[Sun May  6 01:20:38 2012] Detection parameters:
  Position = (159.1, 382.1) = 17 46 21.90 -28 52 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 491.1 +/- 35.6
  Background counts = 206.7
  Rate = 0.005 +/- 0.0004

[Sun May  6 01:20:52 2012] Off-axis axis estimate = 11.78'
[Mon May  7 05:17:43 2012] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Mon May  7 05:17:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 05:17:43 2012] Initial guess for spatial extent in simple fitting = 12.32"
[Mon May  7 05:17:43 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.811
[Mon May  7 05:17:43 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 12.32"
[Tue May  8 12:11:59 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src19.ximg exists
[Tue May  8 12:11:59 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue May  8 12:11:59 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src19 appears to have run properly
[Tue May  8 12:12:02 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue May  8 12:12:02 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue May  8 12:12:02 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue May  8 12:14:39 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.897794 pixels away
[Tue May  8 12:14:40 2012] Spatial fit model total counts = 3438.670000, observed total counts = 3426.000000
[Tue May  8 12:14:40 2012] Offset between fit and detection position for source 9 = 1.871601 pixels
[Tue May  8 12:14:40 2012] Warning, changing simple spatial fit ID from 19 to 47
[Tue May  8 12:14:40 2012] 3304.120000 total counts/ 2015.550000 bgd. counts: snr = 28.701938
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.871601 pixels
  Position = (157.3, 382.1) = 17 46 22.53 -28 52 55.3
  Extent = 24.9 (20.7-49.9)", rotation angle = 0
  Source counts = 1288.6 +/- 57.5
  Background counts = 2015.5
  Rate = 0.01 +/- 0.0006
[Tue May  8 12:14:41 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:14:41 2012] Assessing source extent using major axis lower bound
[Tue May  8 12:14:41 2012] Source does appear to be extended
[Tue May  8 12:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:14:41 2012] Source is confused with source 8
[Tue May  8 12:14:41 2012] Source is confused with source 12
[Fri May 11 06:42:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:42:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 11 06:42:20 2012] Initial guess for spatial extent in simple fitting = 24.95"
[Fri May 11 06:42:20 2012] source mask rpix=5.7, npix_max = 155, mask sum = 144, frac = 0.926
[Fri May 11 06:42:20 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 24.95"
[Sat May 12 00:40:30 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src19.ximg exists
[Sat May 12 00:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src19.csv
[Sat May 12 00:40:30 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat May 12 00:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src19.csv
[Sat May 12 00:40:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat May 12 00:40:32 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat May 12 00:42:22 2012] Spatial fit model total counts = 12593.700000, observed total counts = 12569.000000
[Sat May 12 00:42:22 2012] Offset between fit and detection position for source 9 = 2.833329 pixels
[Sat May 12 00:42:22 2012] 12538.610000 total counts/ 10623.100000 bgd. counts: snr = 18.584838
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.833329 pixels
  Position = (157.7, 384.9) = 17 46 22.37 -28 52 43.2
  Extent = 24.7 (22.6-28.0)", rotation angle = 0
  Source counts = 1915.5 +/- 112.0
  Background counts = 10623.1
  Rate = 0.02 +/- 0.001
[Sat May 12 00:42:23 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:42:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:42:23 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:42:23 2012] Source does appear to be extended
[Sat May 12 00:42:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 21:03:31 2012] Counts = 1915.510000, rescaling region sizes by 2.000000
[Mon May 14 21:03:31 2012] XMMSAS src. selection expression = ellipse(13675.209600, 33438.346000, 2961.300085, 2961.300085, 0.000000, X, Y)
[Mon May 14 21:03:31 2012] Writing source region out to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src9_src.reg
[Mon May 14 21:03:31 2012] Extracting stamp from image fullrun_mos2_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (0, 215) - (328, 555)
[Mon May 14 21:03:31 2012] XMMSAS bgd. selection expression = annulus(13675.209600, 33438.346000, 9871.000284, 19742.000568, X, Y) && !ellipse(25965.698084, 22840.719600, 1946.680856, 1946.680856, 0.000000, X, Y) && !ellipse(24784.848000, 24169.692000, 771.017622, 771.017622, 0.000000, X, Y) && !ellipse(23745.001709, 24827.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23824.872955, 24475.171936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.355377, 23114.758820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22101.402000, 37498.158000, 507.104015, 507.104015, 0.000000, X, Y) && !ellipse(23395.894400, 26524.639200, 424.330412, 424.330412, 0.000000, X, Y) && !ellipse(26801.187347, 22321.067017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27439.238678, 16224.340500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23389.628600, 25557.788000, 1198.120034, 1198.120034, 0.000000, X, Y) && !ellipse(24077.674225, 23185.008240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25745.642000, 24637.300000, 1088.400031, 1088.400031, 0.000000, X, Y) && !ellipse(25837.758600, 28737.840400, 365.550411, 365.550411, 0.000000, X, Y) && !ellipse(26806.117737, 21522.147461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24660.747864, 19350.808746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24356.837280, 26128.429474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26738.164917, 17505.575333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24274.934937, 26827.612854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13567.048000, 33953.556060, 461.624013, 234.635207, 313.338100, X, Y) && !ellipse(25060.279327, 26124.