[Sun May  6 01:20:27 2012] Detection parameters:
  Position = (246.8, 227.2) = 17 45 52.89 -29 3 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 342.1 +/- 26.7
  Background counts = 223.6
  Rate = 0.005 +/- 0.0004

[Sun May  6 01:20:35 2012] Off-axis axis estimate = 6.37'
[Sun May  6 14:08:58 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Sun May  6 14:08:58 2012] source mask rpix=2.2, npix_max = 29, mask sum = 26, frac = 0.885
[Sun May  6 14:08:58 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 9.62"
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src22.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src22.csv
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src22.csv
[Mon May  7 05:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon May  7 05:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon May  7 05:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Mon May  7 05:17:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:13:52 2012] Warning, spatial fit 22 centroid is now closest to src. 125
[Tue May  8 12:13:54 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:54 2012] Assessing source extent using major
[Tue May  8 12:13:54 2012] Source does appear to be extended
[Tue May  8 12:13:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:04:04 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:04:04 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Thu May 10 00:04:04 2012] source mask rpix=2.2, npix_max = 29, mask sum = 26, frac = 0.885
[Thu May 10 00:04:04 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 9.62"
[Fri May 11 06:42:15 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src19.ximg exists
[Fri May 11 06:42:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src19.csv
[Fri May 11 06:42:15 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri May 11 06:42:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src19.csv
[Fri May 11 06:42:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:42:18 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri May 11 06:42:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May 11 06:42:18 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri May 11 06:42:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May 11 06:42:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:41:53 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 15.245326 pixels away
[Sat May 12 00:41:54 2012] Source 56 is offset by -2.362560 and -0.939922 pixels which is larger than
2 X fitted extent = 1.664023 x 1.664023, not incorporating fit results
[Sat May 12 00:41:54 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:54 2012] Assessing source extent using major
[Sat May 12 00:41:54 2012] Source does appear to be extended
[Sat May 12 00:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 13 06:11:54 2012] XMMSAS src. selection expression = ellipse(21425.297302, 19722.066803, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 13 06:11:54 2012] Writing source region out to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src56_src.reg
[Sun May 13 06:11:54 2012] Extracting stamp from image fullrun_mos1_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (209, 190) - (284, 265)
[Sun May 13 06:11:54 2012] XMMSAS bgd. selection expression = annulus(21425.297302, 19722.066803, 1087.500000, 2175.000000, X, Y) && !ellipse(25809.271057, 22760.044250, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24051.066000, 24400.946000, 7141.776206, 7141.776206, 0.000000, X, Y) && !ellipse(21733.669662, 20741.126785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23010.738000, 23211.454000, 1345.512039, 1345.512039, 0.000000, X, Y) && !ellipse(20944.846000, 22009.116200, 1955.696056, 1955.696056, 0.000000, X, Y) && !ellipse(23798.261800, 18826.657400, 478.563214, 478.563214, 0.000000, X, Y) && !ellipse(24017.756000, 22659.138000, 2528.736073, 2528.736073, 0.000000, X, Y) && !ellipse(22197.608000, 21260.088000, 1472.104042, 1472.104042, 0.000000, X, Y) && !ellipse(19125.631000, 20632.028000, 1589.720046, 432.684812, 359.854000, X, Y) && !ellipse(19571.201401, 21433.539841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20686.630000, 23037.709600, 1592.384046, 1592.384046, 0.000000, X, Y) && !ellipse(22997.864000, 20784.946000, 1420.208041, 1420.208041, 0.000000, X, Y) && !ellipse(19920.360000, 20831.466000, 648.032019, 648.032019, 0.000000, X, Y) && !ellipse(22732.899231, 19787.547791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21730.010000, 22068.458000, 2691.024077, 2691.024077, 0.000000, X, Y) && !ellipse(22602.964000, 21840.382000, 1329.072038, 1329.072038, 0.000000, X, Y) && !ellipse(22810.258000, 20915.493600, 1420.072041, 821.912024, 213.674000, X, Y) && !ellipse(22657.750000, 22852.844000, 1272.632037, 1272.632037, 0.000000, X, Y) && !ellipse(20472.423218, 20642.515015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20743.762000, 22726.098000, 1435.120041, 1435.120041, 0.000000, X, Y) && !ellipse(21381.320000, 20942.482000, 1597.248046, 798.136823, 0.000000, X, Y) && !ellipse(28140.786000, 25738.206000, 10091.136290, 10091.136290, 0.000000, X, Y)
[Sun May 13 06:11:54 2012] Writing fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src56.gif
[Sun May 13 07:27:15 2012] Mean detx,y = (4568.68, 3347.52) 
[Sun May 13 07:27:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 13 07:28:06 2012] Binned source spectrum to 10 counts/bin
[Sun May 13 07:28:07 2012] Setting source spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sun May 13 07:28:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Mon May 14 01:26:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 14 01:26:31 2012] rmf not generated due to insufficient counts
[Tue May 15 01:58:27 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:27 2012] Error reading totcts from fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Tue May 15 01:58:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:33 2012] Using photon index=1.80, rate=0.00483, arf fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src56.arf
[Tue May 15 01:58:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:34 2012] Updating source flux to 6e-14
[Tue May 15 01:58:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting