[Sun May  6 01:20:26 2012] Detection parameters:
  Position = (317.0, 302.4) = 17 45 29.60 -28 58 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 394.8 +/- 31.0
  Background counts = 275.9
  Rate = 0.005 +/- 0.0004

[Sun May  6 01:20:35 2012] Off-axis axis estimate = 1.38'
[Sun May  6 14:08:58 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Sun May  6 14:08:58 2012] source mask rpix=1.6, npix_max = 18, mask sum = 17, frac = 0.931
[Sun May  6 14:08:58 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.12"
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src20.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src20.csv
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src20.csv
[Mon May  7 05:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon May  7 05:17:41 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue May  8 12:13:52 2012] Warning, spatial fit 20 centroid is now closest to src. 39
[Tue May  8 12:13:52 2012] Spatial fit model total counts = 3762.340000, observed total counts = 3741.000000
[Tue May  8 12:13:52 2012] Offset between fit and detection position for source 40 = 0.154927 pixels
[Tue May  8 12:13:52 2012] Warning, changing simple spatial fit ID from 20 to 51
[Tue May  8 12:13:52 2012] 3651.528800 total counts/ 3554.310000 bgd. counts: snr = 1.630694
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.154927 pixels
  Position = (316.9, 302.5) = 17 45 29.65 -28 58 42.2
  Extent = 6.4 (4.0-9.3)", rotation angle = 0
  Source counts = 97.2 +/- 60.4
  Background counts = 3554.3
  Rate = 0.001 +/- 0.0006
  Deleting source due to low Poisson probability