[Sun May  6 01:20:39 2012] Detection parameters:
  Position = (302.4, 288.9) = 17 45 34.46 -28 59 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 781.3 +/- 49.0
  Background counts = 386.0
  Rate = 0.008 +/- 0.0005

[Sun May  6 01:20:52 2012] Off-axis axis estimate = 0.75'
[Mon May  7 05:17:43 2012] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Mon May  7 05:17:43 2012] Initial guess for spatial extent in simple fitting = 6.80"
[Mon May  7 05:17:43 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.939
[Mon May  7 05:17:43 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 6.80"
[Tue May  8 12:11:59 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src12.ximg exists
[Tue May  8 12:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src12.csv
[Tue May  8 12:11:59 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue May  8 12:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src12.csv
[Tue May  8 12:11:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:12:02 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue May  8 12:12:02 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue May  8 12:12:02 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue May  8 12:14:39 2012] Spatial fit model total counts = 9563.500000, observed total counts = 9570.000000
[Tue May  8 12:14:39 2012] Offset between fit and detection position for source 26 = 7.833397 pixels
[Tue May  8 12:14:39 2012] 9468.879000 total counts/ 8633.390000 bgd. counts: snr = 8.991871
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 7.833397 pixels
  Position = (296.5, 283.7) = 17 45 36.42 -29 0 3.7
  Extent = 13.6 (13.6-27.2)", rotation angle = 0
  Source counts = 835.5 +/- 97.3
  Background counts = 8633.4
  Rate = 0.009 +/- 0.001
[Tue May  8 12:14:41 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:14:41 2012] Assessing source extent using major axis lower bound
[Tue May  8 12:14:41 2012] Source does appear to be extended
[Tue May  8 12:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 06:42:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:42:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 11 06:42:20 2012] Initial guess for spatial extent in simple fitting = 13.61"
[Fri May 11 06:42:20 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.931
[Fri May 11 06:42:20 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 13.61"
[Sat May 12 00:40:30 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src12.ximg exists
[Sat May 12 00:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src12.csv
[Sat May 12 00:40:30 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat May 12 00:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src12.csv
[Sat May 12 00:40:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat May 12 00:40:32 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat May 12 00:42:22 2012] Warning, spatial fit 12 centroid is now closest to src. 2
[Sat May 12 00:42:23 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:42:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:42:23 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:42:23 2012] Source does appear to be extended
[Sat May 12 00:42:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 21:03:30 2012] XMMSAS src. selection expression = ellipse(25745.642000, 24637.300000, 816.300023, 816.300023, 0.000000, X, Y)
[Mon May 14 21:03:30 2012] Writing source region out to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src26_src.reg
[Mon May 14 21:03:30 2012] Extracting stamp from image fullrun_mos2_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (250, 237) - (343, 331)
[Mon May 14 21:03:30 2012] XMMSAS bgd. selection expression = annulus(25745.642000, 24637.300000, 1360.500039, 2721.000078, X, Y) && !ellipse(25965.698084, 22840.719600, 1946.680856, 1946.680856, 0.000000, X, Y) && !ellipse(24784.848000, 24169.692000, 771.017622, 771.017622, 0.000000, X, Y) && !ellipse(23745.001709, 24827.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23824.872955, 24475.171936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.355377, 23114.758820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23395.894400, 26524.639200, 424.330412, 424.330412, 0.000000, X, Y) && !ellipse(26801.187347, 22321.067017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23389.628600, 25557.788000, 1198.120034, 1198.120034, 0.000000, X, Y) && !ellipse(24077.674225, 23185.008240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26806.117737, 21522.147461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24356.837280, 26128.429474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24274.934937, 26827.612854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.279327, 26124.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23718.549652, 22316.064941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24196.019501, 21540.639740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27876.612274, 25432.588776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26899.402000, 25661.238000, 1128.528032, 1128.528032, 0.000000, X, Y) && !ellipse(21691.335520, 21820.330000, 1438.056041, 1438.056041, 0.000000, X, Y) && !ellipse(26621.882599, 26479.331421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27937.539600, 26945.419800, 953.144027, 953.144027, 0.000000, X, Y) && !ellipse(25538.460724, 26484.330841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.472000, 25714.786000, 1163.216033, 1163.216033, 0.000000, X, Y) && !ellipse(21774.638000, 28603.854000, 1263.736036, 1263.736036, 0.000000, X, Y) && !ellipse(22821.922000, 20701.365000, 1421.248041, 1421.248041, 0.000000, X, Y) && !ellipse(26241.154053, 27591.371857, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 14 21:03:30 2012] Writing fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src26.gif
[Mon May 14 21:39:12 2012] Mean detx,y = (905.52, -218.09) 
[Mon May 14 21:39:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 14 21:39:35 2012] Binned source spectrum to 10 counts/bin
[Mon May 14 21:39:35 2012] Setting source spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon May 14 21:39:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue May 15 01:58:39 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:39 2012] Error reading totcts from fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue May 15 01:58:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:43 2012] Using photon index=1.80, rate=0.00858, arf fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src26.arf
[Tue May 15 01:58:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:43 2012] Updating source flux to 9.2e-14