[Sun May  6 01:20:26 2012] Detection parameters:
  Position = (310.2, 302.0) = 17 45 31.88 -28 58 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 378.4 +/- 33.4
  Background counts = 302.5
  Rate = 0.005 +/- 0.0004

[Sun May  6 01:20:35 2012] Off-axis axis estimate = 0.89'
[Sun May  6 14:08:58 2012] Using EEF radius (= 6.87 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 6.87"
[Sun May  6 14:08:58 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.693
[Sun May  6 14:08:58 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 6.87"
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src24.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src24.csv
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src24.csv
[Mon May  7 05:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon May  7 05:17:41 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Tue May  8 12:13:52 2012] Source 39 is offset by -0.291369 and 5.565473 pixels which is larger than
2 X fitted extent = 2.403582 x 2.403582, not incorporating fit results
[Tue May  8 12:13:52 2012] Warning, spatial fit 24 centroid is now closest to src. 82
[Tue May  8 12:13:52 2012] Source 39 is offset by -6.662436 and -0.273424 pixels which is larger than
2 X fitted extent = 3.054805 x 3.054805, not incorporating fit results
[Tue May  8 12:13:54 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:54 2012] Assessing source extent using major
[Tue May  8 12:13:54 2012] Source does appear to be extended
[Tue May  8 12:13:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:04:04 2012] Using EEF radius (= 6.87 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:04:04 2012] Initial guess for spatial extent in simple fitting = 6.87"
[Thu May 10 00:04:04 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.693
[Thu May 10 00:04:04 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 6.87"
[Fri May 11 06:42:15 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src21.ximg exists
[Fri May 11 06:42:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src21.csv
[Fri May 11 06:42:15 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri May 11 06:42:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src21.csv
[Fri May 11 06:42:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 06:42:18 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri May 11 06:42:18 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri May 11 06:42:18 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat May 12 00:41:53 2012] Warning, spatial fit 21 centroid is now closest to src. 82
[Sat May 12 00:41:54 2012] Source 39 is offset by -3.800602 and -1.882044 pixels which is larger than
2 X fitted extent = 6.097379 x 1.282405, not incorporating fit results
[Sat May 12 00:41:54 2012] Source 39 is offset by -1.466358 and 9.296303 pixels which is larger than
2 X fitted extent = 5.716782 x 5.716782, not incorporating fit results
[Sat May 12 00:41:54 2012] Source 39 is offset by -7.196679 and -0.433722 pixels which is larger than
2 X fitted extent = 2.850147 x 2.850147, not incorporating fit results
[Sat May 12 00:41:54 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:54 2012] Assessing source extent using major
[Sat May 12 00:41:54 2012] Source does appear to be extended
[Sat May 12 00:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 00:41:54 2012] Source is confused with source 43
[Sat May 12 00:41:54 2012] Source is confused with source 89
[Sun May 13 06:11:54 2012] XMMSAS src. selection expression = ellipse(26935.746887, 26227.292145, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 13 06:11:54 2012] Writing source region out to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src39_src.reg
[Sun May 13 06:11:54 2012] Extracting stamp from image fullrun_mos1_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (273, 265) - (348, 340)
[Sun May 13 06:11:54 2012] XMMSAS bgd. selection expression = annulus(26935.746887, 26227.292145, 1087.500000, 2175.000000, X, Y) && !ellipse(25949.510040, 22885.001400, 1652.781648, 1652.781648, 0.000000, X, Y) && !ellipse(25809.271057, 22760.044250, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24828.075980, 24186.618400, 805.824023, 805.824023, 0.000000, X, Y) && !ellipse(24051.066000, 24400.946000, 7141.776206, 7141.776206, 0.000000, X, Y) && !ellipse(25633.664764, 24050.603546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.777405, 23986.341217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.112000, 25001.563354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25861.110504, 28758.867889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.522000, 25438.655400, 2168.144062, 2168.144062, 0.000000, X, Y) && !ellipse(27071.550000, 24518.424000, 1164.920034, 1164.920034, 0.000000, X, Y) && !ellipse(24017.756000, 22659.138000, 2528.736073, 2528.736073, 0.000000, X, Y) && !ellipse(25358.060840, 26231.826000, 1070.192031, 440.412013, 0.001000, X, Y) && !ellipse(27903.513600, 27017.366600, 838.664024, 838.664024, 0.000000, X, Y) && !ellipse(26271.115000, 25624.274000, 1092.776031, 1092.776031, 0.000000, X, Y) && !ellipse(28141.581543, 24645.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25704.689453, 26021.336212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27346.452000, 25280.736000, 1158.160033, 1158.160033, 0.000000, X, Y) && !ellipse(25741.170000, 26750.104000, 1049.208030, 1049.208030, 0.000000, X, Y) && !ellipse(28140.786000, 25738.206000, 10091.136290, 10091.136290, 0.000000, X, Y) && !ellipse(28548.106354, 23439.707855, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 13 06:11:54 2012] Writing fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src39.gif
[Sun May 13 07:30:56 2012] Mean detx,y = (-1623.71, -2379.34) 
[Sun May 13 07:30:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 13 07:31:35 2012] Binned source spectrum to 10 counts/bin
[Sun May 13 07:31:35 2012] Setting source spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun May 13 07:31:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Mon May 14 01:48:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 14 01:48:05 2012] rmf not generated due to insufficient counts
[Tue May 15 01:58:27 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:28 2012] Error reading totcts from fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue May 15 01:58:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:34 2012] Using photon index=1.80, rate=0.00476, arf fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src39.arf
[Tue May 15 01:58:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:34 2012] Updating source flux to 5.4e-14
[Tue May 15 01:58:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting