[Sun May  6 01:20:27 2012] Detection parameters:
  Position = (295.5, 236.8) = 17 45 36.73 -29 3 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 315.8 +/- 32.4
  Background counts = 206.1
  Rate = 0.005 +/- 0.0005

[Sun May  6 01:20:35 2012] Off-axis axis estimate = 4.47'
[Sun May  6 14:08:58 2012] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Sun May  6 14:08:58 2012] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.684
[Sun May  6 14:08:58 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.66"
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src19.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src19.csv
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src19.csv
[Mon May  7 05:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon May  7 05:17:41 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue May  8 12:13:52 2012] Source 54 is offset by -5.210344 and -6.802188 pixels which is larger than
2 X fitted extent = 5.134621 x 5.134621, not incorporating fit results
[Tue May  8 12:13:52 2012] Spatial fit model total counts = 3163.740000, observed total counts = 2761.000000
[Tue May  8 12:13:52 2012] Poor agreement between spatial fit and data for source 54
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  8 12:13:54 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:54 2012] Assessing source extent using major
[Tue May  8 12:13:54 2012] Source does appear to be extended
[Tue May  8 12:13:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:13:54 2012] Source is confused with source 55
[Tue May  8 12:13:54 2012] Source is confused with source 123
[Thu May 10 00:04:04 2012] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:04:04 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Thu May 10 00:04:04 2012] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.684
[Thu May 10 00:04:04 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.66"
[Fri May 11 06:42:15 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src17.ximg exists
[Fri May 11 06:42:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src17.csv
[Fri May 11 06:42:15 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri May 11 06:42:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src17.csv
[Fri May 11 06:42:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:42:18 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri May 11 06:42:18 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri May 11 06:42:18 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat May 12 00:41:53 2012] Warning, spatial fit 17 centroid is now closest to src. 123
[Sat May 12 00:41:54 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 54 at 18.788311 pixels away
[Sat May 12 00:41:54 2012] Spatial fit model total counts = 2580.500000, observed total counts = 2498.000000
[Sat May 12 00:41:54 2012] Offset between fit and detection position for source 54 = 3.158626 pixels
[Sat May 12 00:41:54 2012] Warning, changing simple spatial fit ID from 17 to 43
[Sat May 12 00:41:54 2012] 1633.995000 total counts/ 868.125000 bgd. counts: snr = 25.993450
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 3.158626 pixels
  Position = (296.1, 233.7) = 17 45 36.55 -29 3 41.4
  Extent = 14.6 (12.2-16.8)", rotation angle = 0
  Source counts = 765.9 +/- 40.4
  Background counts = 868.1
  Rate = 0.008 +/- 0.0004
[Sat May 12 00:41:54 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:54 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:41:54 2012] Source does appear to be extended
[Sat May 12 00:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 13 06:11:54 2012] XMMSAS src. selection expression = ellipse(25710.308600, 20283.588000, 878.508025, 878.508025, 0.000000, X, Y)
[Sun May 13 06:11:54 2012] Writing source region out to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src54_src.reg
[Sun May 13 06:11:54 2012] Extracting stamp from image fullrun_mos1_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (246, 183) - (347, 284)
[Sun May 13 06:11:54 2012] XMMSAS bgd. selection expression = annulus(25710.308600, 20283.588000, 1464.180042, 2928.360084, X, Y) && !ellipse(25949.510040, 22885.001400, 1652.781648, 1652.781648, 0.000000, X, Y) && !ellipse(25809.271057, 22760.044250, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24051.066000, 24400.946000, 7141.776206, 7141.776206, 0.000000, X, Y) && !ellipse(25633.664764, 24050.603546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26671.730774, 22670.134338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25870.265045, 22410.175110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.777405, 23986.341217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23010.738000, 23211.454000, 1345.512039, 1345.512039, 0.000000, X, Y) && !ellipse(20944.846000, 22009.116200, 1955.696056, 1955.696056, 0.000000, X, Y) && !ellipse(23798.261800, 18826.657400, 478.563214, 478.563214, 0.000000, X, Y) && !ellipse(24017.756000, 22659.138000, 2528.736073, 2528.736073, 0.000000, X, Y) && !ellipse(26712.156000, 17669.457000, 497.320014, 497.320014, 0.000000, X, Y) && !ellipse(22197.608000, 21260.088000, 1472.104042, 1472.104042, 0.000000, X, Y) && !ellipse(25101.552000, 20018.973600, 1425.784041, 1425.784041, 0.000000, X, Y) && !ellipse(22997.864000, 20784.946000, 1420.208041, 1420.208041, 0.000000, X, Y) && !ellipse(25781.453800, 19877.304000, 1386.392040, 1386.392040, 0.000000, X, Y) && !ellipse(22732.899231, 19787.547791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21730.010000, 22068.458000, 2691.024077, 2691.024077, 0.000000, X, Y) && !ellipse(27965.128000, 20331.746000, 1377.592040, 1377.592040, 0.000000, X, Y) && !ellipse(22602.964000, 21840.382000, 1329.072038, 1329.072038, 0.000000, X, Y) && !ellipse(22810.258000, 20915.493600, 1420.072041, 821.912024, 213.674000, X, Y) && !ellipse(26980.040000, 19981.870200, 1431.344041, 1431.344041, 0.000000, X, Y) && !ellipse(22657.750000, 22852.844000, 1272.632037, 1272.632037, 0.000000, X, Y) && !ellipse(27003.528000, 19832.586000, 1431.344041, 1431.344041, 0.000000, X, Y) && !ellipse(21381.320000, 20942.482000, 1597.248046, 798.136823, 0.000000, X, Y) && !ellipse(27815.212000, 21107.678000, 823.616024, 823.616024, 0.000000, X, Y) && !ellipse(28140.786000, 25738.206000, 10091.136290, 10091.136290, 0.000000, X, Y) && !ellipse(28548.106354, 23439.707855, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 13 06:11:54 2012] Writing fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src54.gif
[Sun May 13 07:25:26 2012] Mean detx,y = (4060.96, -969.16) 
[Sun May 13 07:25:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 13 07:25:58 2012] Binned source spectrum to 10 counts/bin
[Sun May 13 07:25:58 2012] Setting source spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Sun May 13 07:25:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Tue May 15 01:58:27 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:27 2012] Error reading totcts from fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue May 15 01:58:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:33 2012] Using photon index=1.80, rate=0.00787, arf fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src54.arf
[Tue May 15 01:58:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:33 2012] Updating source flux to 1.1e-13
[Tue May 15 01:58:49 2012] Flag b found in src. 54 procflags, skipping spectral fitting
[Tue May 15 01:58:49 2012] Flag p found in src. 54 procflags, skipping spectral fitting
[Tue May 15 01:58:49 2012] Flag c found in src. 54 procflags, skipping spectral fitting