[Sun May  6 01:20:25 2012] Detection parameters:
  Position = (279.7, 307.9) = 17 45 41.99 -28 58 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 347.0 +/- 36.5
  Background counts = 361.9
  Rate = 0.004 +/- 0.0004

[Sun May  6 01:20:35 2012] Off-axis axis estimate = 1.53'
[Sun May  6 14:08:58 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Sun May  6 14:08:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.863
[Sun May  6 14:08:58 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.19"
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src31.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src31.csv
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src31.csv
[Mon May  7 05:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon May  7 05:17:41 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue May  8 12:13:52 2012] Spatial fit model total counts = 6835.420000, observed total counts = 6829.000000
[Tue May  8 12:13:52 2012] Offset between fit and detection position for source 37 = 0.688633 pixels
[Tue May  8 12:13:52 2012] Warning, changing simple spatial fit ID from 31 to 11
[Tue May  8 12:13:52 2012] 6648.021000 total counts/ 6515.090000 bgd. counts: snr = 1.646896
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.688633 pixels
  Position = (280.0, 308.5) = 17 45 41.88 -28 58 15.9
  Extent = 7.1 (4.8-14.2)", rotation angle = 0
  Source counts = 132.9 +/- 81.5
  Background counts = 6515.1
  Rate = 0.001 +/- 0.0008
  Deleting source due to low Poisson probability