[Sun May  6 01:19:55 2012] Detection parameters:
  Position = (298.9, 263.1) = 17 45 35.61 -29 1 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 634044.3 +/- 919.5
  Background counts = 949.3
  Rate = 9 +/- 0.01

[Sun May  6 01:20:19 2012] Off-axis axis estimate = 2.57'
[Sun May  6 01:45:13 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:45:13 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Sun May  6 01:45:13 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Sun May  6 01:45:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.71"
[Sun May  6 14:08:54 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May  6 14:08:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src1.csv
[Sun May  6 14:08:54 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May  6 14:08:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src1.csv
[Sun May  6 14:08:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:08:56 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May  6 14:08:56 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May  6 14:08:56 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May  8 12:13:01 2012] Spatial fit model total counts = 517840.000000, observed total counts = 551260.000000
[Tue May  8 12:13:01 2012] Offset between fit and detection position for source 1 = 0.058531 pixels
[Tue May  8 12:13:01 2012] 511160.000000 total counts/ 25600.000000 bgd. counts: snr = 3034.750000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.058531 pixels
  Position = (298.9, 263.1) = 17 45 35.61 -29 1 33.4
  Extent = 7.2 (7.2-7.2)", rotation angle = 0
  Source counts = 485560.0 +/- 715.0
  Background counts = 25600.0
  Rate = 6 +/- 0.009
[Tue May  8 12:13:03 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:03 2012] Assessing source extent using major axis lower bound
[Tue May  8 12:13:03 2012] Source does appear to be extended
[Tue May  8 12:13:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:15:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  8 12:15:59 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Tue May  8 12:15:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Tue May  8 12:15:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.21"
[Thu May 10 00:03:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 10 00:03:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src1.csv
[Thu May 10 00:03:57 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 10 00:03:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src1.csv
[Thu May 10 00:03:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:04:01 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 10 00:04:01 2012] fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 10 00:04:01 2012] Fit fullrun_pn_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 12 00:41:15 2012] Spatial fit model total counts = 526469.000000, observed total counts = 551343.000000
[Sat May 12 00:41:15 2012] Offset between fit and detection position for source 1 = 0.075434 pixels
[Sat May 12 00:41:15 2012] 518464.000000 total counts/ 25600.000000 bgd. counts: snr = 3080.400000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.075434 pixels
  Position = (299.0, 263.1) = 17 45 35.59 -29 1 33.3
  Extent = 7.5 (7.5-7.5)", rotation angle = 0
  Source counts = 492864.0 +/- 720.0
  Background counts = 25600.0
  Rate = 6 +/- 0.009
[Sat May 12 00:41:16 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:16 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:41:16 2012] Source does appear to be extended
[Sat May 12 00:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 00:41:16 2012] Source is confused with source 2
[Sat May 12 00:43:12 2012] Counts = 492864.000000, rescaling region sizes by 3.000000
[Sat May 12 00:43:12 2012] XMMSAS src. selection expression = ellipse(25962.656416, 22845.332800, 1353.409239, 1353.409239, 0.000000, X, Y)
[Sat May 12 00:43:12 2012] Writing source region out to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src1_src.reg
[Sat May 12 00:43:12 2012] Extracting stamp from image fullrun_pn_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (221, 185) - (377, 341)
[Sat May 12 00:43:13 2012] XMMSAS bgd. selection expression = annulus(25962.656416, 22845.332800, 6767.046195, 13534.092389, X, Y) && !ellipse(24797.492400, 24082.276200, 6979.008201, 3958.200114, 32.072000, X, Y) && !ellipse(24043.320801, 24397.984924, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25698.697052, 23811.863312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.601600, 24627.858000, 3566.640103, 3566.640103, 0.000000, X, Y) && !ellipse(21556.835419, 36940.436249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31723.208099, 35933.959778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35024.909607, 35244.719482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35266.121674, 34756.852539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19480.407364, 34426.593445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37057.082306, 34165.011993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13608.994598, 33945.087952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22044.394379, 33507.305481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24426.906158, 33344.536255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28139.173431, 33172.185028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15611.539825, 33161.955200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14513.940000, 32669.918000, 1898.128055, 1107.784032, 310.826000, X, Y) && !ellipse(21650.601761, 32866.779663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26664.243591, 32556.327087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27506.822449, 32387.414124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13754.069320, 33212.993820, 693.122420, 693.122420, 0.000000, X, Y) && !ellipse(12729.232000, 32569.556000, 2010.344058, 2010.344058, 0.000000, X, Y) && !ellipse(24237.024240, 31950.097040, 693.753620, 693.753620, 0.000000, X, Y) && !ellipse(16622.018753, 32148.052612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12491.837921, 31971.623260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31623.076324, 31398.452881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13466.430145, 31263.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12390.328186, 31453.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33568.886230, 31192.802277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21974.419754, 31353.824493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18214.675247, 30923.736298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.447800, 30337.046000, 1387.640040, 1387.640040, 0.000000, X, Y) && !ellipse(14658.424133, 30848.856506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13449.909225, 30840.564850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14033.435547, 30063.562561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12979.925232, 30401.553101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13629.766220, 30330.695679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18388.383194, 29922.986725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22699.732000, 29199.854000, 1322.976038, 1322.976038, 0.000000, X, Y) && !ellipse(23161.232452, 29367.363434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26743.267883, 29152.112244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22277.890930, 28999.758698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31862.063477, 29019.336884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21129.528366, 28917.394379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25835.470200, 28742.621600, 404.719212, 404.719212, 0.000000, X, Y) && !ellipse(19320.421936, 28562.706360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18687.556000, 28509.102600, 1561.288045, 1561.288045, 0.000000, X, Y) && !ellipse(21822.628000, 28599.900000, 1310.896038, 1310.896038, 0.000000, X, Y) && !ellipse(21221.660538, 28135.254608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.910675, 27615.014893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24239.437195, 27432.391357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25566.606689, 27239.336212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25974.808000, 27020.552000, 867.648025, 404.544012, 126.522400, X, Y) && !ellipse(15801.987732, 27253.009613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22467.950440, 27282.737600, 440.408013, 440.408013, 0.000000, X, Y) && !ellipse(24339.548800, 26853.862000, 489.360814, 489.360814, 0.000000, X, Y) && !ellipse(27807.339905, 26903.700684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26510.201447, 8737.407455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19251.809341, 26666.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37438.171936, 26650.185211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25554.021851, 26385.608887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23379.328400, 26519.681600, 471.667214, 471.667214, 0.000000, X, Y) && !ellipse(15532.152000, 26464.602800, 1742.056050, 1742.056050, 0.000000, X, Y) && !ellipse(24307.188232, 26054.909058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19297.197067, 26052.137207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36857.330280, 26264.947000, 408.121612, 408.121612, 0.000000, X, Y) && !ellipse(28621.037354, 25437.545715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27851.596588, 25349.327057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26561.416000, 25634.060000, 1084.776031, 1084.776031, 0.000000, X, Y) && !ellipse(27316.687836, 24995.894867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17618.902603, 24897.172913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19186.031620, 24202.006600, 591.142417, 591.142417, 0.000000, X, Y) && !ellipse(21218.230240, 24152.800934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27400.448700, 24063.228210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20589.855164, 23733.401886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14559.046387, 23417.049835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22525.164429, 22755.618317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23912.167664, 22484.462830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28432.336456, 22403.165833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22615.246918, 22049.417694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.812805, 21887.466217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19675.408000, 21088.128000, 1886.216054, 1886.216054, 0.000000, X, Y) && !ellipse(14446.007187, 22048.005219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20413.798843, 21842.709061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15901.070770, 21893.751999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21699.101181, 21440.599564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40306.970917, 21336.814468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28119.284607, 21532.253830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24221.279449, 21528.924423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19595.260000, 21236.260000, 925.392027, 925.392027, 0.000000, X, Y) && !ellipse(11875.978653, 20852.271622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20869.849243, 20664.709732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22387.225037, 21094.485962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16936.041016, 20666.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30467.291626, 20636.140289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24441.495544, 20753.081055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23108.360199, 20682.396210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21384.445694, 20492.760742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20024.917200, 20540.898000, 810.272023, 810.272023, 0.000000, X, Y) && !ellipse(21944.636963, 20281.569092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26067.470001, 20136.385452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24404.107422, 19977.935959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20282.004517, 19964.707275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30500.975983, 19776.307724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26085.717800, 19736.401800, 618.804018, 618.804018, 0.000000, X, Y) && !ellipse(26082.994000, 19435.518000, 965.496028, 965.496028, 0.000000, X, Y) && !ellipse(30137.133423, 19188.043503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30765.477966, 19100.730209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22260.221710, 18781.474884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22869.901398, 18700.134079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.244781, 18773.464661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26126.140839, 18480.608292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26500.980800, 9113.996000, 1032.816030, 1032.816030, 0.000000, X, Y) && !ellipse(26688.460114, 17683.127762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26188.799530, 17613.802292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17331.429306, 17059.125519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26202.366730, 16997.340332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30760.454651, 16989.989883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32581.812714, 16478.673721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22817.122070, 16249.875244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26230.085236, 16131.602982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27399.938934, 16117.280426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38970.503510, 15889.231995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19837.179581, 15809.227997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21603.995377, 15421.061386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29564.085175, 15240.608337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26259.391449, 15264.346954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26302.894104, 14300.877975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20316.688492, 14091.948410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23669.543121, 13527.672379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26325.196350, 13873.027969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26351.120056, 13089.601837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26379.773132, 12653.691162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.521271, 12219.138535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26412.355652, 11869.240189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29960.074829, 11801.714828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26447.447174, 11172.390579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24554.244019, 10624.801407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26482.968811, 9957.637016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26530.382200, 8364.842000, 1157.032033, 1157.032033, 0.000000, X, Y)
[Sat May 12 00:43:13 2012] Writing fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src1.gif
[Sat May 12 00:47:05 2012] Mean detx,y = (-947.27, -1606.01) 
[Sat May 12 00:47:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 00:56:14 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 00:56:14 2012] Setting source spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 12 00:56:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 15 01:58:07 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:07 2012] Error reading totcts from fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 15 01:58:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:18 2012] Using photon index=1.80, rate=5.86, arf fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src1.arf
[Tue May 15 01:58:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:18 2012] Updating source flux to 1.6e-11
[Tue May 15 02:19:35 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue May 15 02:30:04 2012] Reading fit data from xmm0505670101/analysis//spectral/fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src1_pl.csv
[Tue May 15 02:30:04 2012] Spectral fit parameter nH value = 2.2236e+23
[Tue May 15 02:30:04 2012] Spectral fit parameter PhoIndex value = 2.68554
[Tue May 15 02:30:04 2012] Failed to get F(0.3-8.0) from xmm0505670101/analysis//spectral/fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue May 15 02:30:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 02:30:04 2012] Using Nh = 2.2e+23, photon index=2.69, rate=5.86, arf fullrun_pn_xmm0505670101_pi300-10000_pass1_cl_src1.arf
[Tue May 15 02:30:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 02:30:04 2012] Updating source flux to 7.1e-11