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23718.549652, 22316.064941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23805.939180, 18778.176000, 286.959208, 286.959208, 0.000000, X, Y) && !ellipse(21795.394000, 28694.704000, 635.904818, 635.904818, 0.000000, X, Y) && !ellipse(16588.890625, 32144.370087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21339.176117, 19955.844788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24196.019501, 21540.639740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19851.455673, 15798.087494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15912.294907, 21898.321304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21623.584183, 15389.093506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16307.427343, 28200.029400, 345.000810, 345.000810, 0.000000, X, Y) && !ellipse(27876.612274, 25432.588776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21464.306320, 37028.907135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22030.790009, 33528.277557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26899.402000, 25661.238000, 1128.528032, 1128.528032, 0.000000, X, Y) && !ellipse(15986.144547, 32999.833801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13869.917603, 30118.657074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13074.314178, 32670.111023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14423.958496, 22051.691727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19912.274000, 21084.677820, 1522.904044, 1522.904044, 0.000000, X, Y) && !ellipse(21691.335520, 21820.330000, 1438.056041, 1438.056041, 0.000000, X, Y) && !ellipse(20940.732000, 29077.486000, 1441.056041, 1441.056041, 0.000000, X, Y) && !ellipse(15621.506805, 21021.451416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26145.421661, 15261.052063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19259.946200, 28553.884200, 1024.752029, 1024.752029, 0.000000, X, Y) && !ellipse(26621.882599, 26479.331421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27937.539600, 26945.419800, 953.144027, 953.144027, 0.000000, X, Y) && !ellipse(9437.240654, 29257.742584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21708.489365, 21440.233170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21937.788315, 31339.211212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15252.861298, 27439.220093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15251.909470, 26241.403625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30741.426056, 19085.763809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17611.342466, 24865.159800, 482.929614, 482.929614, 0.000000, X, Y) && !ellipse(31905.308594, 29021.455597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28088.762390, 33158.745270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13480.078323, 30996.553131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19027.102264, 29656.381958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18506.624000, 28242.712000, 1537.880044, 1537.880044, 0.000000, X, Y) && !ellipse(20909.216400, 29257.684000, 1415.456041, 1415.456041, 0.000000, X, Y) && !ellipse(19298.224564, 26669.099640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18414.583200, 30006.815800, 744.115221, 744.115221, 0.000000, X, Y) && !ellipse(20237.558380, 19856.485060, 1511.848044, 1511.848044, 0.000000, X, Y) && !ellipse(25538.460724, 26484.330841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.472000, 25714.786000, 1163.216033, 1163.216033, 0.000000, X, Y) && !ellipse(21774.638000, 28603.854000, 1263.736036, 1263.736036, 0.000000, X, Y) && !ellipse(22821.922000, 20701.365000, 1421.248041, 1421.248041, 0.000000, X, Y) && !ellipse(21587.067800, 30001.458000, 1158.424033, 1158.424033, 0.000000, X, Y) && !ellipse(15783.012238, 37303.970825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13205.108887, 31429.984009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22271.954285, 20249.003830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26241.154053, 27591.371857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12543.624000, 32018.946000, 1995.048057, 1995.048057, 0.000000, X, Y) && !ellipse(26985.746399, 40009.177521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9521.959984, 24918.474213, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 14 21:03:31 2012] Writing fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src9.gif
[Mon May 14 21:43:17 2012] Mean detx,y = (-10538.38, -9400.87) 
[Mon May 14 21:43:20 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 14 21:49:47 2012] Binned source spectrum to 10 counts/bin
[Mon May 14 21:49:47 2012] Setting source spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 14 21:49:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue May 15 01:58:39 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:39 2012] Error reading totcts from fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue May 15 01:58:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:43 2012] Using photon index=1.80, rate=0.0197, arf fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src9.arf
[Tue May 15 01:58:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:43 2012] Updating source flux to 3.3e-13
[Tue May 15 02:09:18 2012] Flag c found in src. 9 procflags, skipping spectral fitting