[Sun May  6 01:20:27 2012] Detection parameters:
  Position = (222.2, 238.9) = 17 46 1.06 -29 3 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.5 +/- 29.3
  Background counts = 219.4
  Rate = 0.004 +/- 0.0006

[Sun May  6 01:20:35 2012] Off-axis axis estimate = 7.01'
[Sun May  6 14:08:58 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Sun May  6 14:08:58 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.968
[Sun May  6 14:08:58 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 9.94"
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src36.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src36.csv
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src36_1.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src36.csv
[Mon May  7 05:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Mon May  7 05:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Mon May  7 05:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Mon May  7 05:17:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 12:13:52 2012] Spatial fit model total counts = 2626.930000, observed total counts = 2278.000000
[Tue May  8 12:13:52 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  8 12:13:54 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:54 2012] Assessing source extent using major
[Tue May  8 12:13:54 2012] Source does appear to be extended
[Tue May  8 12:13:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:13:54 2012] Source is confused with source 118
[Thu May 10 00:04:04 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:04:04 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Thu May 10 00:04:04 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.968
[Thu May 10 00:04:04 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 9.94"
[Fri May 11 06:42:16 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src32.ximg exists
[Fri May 11 06:42:16 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src32_1.ximg exists
[Fri May 11 06:42:16 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src32 appears to have run properly
[Fri May 11 06:42:18 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Fri May 11 06:42:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri May 11 06:42:18 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Fri May 11 06:42:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri May 11 06:42:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 00:41:54 2012] Spatial fit model total counts = 2442.270000, observed total counts = 2278.000000
[Sat May 12 00:41:54 2012] Offset between fit and detection position for source 53 = 2.148284 pixels
[Sat May 12 00:41:54 2012] 2242.855000 total counts/ 2048.480000 bgd. counts: snr = 4.294618
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 2.148284 pixels
  Position = (220.4, 237.7) = 17 46 1.66 -29 3 23.8
  Extent = 19.9 (13.9-39.7)" x 5.4 (3.6-7.3)", rotation angle = 360 (360-0) degrees
  Source counts = 194.4 +/- 47.4
  Background counts = 2048.5
  Rate = 0.002 +/- 0.0005
[Sat May 12 00:41:54 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:54 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:41:54 2012] Source does appear to be extended
[Sat May 12 00:41:54 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.90
[Sat May 12 00:41:54 2012] Source is asymmetric
[Sun May 13 06:11:55 2012] XMMSAS src. selection expression = ellipse(19125.631000, 20632.028000, 1192.290034, 324.513609, 359.854000, X, Y)
[Sun May 13 06:11:55 2012] Writing source region out to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src53_src.reg
[Sun May 13 06:11:55 2012] Extracting stamp from image fullrun_mos1_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (152, 169) - (289, 306)
[Sun May 13 06:11:55 2012] XMMSAS bgd. selection expression = annulus(19125.631000, 20632.028000, 1987.150057, 3974.300114, X, Y) && !ellipse(24051.066000, 24400.946000, 7141.776206, 7141.776206, 0.000000, X, Y) && !ellipse(21733.669662, 20741.126785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23010.738000, 23211.454000, 1345.512039, 1345.512039, 0.000000, X, Y) && !ellipse(20944.846000, 22009.116200, 1955.696056, 1955.696056, 0.000000, X, Y) && !ellipse(21425.297302, 19722.066803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24017.756000, 22659.138000, 2528.736073, 2528.736073, 0.000000, X, Y) && !ellipse(22197.608000, 21260.088000, 1472.104042, 1472.104042, 0.000000, X, Y) && !ellipse(19571.201401, 21433.539841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15970.256851, 21874.428696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20686.630000, 23037.709600, 1592.384046, 1592.384046, 0.000000, X, Y) && !ellipse(22997.864000, 20784.946000, 1420.208041, 1420.208041, 0.000000, X, Y) && !ellipse(19920.360000, 20831.466000, 648.032019, 648.032019, 0.000000, X, Y) && !ellipse(22732.899231, 19787.547791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21730.010000, 22068.458000, 2691.024077, 2691.024077, 0.000000, X, Y) && !ellipse(14434.137878, 22029.714722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22602.964000, 21840.382000, 1329.072038, 1329.072038, 0.000000, X, Y) && !ellipse(22810.258000, 20915.493600, 1420.072041, 821.912024, 213.674000, X, Y) && !ellipse(22657.750000, 22852.844000, 1272.632037, 1272.632037, 0.000000, X, Y) && !ellipse(20472.423218, 20642.515015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17389.506744, 17025.114594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20743.762000, 22726.098000, 1435.120041, 1435.120041, 0.000000, X, Y) && !ellipse(17442.557200, 26805.637800, 3194.496092, 462.388013, 90.000000, X, Y) && !ellipse(21381.320000, 20942.482000, 1597.248046, 798.136823, 0.000000, X, Y) && !ellipse(28140.786000, 25738.206000, 10091.136290, 10091.136290, 0.000000, X, Y) && !ellipse(21099.026000, 22898.252000, 796.192023, 796.192023, 0.000000, X, Y)
[Sun May 13 06:11:55 2012] Writing fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src53.gif
[Sun May 13 07:43:02 2012] Mean detx,y = (3608.63, 5401.33) 
[Sun May 13 07:43:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 13 07:44:23 2012] Binned source spectrum to 10 counts/bin
[Sun May 13 07:44:23 2012] Setting source spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sun May 13 07:44:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Tue May 15 01:58:28 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:28 2012] Error reading totcts from fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Tue May 15 01:58:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:34 2012] Using photon index=1.80, rate=0.002, arf fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src53.arf
[Tue May 15 01:58:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:34 2012] Updating source flux to 2.9e-14
[Tue May 15 01:58:49 2012] Flag p found in src. 53 procflags, skipping spectral fitting
[Tue May 15 01:58:49 2012] Flag c found in src. 53 procflags, skipping spectral fitting