[Sun May  6 01:20:50 2012] Detection parameters:
  Position = (408.9, 273.0) = 17 44 59.13 -29 0 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.0 +/- 18.1
  Background counts = 90.0
  Rate = 0.001 +/- 0.0002

[Sun May  6 01:20:52 2012] Off-axis axis estimate = 8.22'
[Mon May  7 05:17:43 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Mon May  7 05:17:43 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Mon May  7 05:17:43 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.054
[Mon May  7 05:17:43 2012] Giving source the simple spatial ID 104 for pass 0, mean size = 10.54"
[Tue May  8 12:14:41 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:14:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:14:41 2012] Assessing source extent using major
[Tue May  8 12:14:41 2012] Source does appear to be extended
[Tue May  8 12:14:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 06:42:20 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Fri May 11 06:42:20 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Fri May 11 06:42:20 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.054
[Fri May 11 06:42:20 2012] Giving source the simple spatial ID 87 for pass 1, mean size = 10.54"
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src87.ximg exists
[Sat May 12 00:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src87.csv
[Sat May 12 00:40:32 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src87_1.ximg exists
[Sat May 12 00:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src87.csv
[Sat May 12 00:40:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:40:34 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Sat May 12 00:40:34 2012] fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Sat May 12 00:40:34 2012] Fit fullrun_mos2_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src87 appears to have run properly
[Sat May 12 00:42:23 2012] Warning: source 87 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 105 at 14.465824 pixels away
[Sat May 12 00:42:23 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:42:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:42:23 2012] Assessing source extent using major
[Sat May 12 00:42:23 2012] Source does appear to be extended
[Sat May 12 00:42:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 21:03:33 2012] XMMSAS src. selection expression = ellipse(35528.834167, 23703.368195, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 14 21:03:33 2012] Writing source region out to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src105_src.reg
[Mon May 14 21:03:33 2012] Extracting stamp from image fullrun_mos2_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (371, 236) - (446, 311)
[Mon May 14 21:03:33 2012] XMMSAS bgd. selection expression = annulus(35528.834167, 23703.368195, 1087.500000, 2175.000000, X, Y) && !ellipse(36855.431100, 26263.466600, 401.550412, 401.550412, 0.000000, X, Y)
[Mon May 14 21:03:33 2012] Writing fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src105.gif
[Mon May 14 22:48:07 2012] Mean detx,y = (10713.38, 881.19) 
[Mon May 14 22:48:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 14 22:48:16 2012] Binned source spectrum to 10 counts/bin
[Mon May 14 22:48:16 2012] Setting source spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Mon May 14 22:48:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src105_bgd.pi.gz
[Tue May 15 01:54:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 01:54:38 2012] rmf not generated due to insufficient counts
[Tue May 15 01:58:42 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:42 2012] Error reading totcts from fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Tue May 15 01:58:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:45 2012] Using photon index=1.80, rate=0.00121, arf fullrun_mos2_xmm0505670101_pi300-10000_pass1_cl_src105.arf
[Tue May 15 01:58:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:45 2012] Updating source flux to 2.6e-14
[Tue May 15 02:09:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting