[Sun May  6 01:20:51 2012] Detection parameters:
  Position = (233.4, 228.2) = 17 45 57.34 -29 3 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.8 +/- 24.6
  Background counts = 223.3
  Rate = 0.002 +/- 0.0003

[Sun May  6 01:20:52 2012] Off-axis axis estimate = 6.94'
[Mon May  7 05:17:43 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Mon May  7 05:17:43 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Mon May  7 05:17:43 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.973
[Mon May  7 05:17:43 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 9.90"
[Tue May  8 12:12:00 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src83.ximg exists
[Tue May  8 12:12:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src83.csv
[Tue May  8 12:12:00 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src83_1.ximg exists
[Tue May  8 12:12:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src83.csv
[Tue May  8 12:12:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:12:05 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Tue May  8 12:12:05 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Tue May  8 12:12:05 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Tue May  8 12:14:41 2012] Spatial fit model total counts = 2790.130000, observed total counts = 2790.000000
[Tue May  8 12:14:41 2012] Offset between fit and detection position for source 118 = 0.687012 pixels
[Tue May  8 12:14:41 2012] 2818.023000 total counts/ 2404.690000 bgd. counts: snr = 8.428893
Spatial fit parameters:
  Offset between fit and detection position for source 118 = 0.687012 pixels
  Position = (233.2, 228.8) = 17 45 57.42 -29 4 2.6
  Extent = 18.9 (17.1-19.8)", rotation angle = 0
  Source counts = 413.3 +/- 53.1
  Background counts = 2404.7
  Rate = 0.004 +/- 0.0005
[Tue May  8 12:14:41 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:14:41 2012] Assessing source extent using major axis lower bound
[Tue May  8 12:14:41 2012] Source does appear to be extended
[Tue May  8 12:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:14:41 2012] Source is confused with source 37
[Fri May 11 06:42:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 06:42:20 2012] Initial guess for spatial extent in simple fitting = 18.90"
[Fri May 11 06:42:20 2012] source mask rpix=4.3, npix_max = 93, mask sum = 100, frac = 1.065
[Fri May 11 06:42:20 2012] Giving source the simple spatial ID 74 for pass 1, mean size = 18.90"
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src74.ximg exists
[Sat May 12 00:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src74.csv
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src74_1.ximg exists
[Sat May 12 00:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src74.csv
[Sat May 12 00:40:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:40:33 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Sat May 12 00:40:33 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Sat May 12 00:40:33 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly
[Sat May 12 00:42:23 2012] Warning, spatial fit 74 centroid is now closest to src. 37
[Sat May 12 00:42:23 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:42:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:42:23 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:42:23 2012] Source does appear to be extended
[Sat May 12 00:42:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 21:03:32 2012] XMMSAS src. selection expression = ellipse(20237.558380, 19856.485060, 1133.886033, 1133.886033, 0.000000, X, Y)
[Mon May 14 21:03:32 2012] Writing source region out to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src118_src.reg
[Mon May 14 21:03:32 2012] Extracting stamp from image fullrun_mos2_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (168, 164) - (298, 294)
[Mon May 14 21:03:32 2012] XMMSAS bgd. selection expression = annulus(20237.558380, 19856.485060, 1889.810054, 3779.620109, X, Y) && !ellipse(24784.848000, 24169.692000, 771.017622, 771.017622, 0.000000, X, Y) && !ellipse(23824.872955, 24475.171936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24077.674225, 23185.008240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24660.747864, 19350.808746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23718.549652, 22316.064941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23805.939180, 18778.176000, 286.959208, 286.959208, 0.000000, X, Y) && !ellipse(21339.176117, 19955.844788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24196.019501, 21540.639740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19851.455673, 15798.087494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15912.294907, 21898.321304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21623.584183, 15389.093506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19912.274000, 21084.677820, 1522.904044, 1522.904044, 0.000000, X, Y) && !ellipse(21691.335520, 21820.330000, 1438.056041, 1438.056041, 0.000000, X, Y) && !ellipse(15621.506805, 21021.451416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21708.489365, 21440.233170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22821.922000, 20701.365000, 1421.248041, 1421.248041, 0.000000, X, Y) && !ellipse(22271.954285, 20249.003830, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 14 21:03:32 2012] Writing fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src118.gif
[Mon May 14 22:32:50 2012] Mean detx,y = (-4666.42, 4177.58) 
[Mon May 14 22:32:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 14 22:33:47 2012] Binned source spectrum to 10 counts/bin
[Mon May 14 22:33:47 2012] Setting source spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src118_src_b10.pi.gz
[Mon May 14 22:33:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src118_bgd.pi.gz
[Tue May 15 01:58:42 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:42 2012] Error reading totcts from fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src118_src_b10.pi.gz
[Tue May 15 01:58:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:45 2012] Using photon index=1.80, rate=0.00425, arf fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src118.arf
[Tue May 15 01:58:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:45 2012] Updating source flux to 5.4e-14
[Tue May 15 02:09:18 2012] Flag c found in src. 118 procflags, skipping spectral fitting