[Sun May  6 01:20:39 2012] Detection parameters:
  Position = (424.4, 302.3) = 17 44 54.01 -28 58 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 446.8 +/- 28.4
  Background counts = 77.8
  Rate = 0.005 +/- 0.0003

[Sun May  6 01:20:52 2012] Off-axis axis estimate = 9.14'
[Mon May  7 05:17:43 2012] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Mon May  7 05:17:43 2012] Initial guess for spatial extent in simple fitting = 11.00"
[Mon May  7 05:17:43 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.982
[Mon May  7 05:17:43 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 11.00"
[Tue May  8 12:11:59 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src22.ximg exists
[Tue May  8 12:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src22.csv
[Tue May  8 12:11:59 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue May  8 12:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src22.csv
[Tue May  8 12:11:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:12:02 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue May  8 12:12:02 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue May  8 12:12:02 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Tue May  8 12:14:39 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.502694 pixels away
[Tue May  8 12:14:41 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:14:41 2012] Assessing source extent using major
[Tue May  8 12:14:41 2012] Source does appear to be extended
[Tue May  8 12:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 06:42:20 2012] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Fri May 11 06:42:20 2012] Initial guess for spatial extent in simple fitting = 11.00"
[Fri May 11 06:42:20 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.982
[Fri May 11 06:42:20 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 11.00"
[Sat May 12 00:40:30 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src22.ximg exists
[Sat May 12 00:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src22.csv
[Sat May 12 00:40:30 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat May 12 00:40:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src22.csv
[Sat May 12 00:40:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat May 12 00:40:32 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sat May 12 00:42:22 2012] Spatial fit model total counts = 1189.980000, observed total counts = 1190.000000
[Sat May 12 00:42:22 2012] Offset between fit and detection position for source 23 = 0.273783 pixels
[Sat May 12 00:42:22 2012] 1190.416000 total counts/ 913.169000 bgd. counts: snr = 9.174687
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.273783 pixels
  Position = (424.2, 302.4) = 17 44 54.08 -28 58 42.0
  Extent = 5.0 (4.3-5.8)", rotation angle = 0
  Source counts = 277.2 +/- 34.5
  Background counts = 913.2
  Rate = 0.003 +/- 0.0004
[Sat May 12 00:42:23 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:42:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:42:23 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:42:23 2012] Source does appear to be extended
[Sat May 12 00:42:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 21:03:31 2012] XMMSAS src. selection expression = ellipse(36855.431100, 26263.466600, 301.162809, 301.162809, 0.000000, X, Y)
[Mon May 14 21:03:31 2012] Writing source region out to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src23_src.reg
[Mon May 14 21:03:31 2012] Extracting stamp from image fullrun_mos2_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (407, 285) - (441, 320)
[Mon May 14 21:03:31 2012] XMMSAS bgd. selection expression = annulus(36855.431100, 26263.466600, 501.938014, 1003.876029, X, Y)
[Mon May 14 21:03:31 2012] Writing fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src23.gif
[Mon May 14 21:52:39 2012] Mean detx,y = (12128.46, -1628.83) 
[Mon May 14 21:52:41 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 14 21:52:56 2012] Binned source spectrum to 10 counts/bin
[Mon May 14 21:52:56 2012] Setting source spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon May 14 21:52:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue May 15 01:58:40 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:40 2012] Error reading totcts from fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue May 15 01:58:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:43 2012] Using photon index=1.80, rate=0.00285, arf fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src23.arf
[Tue May 15 01:58:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:43 2012] Updating source flux to 8.1e-14