[Sun May  6 01:20:28 2012] Detection parameters:
  Position = (375.1, 190.7) = 17 45 10.32 -29 6 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.0 +/- 21.8
  Background counts = 115.3
  Rate = 0.002 +/- 0.0002

[Sun May  6 01:20:35 2012] Off-axis axis estimate = 9.59'
[Sun May  6 14:08:58 2012] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Sun May  6 14:08:58 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.949
[Sun May  6 14:08:58 2012] Giving source the simple spatial ID 97 for pass 0, mean size = 11.22"
[Mon May  7 05:17:40 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src97.ximg exists
[Mon May  7 05:17:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src97.csv
[Mon May  7 05:17:40 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src97_1.ximg exists
[Mon May  7 05:17:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src97.csv
[Mon May  7 05:17:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 05:17:43 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Mon May  7 05:17:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src97.csv
[Mon May  7 05:17:43 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Mon May  7 05:17:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src97.csv
[Mon May  7 05:17:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:13:54 2012] Source 60 is offset by 6.888353 and -7.113481 pixels which is larger than
2 X fitted extent = 0.846630 x 0.846630, not incorporating fit results
[Tue May  8 12:13:54 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:54 2012] Assessing source extent using major
[Tue May  8 12:13:54 2012] Source does appear to be extended
[Tue May  8 12:13:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:04:05 2012] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:04:05 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Thu May 10 00:04:05 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.949
[Thu May 10 00:04:05 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 11.22"
[Fri May 11 06:42:17 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src85.ximg exists
[Fri May 11 06:42:17 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src85_1.ximg exists
[Fri May 11 06:42:17 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src85 appears to have run properly
[Fri May 11 06:42:20 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Fri May 11 06:42:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src85.csv
[Fri May 11 06:42:20 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Fri May 11 06:42:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src85.csv
[Fri May 11 06:42:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:41:54 2012] Warning: source 85 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 14.888539 pixels away
[Sat May 12 00:41:54 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:54 2012] Assessing source extent using major
[Sat May 12 00:41:54 2012] Source does appear to be extended
[Sat May 12 00:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 13 06:12:05 2012] XMMSAS src. selection expression = ellipse(32586.530701, 16538.883148, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 13 06:12:05 2012] Writing source region out to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src60_src.reg
[Sun May 13 06:12:05 2012] Extracting stamp from image fullrun_mos1_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (338, 153) - (413, 228)
[Sun May 13 06:12:05 2012] XMMSAS bgd. selection expression = annulus(32586.530701, 16538.883148, 1087.500000, 2175.000000, X, Y) && !ellipse(24051.066000, 24400.946000, 7141.776206, 7141.776206, 0.000000, X, Y) && !ellipse(28140.786000, 25738.206000, 10091.136290, 10091.136290, 0.000000, X, Y)
[Sun May 13 06:12:05 2012] Writing fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src60.gif
[Sun May 13 09:11:34 2012] Mean detx,y = (8240.40, -7696.46) 
[Sun May 13 09:11:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 13 09:12:27 2012] Binned source spectrum to 10 counts/bin
[Sun May 13 09:12:28 2012] Setting source spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sun May 13 09:12:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon May 14 05:24:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 14 05:24:02 2012] rmf not generated due to insufficient counts
[Tue May 15 01:58:32 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:32 2012] Error reading totcts from fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Tue May 15 01:58:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:37 2012] Using photon index=1.80, rate=0.00174, arf fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src60.arf
[Tue May 15 01:58:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:38 2012] Updating source flux to 3.5e-14
[Tue May 15 01:58:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting