[Sun May  6 01:20:43 2012] Detection parameters:
  Position = (255.7, 244.1) = 17 45 49.93 -29 2 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.8 +/- 31.1
  Background counts = 299.6
  Rate = 0.003 +/- 0.0004

[Sun May  6 01:20:52 2012] Off-axis axis estimate = 5.01'
[Mon May  7 05:17:43 2012] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Mon May  7 05:17:43 2012] Initial guess for spatial extent in simple fitting = 8.93"
[Mon May  7 05:17:43 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Mon May  7 05:17:43 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.93"
[Tue May  8 12:11:59 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src33.ximg exists
[Tue May  8 12:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src33.csv
[Tue May  8 12:11:59 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue May  8 12:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src33.csv
[Tue May  8 12:11:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:12:03 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue May  8 12:12:03 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue May  8 12:12:03 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue May  8 12:14:40 2012] Spatial fit model total counts = 4399.330000, observed total counts = 4395.000000
[Tue May  8 12:14:40 2012] Offset between fit and detection position for source 56 = 0.427056 pixels
[Tue May  8 12:14:40 2012] 4445.953100 total counts/ 4396.820000 bgd. counts: snr = 0.740977
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.427056 pixels
  Position = (255.4, 243.8) = 17 45 50.03 -29 2 57.6
  Extent = 2.5 (2.2-4.8)", rotation angle = 0
  Source counts = 49.1 +/- 66.7
  Background counts = 4396.8
  Rate = 0.0005 +/- 0.0007
  Deleting source due to low Poisson probability