. 28 procflags, skipping spectral fitting