[Sun May 6 01:20:24 2012] Detection parameters: Position = (162.5, 387.8) = 17 46 20.80 -28 52 27.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 133.5 +/- 26.9 Background counts = 183.0 Rate = 0.001 +/- 0.0003 [Sun May 6 01:20:35 2012] Off-axis axis estimate = 11.80' [Sun May 6 14:08:58 2012] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting [Sun May 6 14:08:58 2012] Initial guess for spatial extent in simple fitting = 12.33" [Sun May 6 14:08:58 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.102 [Sun May 6 14:08:58 2012] Giving source the simple spatial ID 105 for pass 0, mean size = 12.33" [Tue May 8 12:13:54 2012] Vigneting correction estimate = 1.000000 [Tue May 8 12:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 8 12:13:54 2012] Assessing source extent using major [Tue May 8 12:13:54 2012] Source does appear to be extended [Tue May 8 12:13:54 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 8 12:13:54 2012] Source is confused with source 13 [Thu May 10 00:04:05 2012] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting [Thu May 10 00:04:05 2012] Initial guess for spatial extent in simple fitting = 12.33" [Thu May 10 00:04:05 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.102 [Thu May 10 00:04:05 2012] Giving source the simple spatial ID 89 for pass 1, mean size = 12.33" [Fri May 11 06:42:17 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src89.ximg exists [Fri May 11 06:42:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src89.csv [Fri May 11 06:42:17 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src89_1.ximg exists [Fri May 11 06:42:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src89.csv [Fri May 11 06:42:17 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src89_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 11 06:42:20 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src89.ximg exists [Fri May 11 06:42:20 2012] fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src89_1.ximg exists [Fri May 11 06:42:20 2012] Fit fullrun_mos1_xmm0505670101_pi300-10000_cl_pass1_tfrozen_src89 appears to have run properly [Sat May 12 00:41:54 2012] Source 25 is offset by -5.284417 and -1.014326 pixels which is larger than 2 X fitted extent = 1.442966 x 1.442966, not incorporating fit results [Sat May 12 00:41:54 2012] Warning: source 89 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 15.887303 pixels away [Sat May 12 00:41:54 2012] Source 25 is offset by -8.904992 and -3.831733 pixels which is larger than 2 X fitted extent = 1.329738 x 1.329738, not incorporating fit results [Sat May 12 00:41:54 2012] Vigneting correction estimate = 1.000000 [Sat May 12 00:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 12 00:41:54 2012] Assessing source extent using major [Sat May 12 00:41:54 2012] Source does appear to be extended [Sat May 12 00:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 13 06:12:06 2012] XMMSAS src. selection expression = ellipse(14085.269684, 33690.635254, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 13 06:12:06 2012] Writing source region out to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src25_src.reg [Sun May 13 06:12:06 2012] Extracting stamp from image fullrun_mos1_xmm0505670101_pi300-10000_cl_sm2.00.img.gz, (125, 350) - (200, 425) [Sun May 13 06:12:06 2012] XMMSAS bgd. selection expression = annulus(14085.269684, 33690.635254, 1087.500000, 2175.000000, X, Y) && !ellipse(13751.554200, 33175.347800, 548.718416, 548.718416, 0.000000, X, Y) && !ellipse(13584.341324, 33903.194244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13353.582000, 32978.740000, 1996.128057, 1996.128057, 0.000000, X, Y) && !ellipse(16598.196503, 32243.551361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12930.686000, 31298.150000, 1543.368044, 1543.368044, 0.000000, X, Y) && !ellipse(15870.423767, 33076.603973, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 13 06:12:06 2012] Writing fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src25.gif [Sun May 13 09:20:49 2012] Mean detx,y = (-9593.04, 10253.77) [Sun May 13 09:20:51 2012] Setting backscal keywords in source and bgd. spectrum [Sun May 13 09:21:07 2012] Binned source spectrum to 10 counts/bin [Sun May 13 09:21:07 2012] Setting source spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src25_src_b10.pi.gz [Sun May 13 09:21:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src25_bgd.pi.gz [Mon May 14 20:58:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 14 20:58:54 2012] rmf not generated due to insufficient counts [Tue May 15 01:58:32 2012] Updating aperture counts using extracted products [Tue May 15 01:58:32 2012] Error reading totcts from fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src25_src_b10.pi.gz [Tue May 15 01:58:38 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 15 01:58:38 2012] Using photon index=1.80, rate=0.00137, arf fullrun_mos1_xmm0505670101_pi300-10000_pass1_cl_src25.arf [Tue May 15 01:58:38 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 15 01:58:38 2012] Updating source flux to 3.3e-14 [Tue May 15 01:58:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting