[Sun May  6 01:20:37 2012] Detection parameters:
  Position = (273.5, 285.9) = 17 45 44.04 -28 59 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4205.4 +/- 87.9
  Background counts = 434.2
  Rate = 0.05 +/- 0.0009

[Sun May  6 01:20:52 2012] Off-axis axis estimate = 2.02'
[Mon May  7 05:17:43 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Mon May  7 05:17:43 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Mon May  7 05:17:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.023
[Mon May  7 05:17:43 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.44"
[Tue May  8 12:11:58 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src3.ximg exists
[Tue May  8 12:11:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src3.csv
[Tue May  8 12:11:58 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May  8 12:11:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src3.csv
[Tue May  8 12:11:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:12:01 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May  8 12:12:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue May  8 12:12:01 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May  8 12:12:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue May  8 12:12:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:14:39 2012] Spatial fit model total counts = 21040.300000, observed total counts = 17942.000000
[Tue May  8 12:14:39 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  8 12:14:39 2012] Spatial fit model total counts = 22681.200000, observed total counts = 19984.000000
[Tue May  8 12:14:39 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  8 12:14:41 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:14:41 2012] Assessing source extent using major
[Tue May  8 12:14:41 2012] Source does appear to be extended
[Tue May  8 12:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:14:41 2012] Source is confused with source 3
[Fri May 11 06:42:20 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Fri May 11 06:42:20 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Fri May 11 06:42:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.023
[Fri May 11 06:42:20 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.44"
[Sat May 12 00:40:30 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src3.ximg exists
[Sat May 12 00:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src3.csv
[Sat May 12 00:40:30 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat May 12 00:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src3.csv
[Sat May 12 00:40:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat May 12 00:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat May 12 00:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat May 12 00:40:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:42:22 2012] Spatial fit model total counts = 20775.600000, observed total counts = 17942.000000
[Sat May 12 00:42:22 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 12 00:42:22 2012] Spatial fit model total counts = 22709.400000, observed total counts = 19984.000000
[Sat May 12 00:42:22 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 12 00:42:23 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:42:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:42:23 2012] Assessing source extent using major
[Sat May 12 00:42:23 2012] Source does appear to be extended
[Sat May 12 00:42:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 21:03:30 2012] Counts = 4205.447266, rescaling region sizes by 2.000000
[Mon May 14 21:03:30 2012] XMMSAS src. selection expression = ellipse(23745.001709, 24827.584595, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 14 21:03:30 2012] Writing source region out to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src4_src.reg
[Mon May 14 21:03:30 2012] Extracting stamp from image fullrun_mos2_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (198, 211) - (348, 361)
[Mon May 14 21:03:30 2012] XMMSAS bgd. selection expression = annulus(23745.001709, 24827.584595, 4350.000000, 8700.000000, X, Y) && !ellipse(25965.698084, 22840.719600, 1946.680856, 1946.680856, 0.000000, X, Y) && !ellipse(24784.848000, 24169.692000, 771.017622, 771.017622, 0.000000, X, Y) && !ellipse(23824.872955, 24475.171936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.355377, 23114.758820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23395.894400, 26524.639200, 424.330412, 424.330412, 0.000000, X, Y) && !ellipse(26801.187347, 22321.067017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27439.238678, 16224.340500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23389.628600, 25557.788000, 1198.120034, 1198.120034, 0.000000, X, Y) && !ellipse(24077.674225, 23185.008240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25745.642000, 24637.300000, 1088.400031, 1088.400031, 0.000000, X, Y) && !ellipse(25837.758600, 28737.840400, 365.550411, 365.550411, 0.000000, X, Y) && !ellipse(26806.117737, 21522.147461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24660.747864, 19350.808746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24356.837280, 26128.429474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26738.164917, 17505.575333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13675.209600, 33438.346000, 1974.200057, 1974.200057, 0.000000, X, Y) && !ellipse(24274.934937, 26827.612854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.279327, 26124.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23718.549652, 22316.064941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23805.939180, 18778.176000, 286.959208, 286.959208, 0.000000, X, Y) && !ellipse(21795.394000, 28694.704000, 635.904818, 635.904818, 0.000000, X, Y) && !ellipse(16588.890625, 32144.370087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21339.176117, 19955.844788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24196.019501, 21540.639740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19851.455673, 15798.087494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15912.294907, 21898.321304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21623.584183, 15389.093506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16307.427343, 28200.029400, 345.000810, 345.000810, 0.000000, X, Y) && !ellipse(27876.612274, 25432.588776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22030.790009, 33528.277557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26899.402000, 25661.238000, 1128.528032, 1128.528032, 0.000000, X, Y) && !ellipse(15986.144547, 32999.833801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14423.958496, 22051.691727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19912.274000, 21084.677820, 1522.904044, 1522.904044, 0.000000, X, Y) && !ellipse(21691.335520, 21820.330000, 1438.056041, 1438.056041, 0.000000, X, Y) && !ellipse(20940.732000, 29077.486000, 1441.056041, 1441.056041, 0.000000, X, Y) && !ellipse(15621.506805, 21021.451416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26145.421661, 15261.052063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19259.946200, 28553.884200, 1024.752029, 1024.752029, 0.000000, X, Y) && !ellipse(26621.882599, 26479.331421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27937.539600, 26945.419800, 953.144027, 953.144027, 0.000000, X, Y) && !ellipse(21708.489365, 21440.233170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21937.788315, 31339.211212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15252.861298, 27439.220093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15251.909470, 26241.403625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30741.426056, 19085.763809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17611.342466, 24865.159800, 482.929614, 482.929614, 0.000000, X, Y) && !ellipse(31905.308594, 29021.455597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28088.762390, 33158.745270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19027.102264, 29656.381958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18506.624000, 28242.712000, 1537.880044, 1537.880044, 0.000000, X, Y) && !ellipse(20909.216400, 29257.684000, 1415.456041, 1415.456041, 0.000000, X, Y) && !ellipse(19298.224564, 26669.099640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18414.583200, 30006.815800, 744.115221, 744.115221, 0.000000, X, Y) && !ellipse(20237.558380, 19856.485060, 1511.848044, 1511.848044, 0.000000, X, Y) && !ellipse(25538.460724, 26484.330841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.472000, 25714.786000, 1163.216033, 1163.216033, 0.000000, X, Y) && !ellipse(21774.638000, 28603.854000, 1263.736036, 1263.736036, 0.000000, X, Y) && !ellipse(22821.922000, 20701.365000, 1421.248041, 1421.248041, 0.000000, X, Y) && !ellipse(21587.067800, 30001.458000, 1158.424033, 1158.424033, 0.000000, X, Y) && !ellipse(22271.954285, 20249.003830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26241.154053, 27591.371857, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 14 21:03:30 2012] Writing fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src4.gif
[Mon May 14 21:13:35 2012] Mean detx,y = (-846.49, -446.76) 
[Mon May 14 21:13:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 14 21:15:56 2012] Binned source spectrum to 10 counts/bin
[Mon May 14 21:15:56 2012] Setting source spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 14 21:15:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May 14 23:06:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 14 23:06:53 2012] rmf not generated due to insufficient counts
[Tue May 15 01:58:38 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:38 2012] Error reading totcts from fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 15 01:58:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:42 2012] Using photon index=1.80, rate=0.0453, arf fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src4.arf
[Tue May 15 01:58:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:42 2012] Updating source flux to 4.1e-13
[Tue May 15 02:09:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting