[Sun May  6 01:20:40 2012] Detection parameters:
  Position = (277.3, 267.1) = 17 45 42.77 -29 1 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 694.0 +/- 42.9
  Background counts = 409.6
  Rate = 0.009 +/- 0.0006

[Sun May  6 01:20:52 2012] Off-axis axis estimate = 2.74'
[Mon May  7 05:17:43 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Mon May  7 05:17:43 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Mon May  7 05:17:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.571
[Mon May  7 05:17:43 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.80"
[Tue May  8 12:11:58 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src11.ximg exists
[Tue May  8 12:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src11.csv
[Tue May  8 12:11:59 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue May  8 12:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src11.csv
[Tue May  8 12:11:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:12:02 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue May  8 12:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue May  8 12:12:02 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue May  8 12:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue May  8 12:12:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:14:39 2012] Warning, spatial fit 11 centroid is now closest to src. 30
[Tue May  8 12:14:39 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 13.082594 pixels away
[Tue May  8 12:14:41 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:14:41 2012] Assessing source extent using major
[Tue May  8 12:14:41 2012] Source does appear to be extended
[Tue May  8 12:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 06:42:20 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Fri May 11 06:42:20 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Fri May 11 06:42:20 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.571
[Fri May 11 06:42:20 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.80"
[Sat May 12 00:40:30 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src11.ximg exists
[Sat May 12 00:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src11.csv
[Sat May 12 00:40:30 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat May 12 00:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src11.csv
[Sat May 12 00:40:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat May 12 00:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat May 12 00:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat May 12 00:40:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:42:22 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.630329 pixels away
[Sat May 12 00:42:23 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:42:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:42:23 2012] Assessing source extent using major
[Sat May 12 00:42:23 2012] Source does appear to be extended
[Sat May 12 00:42:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 21:03:30 2012] XMMSAS src. selection expression = ellipse(24077.674225, 23185.008240, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 14 21:03:30 2012] Writing source region out to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src27_src.reg
[Mon May 14 21:03:30 2012] Extracting stamp from image fullrun_mos2_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (240, 230) - (315, 305)
[Mon May 14 21:03:30 2012] XMMSAS bgd. selection expression = annulus(24077.674225, 23185.008240, 1087.500000, 2175.000000, X, Y) && !ellipse(25965.698084, 22840.719600, 1946.680856, 1946.680856, 0.000000, X, Y) && !ellipse(24784.848000, 24169.692000, 771.017622, 771.017622, 0.000000, X, Y) && !ellipse(23745.001709, 24827.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23824.872955, 24475.171936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.355377, 23114.758820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26801.187347, 22321.067017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23389.628600, 25557.788000, 1198.120034, 1198.120034, 0.000000, X, Y) && !ellipse(25745.642000, 24637.300000, 1088.400031, 1088.400031, 0.000000, X, Y) && !ellipse(26806.117737, 21522.147461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24356.837280, 26128.429474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.279327, 26124.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23718.549652, 22316.064941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24196.019501, 21540.639740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26899.402000, 25661.238000, 1128.528032, 1128.528032, 0.000000, X, Y) && !ellipse(21691.335520, 21820.330000, 1438.056041, 1438.056041, 0.000000, X, Y) && !ellipse(21708.489365, 21440.233170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22821.922000, 20701.365000, 1421.248041, 1421.248041, 0.000000, X, Y) && !ellipse(22271.954285, 20249.003830, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 14 21:03:30 2012] Writing fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src27.gif
[Mon May 14 21:38:35 2012] Mean detx,y = (-667.89, 1006.42) 
[Mon May 14 21:38:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 14 21:38:47 2012] Binned source spectrum to 10 counts/bin
[Mon May 14 21:38:47 2012] Setting source spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon May 14 21:38:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon May 14 23:40:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 14 23:40:55 2012] rmf not generated due to insufficient counts
[Tue May 15 01:58:39 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:39 2012] Error reading totcts from fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue May 15 01:58:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:43 2012] Using photon index=1.80, rate=0.00909, arf fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src27.arf
[Tue May 15 01:58:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:43 2012] Updating source flux to 1e-13
[Tue May 15 02:09:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting