[Sun May  6 01:20:25 2012] Detection parameters:
  Position = (250.3, 330.8) = 17 45 51.74 -28 56 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 323.6 +/- 34.3
  Background counts = 315.9
  Rate = 0.004 +/- 0.0004

[Sun May  6 01:20:35 2012] Off-axis axis estimate = 4.21'
[Sun May  6 14:08:58 2012] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 8.53"
[Sun May  6 14:08:58 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.031
[Sun May  6 14:08:58 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.53"
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src29.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src29.csv
[Mon May  7 05:17:38 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon May  7 05:17:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src29.csv
[Mon May  7 05:17:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon May  7 05:17:41 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon May  7 05:17:41 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue May  8 12:13:52 2012] Spatial fit model total counts = 4037.360000, observed total counts = 4164.000000
[Tue May  8 12:13:52 2012] Offset between fit and detection position for source 35 = 0.866566 pixels
[Tue May  8 12:13:52 2012] 3972.414000 total counts/ 3373.310000 bgd. counts: snr = 10.315115
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.866566 pixels
  Position = (249.7, 330.2) = 17 45 51.94 -28 56 41.6
  Extent = 12.5 (10.2-15.7)", rotation angle = 0
  Source counts = 599.1 +/- 63.0
  Background counts = 3373.3
  Rate = 0.006 +/- 0.0006
[Tue May  8 12:13:54 2012] Vigneting correction estimate = 1.000000
[Tue May  8 12:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 12:13:54 2012] Assessing source extent using major axis lower bound
[Tue May  8 12:13:54 2012] Source does appear to be extended
[Tue May  8 12:13:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:04:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 00:04:04 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Thu May 10 00:04:04 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.076
[Thu May 10 00:04:04 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 12.50"
[Fri May 11 06:42:15 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src26.ximg exists
[Fri May 11 06:42:15 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri May 11 06:42:15 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src26 appears to have run properly
[Fri May 11 06:42:18 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri May 11 06:42:18 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri May 11 06:42:18 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sat May 12 00:41:54 2012] Warning, spatial fit 26 centroid is now closest to src. 71
[Sat May 12 00:41:54 2012] Vigneting correction estimate = 1.000000
[Sat May 12 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 00:41:54 2012] Assessing source extent using major axis lower bound
[Sat May 12 00:41:54 2012] Source does appear to be extended
[Sat May 12 00:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 13 06:11:55 2012] XMMSAS src. selection expression = ellipse(21671.740600, 28678.323000, 749.958022, 749.958022, 0.000000, X, Y)
[Sun May 13 06:11:55 2012] Writing source region out to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src35_src.reg
[Sun May 13 06:11:55 2012] Extracting stamp from image fullrun_mos1_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (207, 287) - (293, 373)
[Sun May 13 06:11:55 2012] XMMSAS bgd. selection expression = annulus(21671.740600, 28678.323000, 1249.930036, 2499.860072, X, Y) && !ellipse(24051.066000, 24400.946000, 7141.776206, 7141.776206, 0.000000, X, Y) && !ellipse(23395.466400, 26566.004000, 259.255207, 259.255207, 0.000000, X, Y) && !ellipse(23351.311310, 26047.302399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24316.742700, 26155.282400, 435.305613, 435.305613, 0.000000, X, Y) && !ellipse(20654.284000, 30394.084000, 1783.352051, 707.310420, 357.081897, X, Y) && !ellipse(22753.676000, 27261.324000, 1201.648035, 1201.648035, 0.000000, X, Y) && !ellipse(19261.902435, 28644.600739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18893.630772, 29403.146084, 1553.776045, 495.525914, 352.142238, X, Y) && !ellipse(18551.330307, 28637.562256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17442.557200, 26805.637800, 3194.496092, 462.388013, 90.000000, X, Y) && !ellipse(22412.320374, 29535.822388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28140.786000, 25738.206000, 10091.136290, 10091.136290, 0.000000, X, Y)
[Sun May 13 06:11:55 2012] Writing fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src35.gif
[Sun May 13 07:36:17 2012] Mean detx,y = (-4288.38, 2772.41) 
[Sun May 13 07:36:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 13 07:36:57 2012] Binned source spectrum to 10 counts/bin
[Sun May 13 07:36:58 2012] Setting source spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun May 13 07:36:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue May 15 01:58:28 2012] Updating aperture counts using extracted products
[Tue May 15 01:58:28 2012] Error reading totcts from fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue May 15 01:58:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 01:58:34 2012] Using photon index=1.80, rate=0.00616, arf fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src35.arf
[Tue May 15 01:58:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 01:58:34 2012] Updating source flux to 7.1e-14