[Sun May  6 01:20:51 2012] Detection parameters:
  Position = (256.6, 233.3) = 17 45 49.66 -29 3 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.5 +/- 25.6
  Background counts = 260.5
  Rate = 0.001 +/- 0.0003

[Sun May  6 01:20:52 2012] Off-axis axis estimate = 5.61'
[Mon May  7 05:17:43 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Mon May  7 05:17:43 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Mon May  7 05:17:43 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.908
[Mon May  7 05:17:43 2012] Giving source the simple spatial ID 96 for pass 0, mean size = 9.24"
[Tue May  8 12:12:00 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src96.ximg exists
[Tue May  8 12:12:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src96.csv
[Tue May  8 12:12:00 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src96_1.ximg exists
[Tue May  8 12:12:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src96.csv
[Tue May  8 12:12:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:12:05 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Tue May  8 12:12:05 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Tue May  8 12:12:05 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src96 appears to have run properly
[Tue May  8 12:14:41 2012] Source 117 is offset by -2.549422 and -7.799312 pixels which is larger than
2 X fitted extent = 2.546818 x 2.546818, not incorporating fit results
[Tue May  8 12:14:41 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:14:41 2012] Assessing source extent using major
[Tue May  8 12:14:41 2012] Source does appear to be extended
[Tue May  8 12:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:14:41 2012] Source is confused with source 113
[Fri May 11 06:42:20 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Fri May 11 06:42:20 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Fri May 11 06:42:20 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.908
[Fri May 11 06:42:20 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 9.24"
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src83.ximg exists
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src83_1.ximg exists
[Sat May 12 00:40:32 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src83 appears to have run properly
[Sat May 12 00:40:34 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Sat May 12 00:40:34 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Sat May 12 00:40:34 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Sat May 12 00:42:23 2012] Warning, spatial fit 83 centroid is now closest to src. 113
[Sat May 12 00:42:23 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:42:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:42:23 2012] Assessing source extent using major
[Sat May 12 00:42:23 2012] Source does appear to be extended
[Sat May 12 00:42:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 21:03:33 2012] XMMSAS src. selection expression = ellipse(22271.954285, 20249.003830, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 14 21:03:33 2012] Writing source region out to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src117_src.reg
[Mon May 14 21:03:33 2012] Extracting stamp from image fullrun_mos2_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (219, 196) - (294, 271)
[Mon May 14 21:03:33 2012] XMMSAS bgd. selection expression = annulus(22271.954285, 20249.003830, 1087.500000, 2175.000000, X, Y) && !ellipse(25965.698084, 22840.719600, 1946.680856, 1946.680856, 0.000000, X, Y) && !ellipse(24077.674225, 23185.008240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24660.747864, 19350.808746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23718.549652, 22316.064941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23805.939180, 18778.176000, 286.959208, 286.959208, 0.000000, X, Y) && !ellipse(21339.176117, 19955.844788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24196.019501, 21540.639740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19912.274000, 21084.677820, 1522.904044, 1522.904044, 0.000000, X, Y) && !ellipse(21691.335520, 21820.330000, 1438.056041, 1438.056041, 0.000000, X, Y) && !ellipse(21708.489365, 21440.233170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20237.558380, 19856.485060, 1511.848044, 1511.848044, 0.000000, X, Y) && !ellipse(22821.922000, 20701.365000, 1421.248041, 1421.248041, 0.000000, X, Y)
[Mon May 14 21:03:33 2012] Writing fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src117.gif
[Mon May 14 22:37:41 2012] Mean detx,y = (-2638.98, 3898.94) 
[Mon May 14 22:37:44 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 14 22:38:00 2012] Binned source spectrum to 10 counts/bin
[Mon May 14 22:38:01 2012] Setting source spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src117_src_b10.pi.gz
[Mon May 14 22:38:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src117_bgd.pi.gz
[Tue May 15 01:48:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 01:48:36 2012] rmf not generated due to insufficient counts
[Tue May 15 01:58:42 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:42 2012] Error reading totcts from fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src117_src_b10.pi.gz
[Tue May 15 01:58:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:45 2012] Using photon index=1.80, rate=0.00144, arf fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src117.arf
[Tue May 15 01:58:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:45 2012] Updating source flux to 1.9e-14
[Tue May 15 02:09:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting