[Sun May  6 01:20:26 2012] Detection parameters:
  Position = (314.5, 287.0) = 17 45 30.44 -28 59 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 417.6 +/- 39.1
  Background counts = 318.9
  Rate = 0.005 +/- 0.0004

[Sun May  6 01:20:35 2012] Off-axis axis estimate = 1.43'
[Sun May  6 14:08:58 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Sun May  6 14:08:58 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.090
[Sun May  6 14:08:58 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.14"
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src23.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src23.csv
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src23.csv
[Mon May  7 05:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon May  7 05:17:41 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Tue May  8 12:13:52 2012] Spatial fit model total counts = 18095.400000, observed total counts = 18032.000000
[Tue May  8 12:13:52 2012] Offset between fit and detection position for source 44 = 3.996016 pixels
[Tue May  8 12:13:52 2012] Warning, changing simple spatial fit ID from 23 to 7
[Tue May  8 12:13:52 2012] 16002.090000 total counts/ 11483.400000 bgd. counts: snr = 42.167446
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 3.996016 pixels
  Position = (312.4, 283.6) = 17 45 31.15 -29 0 4.1
  Extent = 21.0" x 21.0", rotation angle = 360
  Source counts = 4518.7 +/- 126.5
  Background counts = 11483.4
  Rate = 0.05 +/- 0.001
[Tue May  8 12:13:54 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:54 2012] Assessing source extent using major
[Tue May  8 12:13:54 2012] Source does appear to be extended
[Tue May  8 12:13:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 12:13:54 2012] Source is confused with source 5
[Thu May 10 00:04:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 00:04:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 10 00:04:04 2012] Initial guess for spatial extent in simple fitting = 21.02"
[Thu May 10 00:04:04 2012] source mask rpix=4.8, npix_max = 113, mask sum = 121, frac = 1.064
[Thu May 10 00:04:04 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 21.02"
[Fri May 11 06:42:15 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src20.ximg exists
[Fri May 11 06:42:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src20.csv
[Fri May 11 06:42:15 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri May 11 06:42:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src20.csv
[Fri May 11 06:42:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:42:18 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri May 11 06:42:18 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri May 11 06:42:18 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat May 12 00:41:53 2012] Spatial fit model total counts = 17814.600000, observed total counts = 18032.000000
[Sat May 12 00:41:53 2012] Offset between fit and detection position for source 44 = 1.427020 pixels
[Sat May 12 00:41:53 2012] Warning, changing simple spatial fit ID from 20 to 7
[Sat May 12 00:41:53 2012] 15109.820000 total counts/ 13200.700000 bgd. counts: snr = 16.616316
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 1.427020 pixels
  Position = (311.7, 282.4) = 17 45 31.36 -29 0 9.6
  Extent = 14.6 (14.5-29.1)", rotation angle = 0
  Source counts = 1909.1 +/- 122.9
  Background counts = 13200.7
  Rate = 0.02 +/- 0.001
[Sat May 12 00:41:54 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:54 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:41:54 2012] Source does appear to be extended
[Sat May 12 00:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 13 06:11:54 2012] Counts = 1909.120000, rescaling region sizes by 2.000000
[Sun May 13 06:11:54 2012] XMMSAS src. selection expression = ellipse(27071.550000, 24518.424000, 1747.380050, 1747.380050, 0.000000, X, Y)
[Sun May 13 06:11:54 2012] Writing source region out to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src44_src.reg
[Sun May 13 06:11:54 2012] Extracting stamp from image fullrun_mos1_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (211, 182) - (412, 383)
[Sun May 13 06:11:54 2012] XMMSAS bgd. selection expression = annulus(27071.550000, 24518.424000, 5824.600168, 11649.200335, X, Y) && !ellipse(25949.510040, 22885.001400, 1652.781648, 1652.781648, 0.000000, X, Y) && !ellipse(25809.271057, 22760.044250, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24828.075980, 24186.618400, 805.824023, 805.824023, 0.000000, X, Y) && !ellipse(24051.066000, 24400.946000, 7141.776206, 7141.776206, 0.000000, X, Y) && !ellipse(21733.669662, 20741.126785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25633.664764, 24050.603546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26671.730774, 22670.134338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25870.265045, 22410.175110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.777405, 23986.341217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27390.740800, 16245.266200, 556.446416, 455.226413, 133.235370, X, Y) && !ellipse(23395.466400, 26566.004000, 259.255207, 259.255207, 0.000000, X, Y) && !ellipse(23351.311310, 26047.302399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24316.742700, 26155.282400, 435.305613, 435.305613, 0.000000, X, Y) && !ellipse(26219.112000, 25001.563354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23010.738000, 23211.454000, 1345.512039, 1345.512039, 0.000000, X, Y) && !ellipse(25861.110504, 28758.867889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.522000, 25438.655400, 2168.144062, 2168.144062, 0.000000, X, Y) && !ellipse(20944.846000, 22009.116200, 1955.696056, 1955.696056, 0.000000, X, Y) && !ellipse(25710.308600, 20283.588000, 1171.344034, 1171.344034, 0.000000, X, Y) && !ellipse(23798.261800, 18826.657400, 478.563214, 478.563214, 0.000000, X, Y) && !ellipse(21425.297302, 19722.066803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26935.746887, 26227.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24017.756000, 22659.138000, 2528.736073, 2528.736073, 0.000000, X, Y) && !ellipse(26712.156000, 17669.457000, 497.320014, 497.320014, 0.000000, X, Y) && !ellipse(21671.740600, 28678.323000, 999.944029, 999.944029, 0.000000, X, Y) && !ellipse(16187.798800, 28141.809400, 579.648817, 579.648817, 0.000000, X, Y) && !ellipse(22197.608000, 21260.088000, 1472.104042, 1472.104042, 0.000000, X, Y) && !ellipse(19823.516270, 15836.815483, 716.745827, 358.473948, 355.303167, X, Y) && !ellipse(36850.473420, 26289.411600, 723.211221, 360.725610, 84.702754, X, Y) && !ellipse(20654.284000, 30394.084000, 1783.352051, 707.310420, 357.081897, X, Y) && !ellipse(19125.631000, 20632.028000, 1589.720046, 432.684812, 359.854000, X, Y) && !ellipse(19571.201401, 21433.539841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25358.060840, 26231.826000, 1070.192031, 440.412013, 0.001000, X, Y) && !ellipse(16857.675171, 26752.653412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15970.256851, 21874.428696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25101.552000, 20018.973600, 1425.784041, 1425.784041, 0.000000, X, Y) && !ellipse(20686.630000, 23037.709600, 1592.384046, 1592.384046, 0.000000, X, Y) && !ellipse(22997.864000, 20784.946000, 1420.208041, 1420.208041, 0.000000, X, Y) && !ellipse(19920.360000, 20831.466000, 648.032019, 648.032019, 0.000000, X, Y) && !ellipse(22753.676000, 27261.324000, 1201.648035, 1201.648035, 0.000000, X, Y) && !ellipse(25781.453800, 19877.304000, 1386.392040, 1386.392040, 0.000000, X, Y) && !ellipse(22732.899231, 19787.547791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27903.513600, 27017.366600, 838.664024, 838.664024, 0.000000, X, Y) && !ellipse(21646.097504, 15429.696869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26271.115000, 25624.274000, 1092.776031, 1092.776031, 0.000000, X, Y) && !ellipse(21730.010000, 22068.458000, 2691.024077, 2691.024077, 0.000000, X, Y) && !ellipse(27965.128000, 20331.746000, 1377.592040, 1377.592040, 0.000000, X, Y) && !ellipse(15988.740000, 26863.724200, 1744.232050, 488.837614, 93.074661, X, Y) && !ellipse(19261.902435, 28644.600739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28141.581543, 24645.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25704.689453, 26021.336212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22602.964000, 21840.382000, 1329.072038, 1329.072038, 0.000000, X, Y) && !ellipse(28542.969200, 28975.622600, 397.776011, 397.776011, 0.000000, X, Y) && !ellipse(22810.258000, 20915.493600, 1420.072041, 821.912024, 213.674000, X, Y) && !ellipse(27346.452000, 25280.736000, 1158.160033, 1158.160033, 0.000000, X, Y) && !ellipse(26980.040000, 19981.870200, 1431.344041, 1431.344041, 0.000000, X, Y) && !ellipse(22657.750000, 22852.844000, 1272.632037, 1272.632037, 0.000000, X, Y) && !ellipse(18893.630772, 29403.146084, 1553.776045, 495.525914, 352.142238, X, Y) && !ellipse(20472.423218, 20642.515015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35307.139221, 34694.199158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17389.506744, 17025.114594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25741.170000, 26750.104000, 1049.208030, 1049.208030, 0.000000, X, Y) && !ellipse(27003.528000, 19832.586000, 1431.344041, 1431.344041, 0.000000, X, Y) && !ellipse(20743.762000, 22726.098000, 1435.120041, 1435.120041, 0.000000, X, Y) && !ellipse(31905.539581, 28995.354004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18551.330307, 28637.562256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17442.557200, 26805.637800, 3194.496092, 462.388013, 90.000000, X, Y) && !ellipse(21381.320000, 20942.482000, 1597.248046, 798.136823, 0.000000, X, Y) && !ellipse(36022.571381, 36314.128113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27815.212000, 21107.678000, 823.616024, 823.616024, 0.000000, X, Y) && !ellipse(16598.196503, 32243.551361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22412.320374, 29535.822388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32586.530701, 16538.883148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28140.786000, 25738.206000, 10091.136290, 10091.136290, 0.000000, X, Y) && !ellipse(28548.106354, 23439.707855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15870.423767, 33076.603973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21099.026000, 22898.252000, 796.192023, 796.192023, 0.000000, X, Y) && !ellipse(17481.435806, 32107.961670, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 13 06:11:54 2012] Writing fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src44.gif
[Sun May 13 07:28:41 2012] Mean detx,y = (536.08, -1938.55) 
[Sun May 13 07:28:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 13 07:30:37 2012] Binned source spectrum to 10 counts/bin
[Sun May 13 07:30:38 2012] Setting source spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun May 13 07:30:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue May 15 01:58:27 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:27 2012] Error reading totcts from fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue May 15 01:58:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:34 2012] Using photon index=1.80, rate=0.0196, arf fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src44.arf
[Tue May 15 01:58:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:34 2012] Updating source flux to 1.9e-13
[Tue May 15 01:58:49 2012] Flag c found in src. 44 procflags, skipping spectral fitting