[Sun May  6 01:20:42 2012] Detection parameters:
  Position = (142.1, 380.7) = 17 46 27.56 -28 53 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.0 +/- 24.3
  Background counts = 175.4
  Rate = 0.001 +/- 0.0002

[Sun May  6 01:20:52 2012] Off-axis axis estimate = 12.81'
[Mon May  7 05:17:43 2012] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Mon May  7 05:17:43 2012] Initial guess for spatial extent in simple fitting = 12.83"
[Mon May  7 05:17:43 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.029
[Mon May  7 05:17:43 2012] Giving source the simple spatial ID 101 for pass 0, mean size = 12.83"
[Tue May  8 12:14:41 2012] Spatial fit model total counts = 2849.850000, observed total counts = 2810.000000
[Tue May  8 12:14:41 2012] Offset between fit and detection position for source 44 = 8.631408 pixels
[Tue May  8 12:14:41 2012] Warning, changing simple spatial fit ID from 101 to 95
[Tue May  8 12:14:41 2012] 2857.262000 total counts/ 2502.290000 bgd. counts: snr = 7.096191
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 8.631408 pixels
  Position = (142.0, 372.1) = 17 46 27.58 -28 53 38.9
  Extent = 24.4 (24.3-48.8)", rotation angle = 0
  Source counts = 355.0 +/- 53.5
  Background counts = 2502.3
  Rate = 0.004 +/- 0.0005
[Tue May  8 12:14:41 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:14:41 2012] Assessing source extent using major axis lower bound
[Tue May  8 12:14:41 2012] Source does appear to be extended
[Tue May  8 12:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:14:41 2012] Source is confused with source 12
[Tue May  8 12:14:41 2012] Source is confused with source 45
[Fri May 11 06:42:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:42:20 2012] Initial guess for spatial extent in simple fitting = 24.40"
[Fri May 11 06:42:20 2012] source mask rpix=5.6, npix_max = 149, mask sum = 144, frac = 0.964
[Fri May 11 06:42:20 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 24.40"
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src85.ximg exists
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src85_1.ximg exists
[Sat May 12 00:40:32 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src85 appears to have run properly
[Sat May 12 00:40:34 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Sat May 12 00:40:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src85.csv
[Sat May 12 00:40:34 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Sat May 12 00:40:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src85.csv
[Sat May 12 00:40:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:42:23 2012] Spatial fit model total counts = 3434.240000, observed total counts = 3426.000000
[Sat May 12 00:42:23 2012] Offset between fit and detection position for source 44 = 4.409014 pixels
[Sat May 12 00:42:23 2012] Warning, changing simple spatial fit ID from 85 to 44
[Sat May 12 00:42:23 2012] 3454.470000 total counts/ 2129.080000 bgd. counts: snr = 28.724184
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 4.409014 pixels
  Position = (144.7, 368.6) = 17 46 26.68 -28 53 54.0
  Extent = 24.9 (24.9-24.9)", rotation angle = 0
  Source counts = 1325.4 +/- 58.8
  Background counts = 2129.1
  Rate = 0.01 +/- 0.0006
[Sat May 12 00:42:23 2012] Spatial fit model total counts = 9277.660000, observed total counts = 8375.000000
[Sat May 12 00:42:23 2012] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 12 00:42:23 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:42:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:42:23 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:42:23 2012] Source does appear to be extended
[Sat May 12 00:42:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 21:03:33 2012] Counts = 1325.390000, rescaling region sizes by 2.000000
[Mon May 14 21:03:33 2012] XMMSAS src. selection expression = ellipse(12543.624000, 32018.946000, 2992.572086, 2992.572086, 0.000000, X, Y)
[Mon May 14 21:03:33 2012] Writing source region out to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src44_src.reg
[Mon May 14 21:03:33 2012] Extracting stamp from image fullrun_mos2_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (0, 197) - (317, 541)
[Mon May 14 21:03:33 2012] XMMSAS bgd. selection expression = annulus(12543.624000, 32018.946000, 9975.240287, 19950.480574, X, Y) && !ellipse(25965.698084, 22840.719600, 1946.680856, 1946.680856, 0.000000, X, Y) && !ellipse(24784.848000, 24169.692000, 771.017622, 771.017622, 0.000000, X, Y) && !ellipse(23745.001709, 24827.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23824.872955, 24475.171936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.355377, 23114.758820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22101.402000, 37498.158000, 507.104015, 507.104015, 0.000000, X, Y) && !ellipse(23395.894400, 26524.639200, 424.330412, 424.330412, 0.000000, X, Y) && !ellipse(26801.187347, 22321.067017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27439.238678, 16224.340500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23389.628600, 25557.788000, 1198.120034, 1198.120034, 0.000000, X, Y) && !ellipse(24077.674225, 23185.008240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25745.642000, 24637.300000, 1088.400031, 1088.400031, 0.000000, X, Y) && !ellipse(25837.758600, 28737.840400, 365.550411, 365.550411, 0.000000, X, Y) && !ellipse(26806.117737, 21522.147461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24660.747864, 19350.808746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24356.837280, 26128.429474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26738.164917, 17505.575333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13675.209600, 33438.346000, 1974.200057, 1974.200057, 0.000000, X, Y) && !ellipse(24274.934937, 26827.612854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13567.048000, 33953.556060, 461.624013, 234.635207, 313.338100, X, Y) && !ellipse(25060.279327, 26124.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23718.549652, 22316.064941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23805.939180, 18778.176000, 286.959208, 286.959208, 0.000000, X, Y) && !ellipse(21795.394000, 28694.704000, 635.904818, 635.904818, 0.000000, X, Y) && !ellipse(16588.890625, 32144.370087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21339.176117, 19955.844788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24196.019501, 21540.639740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19851.455673, 15798.087494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15912.294907, 21898.321304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21623.584183, 15389.093506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16307.427343, 28200.029400, 345.000810, 345.000810, 0.000000, X, Y) && !ellipse(27876.612274, 25432.588776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21464.306320, 37028.907135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22030.790009, 33528.277557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26899.402000, 25661.238000, 1128.528032, 1128.528032, 0.000000, X, Y) && !ellipse(15986.144547, 32999.833801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13869.917603, 30118.657074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13074.314178, 32670.111023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14423.958496, 22051.691727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19912.274000, 21084.677820, 1522.904044, 1522.904044, 0.000000, X, Y) && !ellipse(21691.335520, 21820.330000, 1438.056041, 1438.056041, 0.000000, X, Y) && !ellipse(20940.732000, 29077.486000, 1441.056041, 1441.056041, 0.000000, X, Y) && !ellipse(15621.506805, 21021.451416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26145.421661, 15261.052063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19259.946200, 28553.884200, 1024.752029, 1024.752029, 0.000000, X, Y) && !ellipse(26621.882599, 26479.331421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27937.539600, 26945.419800, 953.144027, 953.144027, 0.000000, X, Y) && !ellipse(9437.240654, 29257.742584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21708.489365, 21440.233170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21937.788315, 31339.211212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15252.861298, 27439.220093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15251.909470, 26241.403625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30741.426056, 19085.763809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17611.342466, 24865.159800, 482.929614, 482.929614, 0.000000, X, Y) && !ellipse(31905.308594, 29021.455597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28088.762390, 33158.745270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13480.078323, 30996.553131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19027.102264, 29656.381958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18506.624000, 28242.712000, 1537.880044, 1537.880044, 0.000000, X, Y) && !ellipse(20909.216400, 29257.684000, 1415.456041, 1415.456041, 0.000000, X, Y) && !ellipse(19298.224564, 26669.099640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18414.583200, 30006.815800, 744.115221, 744.115221, 0.000000, X, Y) && !ellipse(20237.558380, 19856.485060, 1511.848044, 1511.848044, 0.000000, X, Y) && !ellipse(25538.460724, 26484.330841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.472000, 25714.786000, 1163.216033, 1163.216033, 0.000000, X, Y) && !ellipse(21774.638000, 28603.854000, 1263.736036, 1263.736036, 0.000000, X, Y) && !ellipse(22821.922000, 20701.365000, 1421.248041, 1421.248041, 0.000000, X, Y) && !ellipse(21587.067800, 30001.458000, 1158.424033, 1158.424033, 0.000000, X, Y) && !ellipse(15783.012238, 37303.970825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13205.108887, 31429.984009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22271.954285, 20249.003830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26241.154053, 27591.371857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26985.746399, 40009.177521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9521.959984, 24918.474213, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 14 21:03:33 2012] Writing fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src44.gif
[Mon May 14 22:39:27 2012] Mean detx,y = (-11269.20, -8256.46) 
[Mon May 14 22:39:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 14 22:47:29 2012] Binned source spectrum to 10 counts/bin
[Mon May 14 22:47:29 2012] Setting source spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Mon May 14 22:47:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue May 15 01:58:42 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:42 2012] Error reading totcts from fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue May 15 01:58:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:45 2012] Using photon index=1.80, rate=0.0136, arf fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src44.arf
[Tue May 15 01:58:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:45 2012] Updating source flux to 2.4e-13
[Tue May 15 02:09:18 2012] Flag p found in src. 44 procflags, skipping spectral fitting
[Tue May 15 02:09:18 2012] Flag c found in src. 44 procflags, skipping spectral fitting